Greetings,
I've just updated my system to the latest available snapshot:
OpenBSD theseus.atlantide.priv 6.7 GENERIC.MP#137 amd64
As soon as I launch tmux, my CPU jumps to a 100% utilization.
The relevant lines from top:
[...]
load averages: 0.92, 0.27, 0.14 theseus.atlantide.priv
15:44:50
146 processes: 1 running, 142 idle, 1 dead, 2 on processor up 0:46
CPU0: 42.9% user, 0.0% nice, 51.3% sys, 5.8% spin, 0.0% intr, 0.0% idle
CPU1: 46.7% user, 0.0% nice, 47.5% sys, 5.8% spin, 0.0% intr, 0.0% idle
Memory: Real: 367M/1637M act/tot Free: 5978M Cache: 714M Swap: 0K/8114M
PID USERNAME PRI NICE SIZE RES STATE WAIT TIME CPU COMMAND
43835 just22 64 0 2164K 3176K run/0 - 0:32 79.49% tmux
18000 just22 63 0 5752K 14M onproc/0 - 3:08 78.86% xterm
[...]
Please find dmesg at the end of the message. Any hints? It's just me?
All the best
OpenBSD 6.7-beta (GENERIC.MP) #137: Fri Apr 17 22:39:21 MDT 2020
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8239386624 (7857MB)
avail mem = 7977066496 (7607MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9c000 (68 entries)
bios0: vendor LENOVO version "G1ETB8WW (2.78 )" date 09/19/2018
bios0: LENOVO 2349KT5
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC TCPA SSDT SSDT SSDT HPET APIC MCFG ECDT FPDT ASF!
UEFI UEFI POAT SSDT SSDT DMAR UEFI DBG2
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP3(S4) XHCI(S3) EHC1(S3)
EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.51 MHz, 06-3a-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.12 MHz, 06-3a-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 4 (EXP3)
acpicpu0 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(350@80 mwait.1@0x20), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1, EHC2
acpitz0 at acpi0: critical temperature is 200 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibat0 at acpi0: BAT0 model "45N1001" serial 2729 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
"LEN0078" at acpi0 not configured
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300, 2200,
2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, IVYBRIDGE, gen 7
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
00:21:cc:d7:43:44
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 2
sdhc0 at pci1 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Ultimate-N 6300" rev 0x3e: msi,
MIMO 3T3R, MoW, address 24:77:03:d8:9c:74
ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, R010> naa.50026b77823f81ef
sd0: 228936MB, 512 bytes/sector, 468862128 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GT50N, LT20> removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xb40000 0x0 0xd047b1 0xa0000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB Receiver" rev
2.00/12.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB Receiver" rev
2.00/12.01 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB Receiver" rev
2.00/12.01 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
umodem0 at uhub0 port 4 configuration 1 interface 1 "Lenovo H5321 gw" rev
2.00/0.00 addr 3
umodem0: data interface 2, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
umodem1 at uhub0 port 4 configuration 1 interface 3 "Lenovo H5321 gw" rev
2.00/0.00 addr 3
umodem1: data interface 4, has CM over data, has break
umodem1: status change notification available
ucom1 at umodem1
umodem2 at uhub0 port 4 configuration 1 interface 9 "Lenovo H5321 gw" rev
2.00/0.00 addr 3
umodem2: data interface 10, has CM over data, has break
umodem2: status change notification available
ucom2 at umodem2
ugen0 at uhub0 port 4 configuration 1 "Lenovo H5321 gw" rev 2.00/0.00 addr 3
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
ugen1 at uhub3 port 1 "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 3
uhub4 at uhub3 port 2 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/9.01 addr 4
uhub5 at uhub4 port 1 configuration 1 interface 0 "Genesys Logic USB2.0 Hub"
rev 2.00/9.01 addr 5
uhidev3 at uhub4 port 3 configuration 1 interface 0 "CHICONY HP Basic USB
Keyboard" rev 1.10/3.00 addr 6
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev4 at uhub4 port 4 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/27.20 addr 7
uhidev4: iclass 3/1
ums1 at uhidev4: 8 buttons, Z and W dir
wsmouse3 at ums1 mux 0
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd.
Integrated Camera" rev 2.00/5.64 addr 8
video0 at uvideo0
uhub6 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (7a2ec63fbc88653a.a) swap on sd0b dump on sd0b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
--
Alessandro De Laurenzis
[mailto:jus...@atlantide.mooo.com]
Web: http://www.atlantide.mooo.com
LinkedIn: http://it.linkedin.com/in/delaurenzis
