Le vendredi 03 avril 2020 à 17:41 +0200, Bastien Durel a écrit :
> Hello,
>
> As bird makes 6.6 panic, I tested it on 6.6-current. The kernel does
> not panic, but after bird runs, networking deos not work anymore.
>
> Bird seems to work correctly, it inserts routes in the kernel as
> intended :
>
> (before bird)
> Routing tables
>
> Internet:
> Destination Gateway Flags Refs Use Mtu
> Prio Iface
> default 10.42.42.1 UG1 0 0 -
> 56 em0
> 224/4 127.0.0.1 URS 0 17 32768
> 8 lo0
> 10.42.2/24 10.42.42.21 UG1 0 0 -
> 56 em0
> 10.42.42/24 10.42.42.69 U1h 1 51 -
> 56 em0
> 10.42.42.3 10.42.42.69 UGHD 1 51 - L
> 56 em0
> 10.42.42.69 08:00:27:d6:6e:dd UHLhl 1 26 -
> 1 em0
> 10.42.42.255 10.42.42.69 UHb 0 10 -
> 1 em0
> 127/8 127.0.0.1 UGRS 0 0 32768
> 8 lo0
> 127.0.0.1 127.0.0.1 UHhl 1 2 32768
> 1 lo0
>
> (with bird)
> Routing tables
>
> Internet:
> Destination Gateway Flags Refs Use Mtu
> Prio Iface
> default 10.42.42.1 UGS 5 12 -
> 8 em0
> default 10.42.42.1 UG1 0 0 -
> 56 em0
> 224/4 127.0.0.1 URS 0 15 32768
> 8 lo0
> 10.0.42.21 10.42.42.21 UGH1 0 0 -
> 56 em0
> 10.42.0/24 10.42.42.1 UG1 0 0 -
> 56 em0
> 10.42.1.56/30 10.42.42.21 UG1 0 0 -
> 56 em0
> 10.42.1.64/30 10.42.42.21 UG1 0 0 -
> 56 em0
> 10.42.1.76/30 10.42.42.21 UG1 0 0 -
> 56 em0
> 10.42.2/24 10.42.42.21 UGS 0 4 -
> 8 em0
> 10.42.2/24 10.42.42.21 UG1 0 0 -
> 56 em0
> 10.42.2.254 10.42.42.21 UGH1 0 0 -
> 56 em0
> 10.42.7.6 10.42.42.21 UGH1 0 0 -
> 56 em0
> 10.42.7.7 10.42.42.21 UGH1 0 0 -
> 56 em0
> [...]
>
> Bird config is simple (stripped comments):
> router id 10.42.42.69;
> protocol device {
> }
> protocol direct {
> disabled; # Disable by default
> ipv4; # Connect to default IPv4 table
> ipv6; # ... and to default IPv6 table
> }
> protocol kernel {
> ipv4 { # Connect protocol to IPv4 table by
> channel
> import none; # Import to table, default is import
> all
> export all; # Export to protocol. default is
> export none
> };
> }
> protocol ospf v2 ospfv2 {
> rfc1583compat yes;
> tick 2;
> ipv4 {};
> area 0 {
> interface "em0" { cost 10; };
> };
> }
>
> But although bird adjacencies are ok, the box cannot communicate with
> others, via TCP (ssh) or ping, even on the same link :
>
> BIRD 2.0.6 ready.
> ospfv2:
> Router ID Pri State DTime Interface Router IP
> 10.42.42.21 1 ExStart/DR 39.261 em0
> 10.42.42.21
> 10.42.42.1 1 ExStart/BDR 38.635 em0 10.42.42.1
> BIRD 2.0.6 ready.
> ospfv3:
> Router ID Pri State DTime Interface Router IP
> 10.42.42.21 1 Full/DR 35.854 em0
> fe80::225:22ff:fe1e:bb7
> 10.42.42.1 1 Full/BDR 36.525 em0
> fe80::4262:31ff:fe01:4b66
>
> PING fe80::225:22ff:fe1e:bb7 (fe80::225:22ff:fe1e:bb7): 56 data bytes
> ping6: sendmsg: Network is unreachable
> ping: wrote fe80::225:22ff:fe1e:bb7 64 chars, ret=-1
> ping6: sendmsg: Network is unreachableping: wrote
> fe80::225:22ff:fe1e:bb7 64 chars, ret=-1
> ping6: sendmsg: Network is unreachableping: wrote
> fe80::225:22ff:fe1e:bb7 64 chars, ret=-1
> ping6: sendmsg: Network is unreachableping: wrote
> fe80::225:22ff:fe1e:bb7 64 chars, ret=-1
>
> --- fe80::225:22ff:fe1e:bb7 ping statistics ---
> 4 packets transmitted, 0 packets received, 100.0% packet loss
>
>
> PING 10.42.42.1 (10.42.42.1): 56 data bytes
> ping: sendmsg: Invalid argument
> ping: wrote 10.42.42.1 64 chars, ret=-1
> ping: sendmsg: Invalid argument
> ping: wrote 10.42.42.1 64 chars, ret=-1
> ping: sendmsg: Invalid argument
> ping: wrote 10.42.42.1 64 chars, ret=-1
> ping: sendmsg: Invalid argument
> ping: wrote 10.42.42.1 64 chars, ret=-1
>
> --- 10.42.42.1 ping statistics ---
> 4 packets transmitted, 0 packets received, 100.0% packet loss
>
> Stopping bird does not let network recover, nor does flushing routes
> (route -n flush) or restarting interface with netstart em0
>
> I've done theses tests on various VMs, as I didn't want to upgrade my
> real router to snapshot (the bug is reproductible on virtual box &
> qemu-kvm, with intel pro/1000 or virtio interfaces)
Hello,
The 6.8-current is also affected by this bug; a few seconds after bird
is started, network stops beeing usable.
Event after shutting bird down, flushing routes, and restarting
interface (with DHCP assigning an address correctly), every connection
fails with "invalid argument" error
OpenBSD 6.8-current (GENERIC) #117: Sun Oct 18 09:18:45 MDT 2020
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2130640896 (2031MB)
avail mem = 2051129344 (1956MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz, 3099.58 MHz, 06-3c-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,PCID,SSE4.1,
SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,RDRAND,NXE,RDTSCP,LONG,LAHF,ABM,ITSC,
FSGSBASE,AVX2,INVPCID,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 999MHz
cpu0: mwait min=64, max=64
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins,
remapped
acpiprt0 at acpi0: bus 0 (PCI0)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpiac0 at acpi0: AC unit online
acpicpu0 at acpi0: C1(@1 halt!)
acpivideo0 at acpi0: GFX0
cpu0: using Broadwell MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 16384MB, 33554432 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <VBOX, CD-ROM, 1.0> removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev
0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 1 int 19,
address 08:00:27:d6:6e:dd
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0
not configured
auich0 at pci0 dev 5 function 0 "Intel 82801AA AC97" rev 0x01: apic 1
int 21, ICH
ac97: codec id 0x83847600 (SigmaTel STAC9700)
audio0 at auich0
ohci0 at pci0 dev 6 function 0 "Apple Intrepid USB" rev 0x00: apic 1
int 22, version 1.0
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 1
int 23
iic0 at piixpm0
ehci0 at pci0 dev 11 function 0 "Intel 82801FB USB" rev 0x00: apic 1
int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev
1.00/1.00 addr 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (93ce6f2269537131.a) swap on wd0b dump on wd0b
arp_rtrequest: bad gateway value: em0
nd6_rtrequest: bad gateway value: em0
nd6_rtrequest: bad gateway value: em0
nd6_rtrequest: bad gateway value: em0
arpresolve: 10.42.42.0: route contains no arp information
arpresolve: 10.42.42.0: route contains no arp information
arpresolve: 10.42.42.1: route contains no arp information
arpresolve: 10.42.42.0: route contains no arp information
arpresolve: 10.42.42.1: route contains no arp information
arpresolve: 10.42.42.1: route contains no arp information
arpresolve: 10.42.42.1: route contains no arp information
arpresolve: 10.42.42.0: route contains no arp information
arpresolve: 10.42.42.0: route contains no arp information
arpresolve: 10.42.42.0: route contains no arp information
[...]
