On 12.8.2020. 15:18, Winfred Harrelson wrote: > On Tue, Aug 11, 2020 at 07:52:10PM +0100, Tom Smyth wrote: >> Hi Winfred, >> the intel 710 is a complex card, I would suggest that you try updating the >> firmware on the card, available from intel.com or your card vendor, >> you may have to boot to a live linux cd to apply the firmware update, >> >> but I had some issues with the Intel XL710 cards and I had to update the >> firmware to get it working stable, >> >> I hope this helps >> Tom Smyth > > Adding misc@openbsd.org back to the CC for the record. > > Thanks for the quick reply. I didn't reply back yesterday because I > was having trouble getting the firmware updated from a Linux boot disk. > I ended up having to try from a Windows boot disk. Unfortunately, I > am getting the same thing again: > > > wharrels@styx2:/home/wharrels# dmesg | grep ^ixl > ixl0 at pci5 dev 0 function 0 "Intel XXV710 SFP28" rev 0x02: port 0, FW > 8.0.61820 API 1.11, msix, 8 queues, address 3c:fd:fe:ed:b7:28 > ixl1 at pci5 dev 0 function 1 "Intel XXV710 SFP28" rev 0x02: port 1, FW > 8.0.61820 API 1.11, msix, 8 queues, address 3c:fd:fe:ed:b7:29 > ixl2 at pci8 dev 0 function 0 "Intel XXV710 SFP28" rev 0x02: port 0, FW > 8.0.61820 API 1.11, msix, 8 queues, address 3c:fd:fe:eb:19:b0 > ixl3 at pci8 dev 0 function 1 "Intel XXV710 SFP28" rev 0x02: port 1, FW > 8.0.61820 API 1.11, msix, 8 queues, address 3c:fd:fe:eb:19:b1 > ixl4 at pci12 dev 0 function 0 "Intel X722 10GBASE-T" rev 0x09: port 0, FW > 3.1.57069 API 1.5, msix, 8 queues, address 3c:ec:ef:1a:df:f2 > ixl5 at pci12 dev 0 function 1 "Intel X722 10GBASE-T" rev 0x09: port 1, FW > 3.1.57069 API 1.5, msix, 8 queues, address 3c:ec:ef:1a:df:f3 > > Yup, all the XXV710 cards have been updated to newest firmware. > > Now for the (failed) attempt: > > wharrels@styx2:/etc# ifconfig ixl0 > ixl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 3c:fd:fe:ed:b7:28 > index 1 priority 0 llprio 3 > media: Ethernet autoselect (25GbaseSR full-duplex) > status: active > wharrels@styx2:/etc# ifconfig ixl2 > ixl2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 3c:fd:fe:eb:19:b0 > index 3 priority 0 llprio 3 > media: Ethernet autoselect (25GbaseSR full-duplex) > status: active > wharrels@styx2:/etc# ifconfig aggr1 create > wharrels@styx2:/etc# ifconfig aggr1 trunkport ixl0 > wharrels@styx2:/etc# ifconfig aggr1 trunkport ixl2 > wharrels@styx2:/etc# ifconfig aggr1 up > wharrels@styx2:/etc# ifconfig aggr1 > aggr1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr fe:e1:ba:d0:7c:e9 > index 11 priority 0 llprio 7 > trunk: trunkproto lacp > trunk id: [(8000,fe:e1:ba:d0:7c:e9,000B,0000,0000), > (0000,00:00:00:00:00:00,0000,0000,0000)] > ixl0 lacp actor system pri 0x8000 mac fe:e1:ba:d0:7c:e9, key > 0xb, port pri 0x8000 number 0x1 > ixl0 lacp actor state activity,aggregation,defaulted > ixl0 lacp partner system pri 0x0 mac 00:00:00:00:00:00, key > 0x0, port pri 0x0 number 0x0 > ixl0 lacp partner state activity,aggregation,sync > ixl0 port > ixl2 lacp actor system pri 0x8000 mac fe:e1:ba:d0:7c:e9, key > 0xb, port pri 0x8000 number 0x3 > ixl2 lacp actor state activity,aggregation,defaulted > ixl2 lacp partner system pri 0x0 mac 00:00:00:00:00:00, key > 0x0, port pri 0x0 number 0x0 > ixl2 lacp partner state activity,aggregation,sync > ixl2 port > groups: aggr > media: Ethernet autoselect > status: no carrier > > > > I tried doing another sysupgrade this morning just in case something > had changed overnight but no luck. Any other ideas? > > Winfred >
Hi, could you try install snapshot from http://ftp.hostserver.de/archive/ that is older than Thu Jun 25 06:41:38 2020 UTC ... maybe this commit broke xxv710 http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/dev/pci/if_ixl.c?rev=1.56&content-type=text/x-cvsweb-markup i have vlans over aggr over x710-da2 with latest snapshot and it's working as expected .. ixl0 at pci1 dev 0 function 0 "Intel X710 SFP+" rev 0x02: port 0, FW 7.3.60988 API 1.10, msix, 8 queues ixl1 at pci1 dev 0 function 1 "Intel X710 SFP+" rev 0x02: port 1, FW 7.3.60988 API 1.10, msix, 8 queues could you send output from these two commands .. ifconfig ixl sff ifconfig ixl media