I recently acquired a Supermicro 1019D-FRN8TP server with a X11SDV-8C-TP8
motherboard.
When i attempt to install 6.5, (via PXE or USB), none of the network interfaces
are detected.
A dmesg appears below, followed by a dmesg and ifconfig -a from successful
attempt installing FreeBSD 12.0
Any advice/recommendations about how I can get OpenBSD to see the network
interfaces?
I’m hoping there is a BIOS setting that will help, but haven’t found it yet…..
In addition, I haven’t been able to get OpenBSD to see the M.2 nvme drive in
this chassis, so installed a SATA SSD for now….Any way to get OpenBSD to
see/use/boot from the M.2 nvme drive?
=================
OpenBSD 6.5 dmesg:
=================
OpenBSD 6.5 (RAMDISK_CD) #3: Sat Apr 13 14:55:38 MDT 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 68336508928 (65170MB)
avail mem = 66261471232 (63191MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x6de8d000 (62 entries)
bios0: vendor American Megatrends Inc. version "1.1" date 01/19/2019
bios0: King Star Computer, inc. X11SDV-8C-TP8F
acpi0 at bios0: rev 2, can't enable ACPI
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(R) D-2146NT CPU @ 2.30GHz, 2295.15 MHz, 06-55-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PT,AVX512CD,AVX512BW,AVX512VL,PKU,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE
pci0 at mainbus0 bus 0
0:4:0: mem address conflict 0x383ffff1c000/0x4000
0:4:1: mem address conflict 0x383ffff18000/0x4000
0:4:2: mem address conflict 0x383ffff14000/0x4000
0:4:3: mem address conflict 0x383ffff10000/0x4000
0:4:4: mem address conflict 0x383ffff0c000/0x4000
0:4:5: mem address conflict 0x383ffff08000/0x4000
0:4:6: mem address conflict 0x383ffff04000/0x4000
0:4:7: mem address conflict 0x383ffff00000/0x4000
0:20:2: mem address conflict 0x383ffff23000/0x1000
0:22:0: mem address conflict 0x383ffff22000/0x1000
0:22:1: mem address conflict 0x383ffff21000/0x1000
0:22:4: mem address conflict 0x383ffff20000/0x1000
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2020 rev 0x04
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 0 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 1 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 2 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 3 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 4 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 5 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 6 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 7 not configured
vendor "Intel", unknown product 0x2024 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 5 function 0 not configured
vendor "Intel", unknown product 0x2025 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 5 function 2 not configured
vendor "Intel", unknown product 0x2026 (class system subclass interrupt, rev
0x04) at pci0 dev 5 function 4 not configured
vendor "Intel", unknown product 0x2014 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 8 function 0 not configured
vendor "Intel", unknown product 0x2015 (class DASP subclass Time and Frequency,
rev 0x04) at pci0 dev 8 function 1 not configured
vendor "Intel", unknown product 0x2016 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 8 function 2 not configured
"Intel C620 MROM" rev 0x04 at pci0 dev 17 function 0 not configured
vendor "Intel", unknown product 0xa1ed (class undefined unknown subclass 0x00,
rev 0x04) at pci0 dev 17 function 1 not configured
ahci0 at pci0 dev 17 function 5 "Intel C620 AHCI" rev 0x04: irq 11, AHCI 1.3.1
ahci0: port 2: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 2 lun 0: <ATA, SanDisk SDSSDHII, X312> SCSI3 0/direct
fixed naa.5001b44e1c7b8a66
sd0: 915715MB, 512 bytes/sector, 1875385008 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel C620 xHCI" rev 0x04: irq 11, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel C620 Thermal" rev 0x04 at pci0 dev 20 function 2 not configured
"Intel C620 MEI" rev 0x04 at pci0 dev 22 function 0 not configured
"Intel C620 MEI" rev 0x04 at pci0 dev 22 function 1 not configured
"Intel C620 MEI" rev 0x04 at pci0 dev 22 function 4 not configured
ahci1 at pci0 dev 23 function 0 "Intel C620 AHCI" rev 0x04: irq 11, AHCI 1.3.1
scsibus1 at ahci1: 32 targets
ppb0 at pci0 dev 28 function 0 "Intel C620 PCIE" rev 0xf4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel C620 PCIE" rev 0xf4: irq 11
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x04
pci3 at ppb2 bus 3
vga1 at pci3 dev 0 function 0 "ASPEED Technology AST2000" rev 0x41
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
vendor "Intel", unknown product 0xa1c8 (class bridge subclass ISA, rev 0x04) at
pci0 dev 31 function 0 not configured
"Intel C620 Power" rev 0x04 at pci0 dev 31 function 2 not configured
"Intel C620 SMBus" rev 0x04 at pci0 dev 31 function 4 not configured
"Intel C620 SPI" rev 0x04 at pci0 dev 31 function 5 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
uhub1 at uhub0 port 1 configuration 1 interface 0 "Apple, Inc. Keyboard Hub"
rev 2.00/96.15 addr 2
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple, Inc Apple Keyboard"
rev 2.00/0.69 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay1
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple, Inc Apple Keyboard"
rev 2.00/0.69 addr 3
uhidev1: iclass 3/0
uhid at uhidev1 not configured
uhidev2 at uhub1 port 3 configuration 1 interface 0 "Primax Electronics Apple
Optical USB Mouse" rev 1.10/1.10 addr 4
uhidev2: iclass 3/1
uhid at uhidev2 not configured
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer" rev
2.00/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer, 1.00> SCSI2 0/direct removable
serial.07815530800CF122F534
sd1: 3827MB, 512 bytes/sector, 7837696 sectors
uhub2 at uhub0 port 3 configuration 1 interface 0 "vendor 0x0557 product
0x7000" rev 2.00/0.00 addr 6
uhidev3 at uhub2 port 1 configuration 1 interface 0 "vendor 0x0557 product
0x2419" rev 1.10/1.00 addr 7
uhidev3: iclass 3/1
ukbd1 at uhidev3
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay1
uhidev4 at uhub2 port 1 configuration 1 interface 1 "vendor 0x0557 product
0x2419" rev 1.10/1.00 addr 7
uhidev4: iclass 3/1
uhid at uhidev4 not configured
uhub3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x05e3 USB2.0 Hub"
rev 2.00/32.98 addr 8
uhub4 at uhub3 port 2 configuration 1 interface 0 "vendor 0x05e3 USB2.0 Hub"
rev 2.00/32.98 addr 9
softraid0 at root
scsibus3 at softraid0: 256 targets
PXE boot MAC address ac:1f:6b:79:81:a4, interface unknown
root on rd0a swap on rd0b dump on rd0b
# dmesg
OpenBSD 6.5 (RAMDISK_CD) #3: Sat Apr 13 14:55:38 MDT 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 68336508928 (65170MB)
avail mem = 66261471232 (63191MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x6de8d000 (62 entries)
bios0: vendor American Megatrends Inc. version "1.1" date 01/19/2019
bios0: King Star Computer, inc. X11SDV-8C-TP8F
acpi0 at bios0: rev 2, can't enable ACPI
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Xeon(R) D-2146NT CPU @ 2.30GHz, 2295.15 MHz, 06-55-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,MPX,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PT,AVX512CD,AVX512BW,AVX512VL,PKU,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE
pci0 at mainbus0 bus 0
0:4:0: mem address conflict 0x383ffff1c000/0x4000
0:4:1: mem address conflict 0x383ffff18000/0x4000
0:4:2: mem address conflict 0x383ffff14000/0x4000
0:4:3: mem address conflict 0x383ffff10000/0x4000
0:4:4: mem address conflict 0x383ffff0c000/0x4000
0:4:5: mem address conflict 0x383ffff08000/0x4000
0:4:6: mem address conflict 0x383ffff04000/0x4000
0:4:7: mem address conflict 0x383ffff00000/0x4000
0:20:2: mem address conflict 0x383ffff23000/0x1000
0:22:0: mem address conflict 0x383ffff22000/0x1000
0:22:1: mem address conflict 0x383ffff21000/0x1000
0:22:4: mem address conflict 0x383ffff20000/0x1000
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x2020 rev 0x04
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 0 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 1 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 2 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 3 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 4 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 5 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 6 not configured
vendor "Intel", unknown product 0x2021 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 4 function 7 not configured
vendor "Intel", unknown product 0x2024 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 5 function 0 not configured
vendor "Intel", unknown product 0x2025 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 5 function 2 not configured
vendor "Intel", unknown product 0x2026 (class system subclass interrupt, rev
0x04) at pci0 dev 5 function 4 not configured
vendor "Intel", unknown product 0x2014 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 8 function 0 not configured
vendor "Intel", unknown product 0x2015 (class DASP subclass Time and Frequency,
rev 0x04) at pci0 dev 8 function 1 not configured
vendor "Intel", unknown product 0x2016 (class system subclass miscellaneous,
rev 0x04) at pci0 dev 8 function 2 not configured
"Intel C620 MROM" rev 0x04 at pci0 dev 17 function 0 not configured
vendor "Intel", unknown product 0xa1ed (class undefined unknown subclass 0x00,
rev 0x04) at pci0 dev 17 function 1 not configured
ahci0 at pci0 dev 17 function 5 "Intel C620 AHCI" rev 0x04: irq 11, AHCI 1.3.1
ahci0: port 2: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 2 lun 0: <ATA, SanDisk SDSSDHII, X312> SCSI3 0/direct
fixed naa.5001b44e1c7b8a66
sd0: 915715MB, 512 bytes/sector, 1875385008 sectors, thin
xhci0 at pci0 dev 20 function 0 "Intel C620 xHCI" rev 0x04: irq 11, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel C620 Thermal" rev 0x04 at pci0 dev 20 function 2 not configured
"Intel C620 MEI" rev 0x04 at pci0 dev 22 function 0 not configured
"Intel C620 MEI" rev 0x04 at pci0 dev 22 function 1 not configured
"Intel C620 MEI" rev 0x04 at pci0 dev 22 function 4 not configured
ahci1 at pci0 dev 23 function 0 "Intel C620 AHCI" rev 0x04: irq 11, AHCI 1.3.1
scsibus1 at ahci1: 32 targets
ppb0 at pci0 dev 28 function 0 "Intel C620 PCIE" rev 0xf4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 4 "Intel C620 PCIE" rev 0xf4: irq 11
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x04
pci3 at ppb2 bus 3
vga1 at pci3 dev 0 function 0 "ASPEED Technology AST2000" rev 0x41
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
vendor "Intel", unknown product 0xa1c8 (class bridge subclass ISA, rev 0x04) at
pci0 dev 31 function 0 not configured
"Intel C620 Power" rev 0x04 at pci0 dev 31 function 2 not configured
"Intel C620 SMBus" rev 0x04 at pci0 dev 31 function 4 not configured
"Intel C620 SPI" rev 0x04 at pci0 dev 31 function 5 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
uhub1 at uhub0 port 1 configuration 1 interface 0 "Apple, Inc. Keyboard Hub"
rev 2.00/96.15 addr 2
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Apple, Inc Apple Keyboard"
rev 2.00/0.69 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay1
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Apple, Inc Apple Keyboard"
rev 2.00/0.69 addr 3
uhidev1: iclass 3/0
uhid at uhidev1 not configured
uhidev2 at uhub1 port 3 configuration 1 interface 0 "Primax Electronics Apple
Optical USB Mouse" rev 1.10/1.10 addr 4
uhidev2: iclass 3/1
uhid at uhidev2 not configured
umass0 at uhub0 port 2 configuration 1 interface 0 "SanDisk Cruzer" rev
2.00/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer, 1.00> SCSI2 0/direct removable
serial.07815530800CF122F534
sd1: 3827MB, 512 bytes/sector, 7837696 sectors
uhub2 at uhub0 port 3 configuration 1 interface 0 "vendor 0x0557 product
0x7000" rev 2.00/0.00 addr 6
uhidev3 at uhub2 port 1 configuration 1 interface 0 "vendor 0x0557 product
0x2419" rev 1.10/1.00 addr 7
uhidev3: iclass 3/1
ukbd1 at uhidev3
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay1
uhidev4 at uhub2 port 1 configuration 1 interface 1 "vendor 0x0557 product
0x2419" rev 1.10/1.00 addr 7
uhidev4: iclass 3/1
uhid at uhidev4 not configured
uhub3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x05e3 USB2.0 Hub"
rev 2.00/32.98 addr 8
uhub4 at uhub3 port 2 configuration 1 interface 0 "vendor 0x05e3 USB2.0 Hub"
rev 2.00/32.98 addr 9
softraid0 at root
scsibus3 at softraid0: 256 targets
PXE boot MAC address ac:1f:6b:79:81:a4, interface unknown
root on rd0a swap on rd0b dump on rd0b
=================
FreeBSD 12.0 dmesg:
=================
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM
6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) D-2146NT CPU @ 2.30GHz (2294.67-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x50654 Family=0x6 Model=0x55 Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended
Features=0xd39ffffb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,MPX,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,AVX512CD,AVX512BW,AVX512VL>
Structured Extended Features2=0x8<PKU>
Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 68717379584 (65534 MB)
avail memory = 66472321024 (63392 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-31 on motherboard
ioapic2 <Version 2.0> irqs 32-39 on motherboard
ioapic3 <Version 2.0> irqs 40-47 on motherboard
ioapic4 <Version 2.0> irqs 48-55 on motherboard
Launching APs: 1 4 10 8 2 14 12 11 13 9 5 6 3 15 7
Timecounter "TSC-low" frequency 1147334314 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SUPERM> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 350
Event timer "HPET1" frequency 24000000 Hz quality 340
Event timer "HPET2" frequency 24000000 Hz quality 340
Event timer "HPET3" frequency 24000000 Hz quality 340
Event timer "HPET4" frequency 24000000 Hz quality 340
Event timer "HPET5" frequency 24000000 Hz quality 340
Event timer "HPET6" frequency 24000000 Hz quality 340
Event timer "HPET7" frequency 24000000 Hz quality 340
hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet1 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_syscontainer0: <System Container> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pci0: <dasp, performance counters> at device 8.1 (no driver attached)
pci0: <unknown> at device 17.0 (no driver attached)
pci0: <unknown> at device 17.1 (no driver attached)
ahci0: <Intel Lewisburg AHCI SATA controller> port
0x3070-0x3077,0x3060-0x3063,0x3020-0x303f mem
0xaa216000-0xaa217fff,0xaa219000-0xaa2190ff,0xaa180000-0xaa1fffff irq 16 at
device 17.5 numa-domain 0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Lewisburg USB 3.0 controller> mem 0xaa200000-0xaa20ffff irq 16 at
device 20.0 numa-domain 0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
pci0: <simple comms> at device 22.4 (no driver attached)
ahci1: <Intel Lewisburg AHCI SATA controller> port
0x3050-0x3057,0x3040-0x3043,0x3000-0x301f mem
0xaa214000-0xaa215fff,0xaa218000-0xaa2180ff,0xaa100000-0xaa17ffff irq 16 at
device 23.0 numa-domain 0 on pci0
ahci1: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich6: <AHCI channel> at channel 0 on ahci1
ahcich7: <AHCI channel> at channel 1 on ahci1
ahcich8: <AHCI channel> at channel 2 on ahci1
ahcich9: <AHCI channel> at channel 3 on ahci1
ahcich10: <AHCI channel> at channel 4 on ahci1
ahcich11: <AHCI channel> at channel 5 on ahci1
ahcich12: <AHCI channel> at channel 6 on ahci1
ahcich13: <AHCI channel> at channel 7 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem
0xa9000000-0xa9ffffff,0xaa000000-0xaa01ffff irq 16 at device 0.0 numa-domain 0
on pci3
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <serial bus> at device 31.5 (no driver attached)
pcib4: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 39 at device 0.0 numa-domain 0 on pci4
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
uart2: <MosChip MCS9922 PCIe to Peripheral Controller> port 0x7010-0x7017 mem
0xc5e03000-0xc5e03fff,0xc5e02000-0xc5e02fff irq 32 at device 0.0 numa-domain 0
on pci5
uart2: Using 1 MSI message
uart3: <MosChip MCS9922 PCIe to Peripheral Controller> port 0x7000-0x7007 mem
0xc5e01000-0xc5e01fff,0xc5e00000-0xc5e00fff irq 36 at device 0.1 numa-domain 0
on pci5
uart3: Using 1 MSI message
pcib6: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci6
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
nvme0: <Generic NVMe Device> mem 0xe0e00000-0xe0e03fff irq 42 at device 0.0
numa-domain 0 on pci7
pcib8: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci6
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xb060-0xb07f mem
0xe0d60000-0xe0d7ffff,0xe0d8c000-0xe0d8ffff irq 43 at device 0.0 numa-domain 0
on pci8
igb0: attach_pre capping queues at 8
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 8
igb0: pxm cpus: 8 queue msgs: 9 admincnt: 1
igb0: using 8 rx queues 8 tx queues
igb0: Using MSIX interrupts with 9 vectors
igb0: allocated for 8 tx_queues
igb0: allocated for 8 rx_queues
igb0: Ethernet address: ac:1f:6b:79:81:a4
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xb040-0xb05f mem
0xe0d40000-0xe0d5ffff,0xe0d88000-0xe0d8bfff irq 46 at device 0.1 numa-domain 0
on pci8
igb1: attach_pre capping queues at 8
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 8
igb1: pxm cpus: 8 queue msgs: 9 admincnt: 1
igb1: using 8 rx queues 8 tx queues
igb1: Using MSIX interrupts with 9 vectors
igb1: allocated for 8 tx_queues
igb1: allocated for 8 rx_queues
igb1: Ethernet address: ac:1f:6b:79:81:a5
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
igb2: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xb020-0xb03f mem
0xe0d20000-0xe0d3ffff,0xe0d84000-0xe0d87fff irq 44 at device 0.2 numa-domain 0
on pci8
igb2: attach_pre capping queues at 8
igb2: using 1024 tx descriptors and 1024 rx descriptors
igb2: msix_init qsets capped at 8
igb2: pxm cpus: 8 queue msgs: 9 admincnt: 1
igb2: using 8 rx queues 8 tx queues
igb2: Using MSIX interrupts with 9 vectors
igb2: allocated for 8 tx_queues
igb2: allocated for 8 rx_queues
igb2: Ethernet address: ac:1f:6b:79:81:a6
igb2: netmap queues/slots: TX 8/1024, RX 8/1024
igb3: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xb000-0xb01f mem
0xe0d00000-0xe0d1ffff,0xe0d80000-0xe0d83fff irq 45 at device 0.3 numa-domain 0
on pci8
igb3: attach_pre capping queues at 8
igb3: using 1024 tx descriptors and 1024 rx descriptors
igb3: msix_init qsets capped at 8
igb3: pxm cpus: 8 queue msgs: 9 admincnt: 1
igb3: using 8 rx queues 8 tx queues
igb3: Using MSIX interrupts with 9 vectors
igb3: allocated for 8 tx_queues
igb3: allocated for 8 rx_queues
igb3: Ethernet address: ac:1f:6b:79:81:a7
igb3: netmap queues/slots: TX 8/1024, RX 8/1024
pcib9: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 55 at device 0.0 numa-domain 0 on pci9
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> mem 0xfbe00000-0xfbe1ffff irq 48 at device 0.0
numa-domain 0 on pci10
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI PCI-PCI bridge> irq 40 at device 0.0 numa-domain 0 on pci11
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci12: <processor> at device 0.0 (no driver attached)
pcib13: <ACPI PCI-PCI bridge> irq 40 at device 2.0 numa-domain 0 on pci11
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pci13: <processor> at device 0.0 (no driver attached)
pcib14: <ACPI PCI-PCI bridge> irq 40 at device 3.0 numa-domain 0 on pci11
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
ixl0: <Intel(R) Ethernet Connection X722 for 10GBASE-T - 2.1.0-k> mem
0xfa000000-0xfaffffff,0xfb018000-0xfb01ffff irq 46 at device 0.0 numa-domain 0
on pci14
ixl0: fw 3.1.57069 api 1.5 nvm 3.33 etid 80001006 oem 1.262.0
ixl0: PF-ID[0]: VFs 32, MSIX 129, VF MSIX 5, QPs 384, MDIO shared
ixl0: using 1024 tx descriptors and 1024 rx descriptors
ixl0: msix_init qsets capped at 128
ixl0: pxm cpus: 8 queue msgs: 128 admincnt: 1
ixl0: using 8 rx queues 8 tx queues
ixl0: Using MSIX interrupts with 9 vectors
ixl0: Ethernet address: ac:1f:6b:79:8a:64
ixl0: Allocating 8 queues for PF LAN VSI; 8 queues active
ixl0: SR-IOV ready
ixl0: netmap queues/slots: TX 8/1024, RX 8/1024
ixl1: <Intel(R) Ethernet Connection X722 for 10GBASE-T - 2.1.0-k> mem
0xf9000000-0xf9ffffff,0xfb010000-0xfb017fff irq 46 at device 0.1 numa-domain 0
on pci14
ixl1: fw 3.1.57069 api 1.5 nvm 3.33 etid 80001006 oem 1.262.0
ixl1: PF-ID[1]: VFs 32, MSIX 129, VF MSIX 5, QPs 384, MDIO shared
ixl1: using 1024 tx descriptors and 1024 rx descriptors
ixl1: msix_init qsets capped at 128
ixl1: pxm cpus: 8 queue msgs: 128 admincnt: 1
ixl1: using 8 rx queues 8 tx queues
ixl1: Using MSIX interrupts with 9 vectors
ixl1: Ethernet address: ac:1f:6b:79:8a:65
ixl1: Allocating 8 queues for PF LAN VSI; 8 queues active
ixl1: SR-IOV ready
ixl1: netmap queues/slots: TX 8/1024, RX 8/1024
ixl2: <Intel(R) Ethernet Connection X722 for 10GbE SFP+ - 2.1.0-k> mem
0xf8000000-0xf8ffffff,0xfb008000-0xfb00ffff irq 46 at device 0.2 numa-domain 0
on pci14
ixl2: fw 3.1.57069 api 1.5 nvm 3.33 etid 80001006 oem 1.262.0
ixl2: PF-ID[2]: VFs 32, MSIX 129, VF MSIX 5, QPs 384, I2C
ixl2: using 1024 tx descriptors and 1024 rx descriptors
ixl2: msix_init qsets capped at 128
ixl2: pxm cpus: 8 queue msgs: 128 admincnt: 1
ixl2: using 8 rx queues 8 tx queues
ixl2: Using MSIX interrupts with 9 vectors
ixl2: Ethernet address: ac:1f:6b:79:8a:66
ixl2: Allocating 8 queues for PF LAN VSI; 8 queues active
ixl2: SR-IOV ready
ixl2: netmap queues/slots: TX 8/1024, RX 8/1024
ixl3: <Intel(R) Ethernet Connection X722 for 10GbE SFP+ - 2.1.0-k> mem
0xf7000000-0xf7ffffff,0xfb000000-0xfb007fff irq 46 at device 0.3 numa-domain 0
on pci14
ixl3: fw 3.1.57069 api 1.5 nvm 3.33 etid 80001006 oem 1.262.0
ixl3: PF-ID[3]: VFs 32, MSIX 129, VF MSIX 5, QPs 384, I2C
ixl3: using 1024 tx descriptors and 1024 rx descriptors
ixl3: msix_init qsets capped at 128
ixl3: pxm cpus: 8 queue msgs: 128 admincnt: 1
ixl3: using 8 rx queues 8 tx queues
ixl3: Using MSIX interrupts with 9 vectors
ixl3: Ethernet address: ac:1f:6b:79:8a:67
ixl3: Allocating 8 queues for PF LAN VSI; 8 queues active
ixl3: SR-IOV ready
ixl3: netmap queues/slots: TX 8/1024, RX 8/1024
pci9: <dasp, performance counters> at device 18.0 (no driver attached)
pci9: <dasp, performance counters> at device 18.1 (no driver attached)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <KXG50ZNV512G TOSHIBA> NVMe namespace
nvd0: 488386MB (1000215216 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus15 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <SanDisk SDSSDHII960G X31200RL> ACS-2 ATA SATA 3.x device
ada0: Serial Number 150607400550
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 915715MB (1875385008 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 26 ports with 26 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <Apple, Inc. Keyboard Hub> at usbus0
uhub1 numa-domain 0 on uhub0
uhub1: <Apple, Inc. Keyboard Hub, class 9/0, rev 2.00/96.15, addr 1> on usbus0
Root mount waiting for: usbus0
uhub1: 3 ports with 2 removable, bus powered
ugen0.3: <Apple, Inc Apple Keyboard> at usbus0
ukbd0 numa-domain 0 on uhub1
ukbd0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 2> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ixl0: Link is up, 1 Gbps Full Duplex, Requested FEC: None, Negotiated FEC:
None, Autoneg: True, Flow Control: None
ixl0: link state changed to UP
ugen0.4: <Primax Electronics Apple Optical USB Mouse> at usbus0
Root mount waiting for: usbus0
ugen0.5: <vendor 0x0557 product 0x7000> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 4> on
usbus0
uhub2: 4 ports with 3 removable, self powered
Root mount waiting for: usbus0
ugen0.6: <vendor 0x0557 product 0x2419> at usbus0
ukbd1 numa-domain 0 on uhub2
ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on
usbus0
kbd3 at ukbd1
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 2
Root mount waiting for: usbus0
ugen0.7: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 numa-domain 0 on uhub0
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 6> on usbus0
uhub3: MTT enabled
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
ugen0.8: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub4 numa-domain 0 on uhub3
uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 7> on usbus0
uhub4: MTT enabled
Root mount waiting for: usbus0
uhub4: 4 ports with 4 removable, self powered
lo0: link state changed to UP
igb0: link state changed to UP
ioat0: <SKX IOAT> mem 0x383ffff1c000-0x383ffff1ffff irq 26 at device 4.0
numa-domain 0 on pci0
ioat0: Capabilities:
f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat1: <SKX IOAT> mem 0x383ffff18000-0x383ffff1bfff irq 27 at device 4.1
numa-domain 0 on pci0
ioat1: Capabilities:
f0006f1<DMA_with_DIF,PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat2: <SKX IOAT> mem 0x383ffff14000-0x383ffff17fff irq 26 at device 4.2
numa-domain 0 on pci0
ioat2: Capabilities:
f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat3: <SKX IOAT> mem 0x383ffff10000-0x383ffff13fff irq 27 at device 4.3
numa-domain 0 on pci0
ioat3: Capabilities:
f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat4: <SKX IOAT> mem 0x383ffff0c000-0x383ffff0ffff irq 26 at device 4.4
numa-domain 0 on pci0
ioat4: Capabilities:
f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat5: <SKX IOAT> mem 0x383ffff08000-0x383ffff0bfff irq 27 at device 4.5
numa-domain 0 on pci0
ioat5: Capabilities:
f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat6: <SKX IOAT> mem 0x383ffff04000-0x383ffff07fff irq 26 at device 4.6
numa-domain 0 on pci0
ioat6: Capabilities:
f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
ioat7: <SKX IOAT> mem 0x383ffff00000-0x383ffff03fff irq 27 at device 4.7
numa-domain 0 on pci0
ioat7: Capabilities:
f0004f1<DMA_with_DIF,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Page_Break>
uhid0 numa-domain 0 on uhub1
uhid0: <Apple, Inc Apple Keyboard, class 0/0, rev 2.00/0.69, addr 2> on usbus0
ums0 numa-domain 0 on uhub1
ums0: <Primax Electronics Apple Optical USB Mouse, class 0/0, rev 1.10/1.10,
addr 3> on usbus0
ums0: 4 buttons and [XYZW] coordinates ID=0
ums1 numa-domain 0 on uhub2
ums1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 5> on usbus0
ums1: 3 buttons and [Z] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
igb0: link state changed to DOWN
igb0: link state changed to UP
===================
FreeBSD 12.0 ifconfig -a
===================
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:79:81:a4
inet 192.168.128.230 netmask 0xffffff00 broadcast 192.168.128.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:79:81:a5
media: Ethernet autoselect
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
igb2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:79:81:a6
media: Ethernet autoselect
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
igb3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:79:81:a7
media: Ethernet autoselect
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ixl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:79:8a:64
inet 192.168.128.201 netmask 0xffffff00 broadcast 192.168.128.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ixl1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:79:8a:65
media: Ethernet autoselect
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ixl2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:79:8a:66
media: Ethernet autoselect
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
ixl3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether ac:1f:6b:79:8a:67
media: Ethernet autoselect
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
inet 127.0.0.1 netmask 0xff000000
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
