Nothing is connected to the Pi except the USB-C for power, the SD
card, and the 3 serial wires.

On 5/9/21, Justin Yang <linuxjus...@gmail.com> wrote:
> Do you have any USB disks connected to your pi? If so, try to remove that
> and boot again to see if it works.
>
> On Sunday, May 9, 2021, Rob Whitlock <rwhitloc...@gmail.com> wrote:
>
>> Hello,
>>
>> I am trying to install OpenBSD 6.9 on a Raspberry Pi 4B. I copied
>> miniroot69.img to the SD card with this command:
>>
>> dd if=miniroot69.img of=/dev/rdisk2 bs=1m
>>
>> I put it in the Pi and upon boot it fails with this error message
>> printed out through serial:
>>
>> U-Boot 2021.01 (Apr 16 2021 - 15:39:01 +1000)
>>
>> DRAM:  1.9 GiB
>> RPI 4 Model B (0xb03114)
>> MMC:   mmcnr@7e300000: 1, emmc2@7e340000: 0
>> Loading Environment from FAT... ** No partition table - mmc 0 **
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   eth0: ethernet@7d580000
>> PCIe BRCM: link up, 5.0 Gbps x1 (SSC)
>> starting USB...
>> Bus xhci_pci: probe failed, error -110
>> No working controllers found
>> Hit any key to stop autoboot:  0
>> switch to partitions #0, OK
>> mmc0 is current device
>> ** Bad device specification :1 bootfstype **
>> "Synchronous Abort" handler, esr 0x96000004
>> elr: 000000000009197c lr : 00000000000930c8 (reloc)
>> elr: 000000003b36d97c lr : 000000003b36f0c8
>> x0 : 6d63625f646e7320 x1 : 000000005f656c62
>> x2 : 000000003b3d30a0 x3 : 0000000000000001
>> x4 : 000000003afe9fe0 x5 : 0000000000000000
>> x6 : 000000003b3d30a0 x7 : 000000003b3d30b0
>> x8 : 000000003afea070 x9 : 0000000000000008
>> x10: 000000003b3d07f2 x11: 000000003af64780
>> x12: 0000000000000000 x13: 0000000000000004
>> x14: 000000003af4be58 x15: 00000000ffffffff
>> x16: 0000000000004110 x17: 2285e5950900a046
>> x18: 000000003af57da0 x19: 000000003afe9940
>> x20: 0000000000000811 x21: 0000000000000811
>> x22: 0000000000000000 x23: 0000000000000000
>> x24: 0000000000000000 x25: 0000000000000000
>> x26: 0000000000000028 x27: 0000000000000003
>> x28: 00000000ffffffff x29: 000000003af4bac0
>>
>> Code: 2a1b03e1 97ffffe5 2a0003f8 1400000d (f8777800)
>> Resetting CPU ...
>>
>> resetting ...
>>
>> Any help would be appreciated.
>>
>> Rob
>>
>>
>
> --
> Justin Yang
>

Reply via email to