I have a similar situation with a Logitech G series keyboard. From
reading man pages for usb, usbhid, wscons, ect. I'm able to get the
keyboard input using usbhidctl(8) and if I leave this program running I
I'm able to use my external keyboard.
Does anyone know how to have the keyboard automatically work?
bash-5.0 # usbhidctl -f /dev/uhid5 -v -r
Report descriptor:
Collection page=Consumer usage=Consumer_Control
Input size=1 count=1 page=Consumer usage=Scan_Next_Track, logical range 0..1
Input size=1 count=1 page=Consumer usage=Scan_Previous_Track, logical range
0..1
Input size=1 count=1 page=Consumer usage=Stop, logical range 0..1
Input size=1 count=1 page=Consumer usage=Play/Pause, logical range 0..1
Input size=1 count=1 page=Consumer usage=Mute, logical range 0..1
Input size=1 count=1 page=Consumer usage=Volume_Increment, logical range 0..1
Input size=1 count=1 page=Consumer usage=Volume_Decrement, logical range 0..1
Input size=1 count=1 Const page=0x0000 usage=0x0000, logical range 0..1
End collection
Total input size 1 bytes
Total output size 0 bytes
Total feature size 0 bytes
bash-5.0 # usbhidctl -f /dev/uhid5 -a -v
usbhidctl: USB_GET_REPORT (probably not supported by device): Input/output error
bash-5.0 # usbhidctl -f /dev/uhid5 -l
Consumer_Control.Scan_Next_Track=0
Consumer_Control.Scan_Previous_Track=0
Consumer_Control.Stop=0
Consumer_Control.Play/Pause=0
Consumer_Control.Mute=0
Consumer_Control.Volume_Increment=0
Consumer_Control.Volume_Decrement=0
Hello world, from USB external keyboard!
bash-5.0 # #keyboard now works in a new terminal
Here's my relevant dmesg output:
uhub9 at uhub8 port 2 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev
2.00/22.16 addr 3
uhub9: device problem, disabling port 2
uhidev0 at uhub9 port 1 configuration 1 interface 0 "Logitech Gaming Mouse
G402" rev 2.00/90.02 addr 4
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z and W dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub9 port 1 configuration 1 interface 1 "Logitech Gaming Mouse
G402" rev 2.00/90.02 addr 4
uhidev1: iclass 3/0, 17 report ids
ukbd0 at uhidev1 reportid 1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
On Sun, Jun 21, 2020 at 03:34:44PM -0700, openbsdtai123 wrote:
Dear Theo,
Hello,
I would like that my keyboard G213 works, but unfortunately, it doesnt.
Please find my dmesg.
I am looking forward to reading you.
Best regards
Openbsd user
OpenBSD 6.7 (GENERIC.MP) #602: Thu May 7 13:45:48 MDT 2020
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP
real mem = 958754816 (914MB)
avail mem = 899207168 (857MB)
mainbus0 at root: Raspberry Pi 3 Model B Rev 1.2
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20200100
apm0 at mainbus0
simplefb0 at mainbus0: 1824x984, 32bpp
wsdisplay0 at simplefb0 mux 1
wsdisplay0: screen 0-5 added (std, vt100 emulation)
"system" at mainbus0 not configured
"axi" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
bcmdmac0 at simplebus0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
bcmclock0 at simplebus0
bcmmbox0 at simplebus0
bcmgpio0 at simplebus0
bcmaux0 at simplebus0
bcmintc0 at simplebus0
bcmdog0 at simplebus0
bcmrng0 at simplebus0
pluart0 at simplebus0: console
bcmsdhost0 at simplebus0: 250 MHz base clock
sdmmc0 at bcmsdhost0: 4-bit, sd high-speed, mmc high-speed, dma
"dsi" at simplebus0 not configured
dwctwo0 at simplebus0
bcmtemp0 at simplebus0
"local_intc" at simplebus0 not configured
sdhc0 at simplebus0
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc0: 4-bit, sd high-speed, mmc high-speed
simplebus1 at simplebus0: "firmware"
"expgpio" at simplebus1 not configured
"power" at simplebus0 not configured
"mailbox" at simplebus0 not configured
"gpiomem" at simplebus0 not configured
"fb" at simplebus0 not configured
"vcsm" at simplebus0 not configured
"virtgpio" at simplebus0 not configured
simplebus2 at mainbus0: "clocks"
"clock" at simplebus2 not configured
"clock" at simplebus2 not configured
"phy" at mainbus0 not configured
"arm-pmu" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 19200 KHz
"leds" at mainbus0 not configured
"fixedregulator_3v3" at mainbus0 not configured
"fixedregulator_5v0" at mainbus0 not configured
cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4
cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu1: 512KB 64b/line 16-way L2 cache
cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4
cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu2: 512KB 64b/line 16-way L2 cache
cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4
cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu3: 512KB 64b/line 16-way L2 cache
usb0 at dwctwo0: USB revision 2.0
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, ST064, 0013> removable
sd0: 59MB, 512 bytes/sector, 122624 sectors
uhub0 at usb0 configuration 1 interface 0 "Broadcom DWC2 root hub" rev
2.00/1.00 addr 1
uhub1 at uhub0 port 1 configuration 1 interface 0 "Standard Microsystems product
0x9514" rev 2.00/2.00 addr 2
bwfm0 at sdmmc1 function 1
manufacturer 0x02d0, product 0xa9a6 at sdmmc1 function 2 not configured
smsc0 at uhub1 port 1 configuration 1 interface 0 "Standard Microsystems
SMSC9512/14" rev 2.00/2.00 addr 3
smsc0: address b8:27:eb:3c:e5:55
ukphy0 at smsc0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x0001f0, model 0x000c
umass0 at uhub1 port 2 configuration 1 interface 0 "SanDisk Ultra Fit" rev
2.10/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SanDisk, Ultra Fit, 1.00> removable
serial.07815583520326110495
sd1: 14663MB, 512 bytes/sector, 30031250 sectors
uhidev0 at uhub1 port 4 configuration 1 interface 0 "Logitech Gaming Keyboard
G213" rev 2.00/9.00 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub1 port 4 configuration 1 interface 1 "Logitech Gaming Keyboard
G213" rev 2.00/9.00 addr 5
uhidev1: iclass 3/0, 18 report ids
ukbd1 at uhidev1 reportid 1: 0 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=19, output=19, feature=0
uhid2 at uhidev1 reportid 18: input=63, output=63, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd1a (fced472af8a53105.a) swap on sd1b dump on sd1b
WARNING: CHECK AND RESET THE DATE!
gpio0 at bcmgpio0: 54 pins
bwfm0: address b8:27:eb:69:b0:00
wskbd0: disconnecting from wsdisplay0
wskbd0 detached
ukbd0 detached
uhidev0 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd1 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhidev1 detached
uhidev0 at uhub1 port 4 configuration 1 interface 0 "Logitech Gaming Keyboard
G213" rev 2.00/9.00 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub1 port 4 configuration 1 interface 1 "Logitech Gaming Keyboard
G213" rev 2.00/9.00 addr 5
uhidev1: iclass 3/0, 18 report ids
ukbd1 at uhidev1 reportid 1: 0 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 17: input=19, output=19, feature=0
uhid2 at uhidev1 reportid 18: input=63, output=63, feature=0
