On 11/22/2018 6:13 AM, Stuart Henderson wrote:
On 2018-11-22, Radek <alee...@gmail.com> wrote:
Hello,
does anybody run OpenBSD 6.3/amd64 or 6.4/amd64 on SUPERMICRO X7SPA-HF D510?
Does it work well together?
I need to build a backup server (rsync only) with 2-3x 4TB HDD, 3U/4U Rack case
for better cooling. RAID is not needed.
It must be as silent as possible. Low power consumption is also welcomed.
Thanks!
Not sure if I have that *exact* board but I have something very similar,
I wouldn't expect any problems with this.
I am running the X7SPA-HF-D525 version (Same board, different chip. The
D525 and D510 are really just the same chip anyway, just that the D510
has a slightly different set of bits burned into the configuration fuses).
Everything seems to work just fine, only problems are that it can't
support a lot of graphical modes (xenocara will run, just not very well,
since the gpu only has 8 MB of memory and it comes from the main pool of
memory anyway). That and you can't communicate with the IPMI interface
from within the OS (But doesn't prevent you from using the IPMI
interface, you'd just need to do any configuration of it via BIOS or the
IPMI's web interface).
dmesg from my system is below
OpenBSD 6.4 (GENERIC.MP) #0: Sat Nov 17 22:15:46 CET 2018
r...@syspatch-64-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4277665792 (4079MB)
avail mem = 4138745856 (3947MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9ac00 (19 entries)
bios0: vendor American Megatrends Inc. version "1.2" date 09/14/11
bios0: Supermicro X7SPA-HF
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET EINJ BERT ERST HEST
acpi0: wakeup devices P0P1(S4) USB0(S4) USB1(S4) USB2(S4) USB5(S4)
EUSB(S4) USB3(S4) USB4(S4) USB6(S4) USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4)
P0P7(S4) P0P8(S4) P0P9(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1800.30 MHz, 06-1c-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 207MHz
cpu0: mwait min=64, max=64, C-substates=0.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Atom(TM) CPU D525 @ 1.80GHz, 1872.00 MHz, 06-1c-0a
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 512KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 20, 24 pins, remapped
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (P0P1)
acpiprt2 at acpi0: bus 1 (P0P4)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus 2 (P0P8)
acpiprt7 at acpi0: bus 3 (P0P9)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:25:90:62:cc:46
ppb2 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:25:90:62:cc:47
uhci0 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 3 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 3 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 3 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci4 at ppb3 bus 4
vga1 at pci4 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1001FALS-0, 05.0> SCSI3
0/direct fixed naa.50014ee2059bdbc4
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 3
int 18
iic0 at ichiic0
lm1 at iic0 addr 0x2d: W83627DHG
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x25
lm2 at wbsio0 port 0xca0/8: W83627DHG
lm1: disabling sensors due to alias with lm2
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Peppercon AG
Multidevice" rev 2.00/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "Peppercon AG
Multidevice" rev 2.00/0.01 addr 2
uhidev1: iclass 3/0
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f3f136d46a834706.a) swap on sd0b dump on sd0b
