Hi guys, I am running OpenBSD 6.9 the machine recognizes an earlier version of
the same wireless PCIe card, namely the WLE200NX but for some, unknown to me reason, the WLE600VX is not recognized. I checked the athn driver support for the chip set which should be AR9280 and it list it. When I boot I get in dmesg: "Atheros QCA986x/988x" rev 0x00 at pci1 dev 0 function 0 not configured pcidump -v: 1:0:0: Atheros QCA986x/988x 0x0000: Vendor ID: 168c, Product ID: 003c 0x0004: Command: 0002, Status: 0010 0x0008: Class: 02 Network, Subclass: 80 Miscellaneous, Interface: 00, Revision: 00 0x000c: BIST: 00, Header Type: 00, Latency Timer: 00, Cache Line Size: 10 0x0010: BAR mem 64bit addr: 0x00000000fe200000/0x00200000 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 0x0030: Expansion ROM Base Address: fe400000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 00 Max Lat: 00 0x0040: Capability 0x01: Power Management State: D0 0x0050: Capability 0x05: Message Signalled Interrupts (MSI) Enabled: no 0x0070: Capability 0x10: PCI Express Max Payload Size: 256 / 256 bytes Max Read Request Size: 512 bytes Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1 fw_update: Path to firmware: http://firmware.openbsd.org/firmware/6.9/ Installed: vmm-firmware-1.11.0p3 Installed, extra: athn-firmware-1.1p4 Does anyone have this WLE600VX card working on OpenBSD? Thanks in advance, Cheers, George