Hello,
I was trying OpenBSD on a Supermicro A2SDi-4C-HLN4F which uses an Intel
Atom CPU (Denverton). The board boots but most devices are not
detected because ACPI can't be enabled.
Does anyone know if this is likely to be supported at some point?
Full dmesg is below
OpenBSD 6.5 (RAMDISK_CD) #3: Sat Apr 13 14:55:38 MDT 2019
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17125621760 (16332MB)
avail mem = 16602619904 (15833MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7f0c3000 (35 entries)
bios0: vendor American Megatrends Inc. version "1.1b" date 12/17/2018
bios0: Supermicro Super Server
acpi0 at bios0: rev 2, can't enable ACPI
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2200.41 MHz, 06-5f-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 2MB 64b/line 16-way L2 cache
cpu0: cannot disable silicon debug
cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x1980 rev 0x11
pchb1 at pci0 dev 4 function 0 vendor "Intel", unknown product 0x19a1 rev 0x11
vendor "Intel", unknown product 0x19a2 (class system subclass root complex
event, rev 0x11) at pci0 dev 5 function 0 not configured
ppb0 at pci0 dev 6 function 0 vendor "Intel", unknown product 0x19a3 rev 0x11
pci1 at ppb0 bus 1
vendor "Intel", unknown product 0x19e2 (class processor subclass Co-processor,
rev 0x11) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 10 function 0 vendor "Intel", unknown product 0x19a5 rev 0x11
pci2 at ppb1 bus 2
ppb2 at pci0 dev 16 function 0 vendor "Intel", unknown product 0x19aa rev 0x11
pci3 at ppb2 bus 3
ppb3 at pci0 dev 17 function 0 vendor "Intel", unknown product 0x19ab rev 0x11
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03
pci5 at ppb4 bus 5
"ASPEED Technology AST2000" rev 0x30 at pci5 dev 0 function 0 not configured
vendor "Intel", unknown product 0x19ac (class system subclass miscellaneous,
rev 0x11) at pci0 dev 18 function 0 not configured
ahci0 at pci0 dev 19 function 0 vendor "Intel", unknown product 0x19b2 rev
0x11: unable to map interrupt
ahci1 at pci0 dev 20 function 0 vendor "Intel", unknown product 0x19c2 rev
0x11: unable to map interrupt
xhci0 at pci0 dev 21 function 0 vendor "Intel", unknown product 0x19d0 rev
0x11: couldn't map interrupt
ppb5 at pci0 dev 22 function 0 vendor "Intel", unknown product 0x19d1 rev 0x11
pci6 at ppb5 bus 6
vendor "Intel", unknown product 0x15e4 (class network subclass ethernet, rev
0x11) at pci6 dev 0 function 0 not configured
vendor "Intel", unknown product 0x15e4 (class network subclass ethernet, rev
0x11) at pci6 dev 0 function 1 not configured
ppb6 at pci0 dev 23 function 0 vendor "Intel", unknown product 0x19d2 rev 0x11
pci7 at ppb6 bus 7
vendor "Intel", unknown product 0x15e5 (class network subclass ethernet, rev
0x11) at pci7 dev 0 function 0 not configured
vendor "Intel", unknown product 0x15e5 (class network subclass ethernet, rev
0x11) at pci7 dev 0 function 1 not configured
vendor "Intel", unknown product 0x19d3 (class communications subclass
miscellaneous, rev 0x11) at pci0 dev 24 function 0 not configured
vendor "Intel", unknown product 0x19dc (class bridge subclass ISA, rev 0x11) at
pci0 dev 31 function 0 not configured
vendor "Intel", unknown product 0x19de (class memory subclass miscellaneous,
rev 0x11) at pci0 dev 31 function 2 not configured
vendor "Intel", unknown product 0x19df (class serial bus subclass SMBus, rev
0x11) at pci0 dev 31 function 4 not configured
vendor "Intel", unknown product 0x19e0 (class serial bus unknown subclass 0x80,
rev 0x11) at pci0 dev 31 function 5 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
efifb0 at mainbus0: 1920x1200, 32bpp
wsdisplay at efifb0 not configured
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.5 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
Regards,
Richard
