On Fri, Jun 05, 2020 at 10:52:38AM +0200, Marek Benc wrote:
> There's been some changes in the OpenBSD port of smartmontools,
> tools for working with S.M.A.R.T diagnostic of hard drives and SSDs,
> the platform-specific code was modernized, so it would be quite useful
> if people could test these changes out to make sure they work on all
> systems, I tested them on a macppc system with an ATA drive.
>
> The developer doesn't currently have access to a physical system
> with OpenBSD running on it, so they wrote the changes in a virtual
> machine.
>
> You can find the changes here:
> https://github.com/smartmontools/smartmontools/pull/56
>
Seems to work fine here:
calvin$ uname -a
OpenBSD calvin.int.osk.am 6.7 GENERIC.MP#2 amd64
calvin$ sysctl hw | egrep '(model|vendor|product|version)'
hw.model=Intel(R) Pentium(R) CPU G3450 @ 3.40GHz
hw.vendor=Shuttle Inc.
hw.product=DS81L
hw.version=V1.0
calvin$ doas ./smartctl -a -d ata /dev/rsd0c
smartctl 7.2 (build date Jun 6 2020) [OpenBSD 6.7 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 840 EVO 120GB
Serial Number: S1D5NSBDB26732X
LU WWN Device Id: 5 002538 8a00f2d01
Firmware Version: EXT0DB6Q
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jun 6 10:41:51 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4200) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 70) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always
- 64013
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always
- 545
177 Wear_Leveling_Count 0x0013 098 098 000 Pre-fail Always
- 24
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always
- 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always
- 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always
- 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always
- 0
187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0032 067 053 000 Old_age Always
- 33
195 ECC_Error_Rate 0x001a 200 200 000 Old_age Always
- 0
199 CRC_Error_Count 0x003e 099 099 000 Old_age Always
- 4
235 POR_Recovery_Count 0x0012 099 099 000 Old_age Always
- 47
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always
- 13444727948
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
