Hi, All: I am new to OpenBSD; I recently installed 6.5 on a Dell Inspiron 6000 and upgraded to 6.6 yesterday. Suspend did not work in 6.5 and still doesn't in 6.6.
What is the best way for me to go about debugging this issue? So far, I have checked: - dmesg for ACPI wake devices - syslog for suspend messages Specifically, the suspend works; however, when I attempt to wake the device, the laptop seems to respond and attempt to wake, but the display never turns on, and I cannot SSH into the machine. Below are the dmesg and relevant syslog entries. dmesg ===== OpenBSD 6.6 (GENERIC) #0: Sat Oct 26 05:57:51 MDT 2019 r...@syspatch-66-i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC real mem = 527790080 (503MB) avail mem = 502480896 (479MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 09/28/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf80e0 (44 entries) bios0: vendor Dell Inc. version "A09" date 09/28/2005 bios0: Dell Inc. Inspiron 6000 acpi0 at bios0: ACPI 1.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC MCFG BOOT SSDT SSDT acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) USB0(S0) USB1(S0) USB2(S0) USB4(S0) USB3(S0) MODM(S3) PCIE(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Celeron(R) M processor 1.30GHz ("GenuineIntel" 686-class) 1.30 GHz, 06-0d-06 cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,PERF,MELTDOWN mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins, remapped acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-255 acpimcfg0: addr 0x0, bus 0-0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (AGP_) acpiprt2 at acpi0: bus 3 (PCIE) acpicpu0 at acpi0: !C3(250@85 io@0x1015), !C2(500@1 io@0x1014), C1(1000@1 halt) acpitz0 at acpi0: critical temperature is 99 degC acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model "DELL F51336" serial 1988 type LION oem "Sanyo" acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN "PNP0A03" at acpi0 not configured acpicmos0 at acpi0 acpivideo0 at acpi0: VID_ acpivideo1 at acpi0: VID_ acpivideo2 at acpi0: VID2 bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03 inteldrm0 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03 drm0 at inteldrm0 intagp0 at inteldrm0 agp0 at intagp0: aperture at 0xc0000000, size 0x10000000 inteldrm0: apic 1 int 16 "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 16 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3 pci1 at ppb0 bus 3 bce0 at pci1 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 18, address 00:11:43:70:7f:12 bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0 cbb0 at pci1 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xb3: apic 1 int 19 "Ricoh 5C552 Firewire" rev 0x08 at pci1 dev 1 function 1 not configured sdhc0 at pci1 dev 1 function 2 "Ricoh 5C822 SD/MMC" rev 0x17: apic 1 int 17 sdhc0: SDHC 1.0, 33 MHz base clock sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed bwi0 at pci1 dev 3 function 0 "Broadcom BCM4306" rev 0x03: apic 1 int 17, address 00:0b:7d:15:3a:24 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 4 device 0 cacheline 0x0, lattimer 0x20 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int 16, ICH6 ac97: codec id 0x83847652 (SigmaTel STAC9752/53) ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D audio0 at auich0 "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK3021GAS> wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <SAMSUNG, CDRW/DVD SN-324S, U303> removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pms0: ALPS Glidepoint, version 0x7321 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 umass0 at uhub0 port 7 configuration 1 interface 0 "SanDisk Ultra Fit" rev 2.10/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd0 at scsibus2 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable serial.07815583160829112091 sd0: 14664MB, 512 bytes/sector, 30031872 sectors vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on wd0a (cc890b5cad21430f.a) swap on wd0b dump on wd0b inteldrm0: 1280x800, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) ugen0 at uhub0 port 5 "TCT Holding Ltd. TCT Modem" rev 2.00/0.00 addr 3 ugen0: setting configuration index 0 failed ugen0 detached messages ======== Oct 16 11:13:23 bilbo apmd: system suspending Oct 16 11:13:23 bilbo apmd: battery status: high. external power status: connected. estimated battery life 100% Oct 16 11:13:24 bilbo /bsd: uhub1 detached Oct 16 11:13:24 bilbo /bsd: uhub2 detached Oct 16 11:13:24 bilbo /bsd: uhub3 detached Oct 16 11:20:42 bilbo syslogd[3039]: start