Nick Holland <[EMAIL PROTECTED]> writes:
> Marcus Barczak wrote:
> ...
>> -- dmesg output --
>> ahc0 at pci0 dev 9 function 0 "Adaptec AHA-2940U" rev 0x00: irq 11
>> scsibus2 at ahc0: 16 targets
>> st0 at scsibus2 targ 4 lun 0: <HP, C1537A, L706> SCSI2 1/sequential removable
>> st0: density code 0x8c, variable blocks, write-enabled
>> Has anyone seen this problem before or have any suggestions as to
>> how I may fix it?
>
> wow, never seen a dmesg like that before. No wonder it doesn't work,
> most of your computer is missing!
Since I am a perpetrator of the same crime, I'll provide my full DMESG:
OpenBSD 3.9-beta (GENERIC) #604: Sun Feb 19 11:44:44 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 1072209920 (1047080K)
avail mem = 971649024 (948876K)
using 4278 buffers containing 53714944 bytes (52456K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(61) BIOS, date 09/08/04, BIOS32 rev. 0 @ 0xfba70
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xde34
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdd50/224 (12 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xe800 0xd0000/0x1000 0xd1000/0x8600
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82875P Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82875P AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0309 rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 3 function 0 "Intel 82875P PCI-CSA" rev 0x02
pci2 at ppb1 bus 2
em0 at pci2 dev 1 function 0 "Intel PRO/1000CT (82547EI)" rev 0x00: irq 11,
address 00:09:6b:a7:3f:d7
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci3 at ppb2 bus 3
ahd0 at pci3 dev 5 function 0 "Adaptec AIC-7901A U320" rev 0x03: irq 11
ahd0: aic7901A, U320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
scsibus0 at ahd0: 16 targets
ahd0: target 0 using asynchronous transfers
sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST336607LW FN, B25H> SCSI3 0/direct
fixed
sd0: 34715MB, 49855 cyl, 2 head, 713 sec, 512 bytes/sec, 71096640 sec total
sd1 at scsibus0 targ 1 lun 0: <IBM-ESXS, DTN036W3UWDY10FN, S29C> SCSI3 0/direct
fixed
sd1: 34715MB, 36703 cyl, 3 head, 645 sec, 512 bytes/sec, 71096640 sec total
ath0 at pci3 dev 7 function 0 "Atheros AR5212" rev 0x01: irq 10
ath0: AR5213 7.9 phy 4.5 rf2112a 5.6: RF radio not supported
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci3 dev 8 function 0 not
configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITE-ON, LTR-48327S, PUS4> SCSI0 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus2 at atapiscsi1: 2 targets
cd1 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4082B, A208> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4
pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: irq 11
iic0 at ichiic0
iic0: addr 0x1a 00=0f 02=f0 03=00
adt0 at iic0 addr 0x2e: adt7460 (ADT7460) rev 62
auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: irq 11, ICH5
AC97
ac97: codec id 0x414c4740 (Avance Logic ALC202)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb65 netmask ff65 ttymask ffe7
pctr: user-level cycle counter enabled
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: Maxtor OneTouch II, rev 2.00/2.03, addr 2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets
sd2 at scsibus3 targ 1 lun 0: <Maxtor, OneTouch II, 023g> SCSI4 0/direct fixed
sd2: 194481MB, 194481 cyl, 64 head, 32 sec, 512 bytes/sec, 398297088 sec total
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Topre Corporation HHKB Professional, rev 1.10/1.02, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 0
uhidev1: Kensington Kensington Expert Mouse, rev 1.10/1.00, addr 3, iclass 3/1
ums0 at uhidev1: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
ahd0: target 0 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU)
dkcsum: sd0 matches BIOS drive 0x80
ahd0: target 1 synchronous with period = 0x8, offset = 0x7f(RDSTRM|DT|IU)
dkcsum: sd1 matches BIOS drive 0x81
dkcsum: sd2 matches BIOS drive 0x82
root on sd1a
rootdev=0x410 rrootdev=0xd10 rawdev=0xd12
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
--
Aaron Hsu <[EMAIL PROTECTED]> Jabber: [EMAIL PROTECTED]
<http://www.sacrificumdeo.net> "Extend beyond the Mortal . . . ."
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety." - Benjamin Franklin
