Dear all, Today I've got some headache after upgrading OpenBSD-current running on AWS. Usually I upgrade twice a month using ansible. Last time I upgraded it on Aug 13. Today I started upgrade to the snapshot built on Sep 2, the instance didn't boot.
The logs showed where it stuck: pciide0:0:0: not ready, st=0x0, err=0x00 wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying pciide0:0:0: not ready, st=0x0, err=0x00 wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying fd0 at fdc0 drive 0: density unknown For some reason, the boot volume was recognized also as wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK> wd0: 16-sector PIO, LBA48, 16384MB, 33554432 sectors wd0(pciide0:0:0): using PIO mode 0, DMA mode 2 and then as scsibus1 at xbf0: 2 targets sd0 at scsibus1 targ 0 lun 0: <Xen, phy hda 768, 0000> SCSI5 0/direct fixed sd0: 16384MB, 512 bytes/sector, 33554432 sectors As a quick fix I disabled pciide/wd, the instance booted and runs fine. The dmesgs from successful and unsuccessful boots are attached. May be this information can be helful for somebody. -- With best regards, Pavel Korovin
OpenBSD 6.6-beta (GENERIC) #0: Sun Aug 11 13:09:21 MSK 2019 real mem = 1056964608 (1008MB) avail mem = 1014919168 (967MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb01f (11 entries) bios0: vendor Xen version "4.2.amazon" date 08/24/2006 bios0: Xen HVM domU acpi0 at bios0: ACPI 4.0 acpi0: sleep states S3 S4 S5 acpi0: tables DSDT FACP APIC HPET WAET SSDT SSDT acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 48 pins, remapped cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU E5-2676 v3 @ 2.40GHz, 2394.81 MHz, 06-3f-02 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,RDTSCP,LONG,LAHF,ABM,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,XSAVEOPT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 100MHz acpihpet0 at acpi0: 62500000 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C1(@1 halt!) acpipci0 at acpi0 PCI0: _OSC failed acpicmos0 at acpi0 "ACPI0007" at acpi0 not configured cpu0: using Broadwell MDS workaround pvbus0 at mainbus0: Xen 4.2 xen0 at pvbus0: features 0x705, 32 grant table frames, event channel 3 xbf0 at xen0 backend 0 channel 5: disk scsibus1 at xbf0: 2 targets sd0 at scsibus1 targ 0 lun 0: <Xen, phy hda 768, 0000> SCSI3 0/direct fixed sd0: 16384MB, 512 bytes/sector, 33554432 sectors xnf0 at xen0 backend 0 channel 6: address 0a:e4:5b:de:3e:56 "console" at xen0: device/console/0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 disabled (no drives) piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x01: SMBus disabled vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) xspd0 at pci0 dev 3 function 0 "XenSource Platform Device" rev 0x01 isa0 at pcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets root on sd0a (9fe353d6b8fcec8d.a) swap on sd0b dump on sd0b fd0 at fdc0 drive 0: density unknown fd1 at fdc0 drive 1: density unknown
OpenBSD 6.6-beta (GENERIC) #0: Mon Sep 2 18:40:03 MSK 2019 real mem = 1056964608 (1008MB) avail mem = 1012391936 (965MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb01f (11 entries) bios0: vendor Xen version "4.2.amazon" date 08/24/2006 bios0: Xen HVM domU acpi0 at bios0: ACPI 4.0 acpi0: sleep states S3 S4 S5 acpi0: tables DSDT FACP APIC HPET WAET SSDT SSDT acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 48 pins, remapped cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Xeon(R) CPU E5-2676 v3 @ 2.40GHz, 2400.36 MHz, 06-3f-02 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,FMA3,CX16,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,RDTSCP,LONG,LAHF,ABM,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,XSAVEOPT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 100MHz acpihpet0 at acpi0: 62500000 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C1(@1 halt!) acpipci0 at acpi0 PCI0 acpicmos0 at acpi0 "ACPI0007" at acpi0 not configured pci0 at acpipci0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK> wd0: 16-sector PIO, LBA48, 16384MB, 33554432 sectors wd0(pciide0:0:0): using PIO mode 0, DMA mode 2 pciide0: channel 1 disabled (no drives) piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x01: SMBus disabled vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) xspd0 at pci0 dev 3 function 0 "XenSource Platform Device" rev 0x01 isa0 at pcib0 isadma0 at isa0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 cpu0: using Broadwell MDS workaround pvbus0 at mainbus0: Xen 4.2 xen0 at pvbus0: features 0x705, 32 grant table frames, event channel 3 xbf0 at xen0 backend 0 channel 5: disk scsibus1 at xbf0: 2 targets sd0 at scsibus1 targ 0 lun 0: <Xen, phy hda 768, 0000> SCSI5 0/direct fixed sd0: 16384MB, 512 bytes/sector, 33554432 sectors xnf0 at xen0 backend 0 channel 6: address 0a:e4:5b:de:3e:56 "console" at xen0: device/console/0 not configured vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets pciide0:0:0: not ready, st=0x0, err=0x00 wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying pciide0:0:0: not ready, st=0x0, err=0x00 wd0c: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying fd0 at fdc0 drive 0: density unknown
