On Thu, 9 Mar 2006, Gustavo Rios wrote:
> Hey folks,
>
> I am trying to connect two sun boxes by means of serial console and
> could not. This is my session output:
>
> # cu -l /dev/cua00 -s 9600
> /dev/cua00: Device not configured
> link down
> #
>
> Here is attached my dmesg.
Not! ;-)
Anyway, depending on the tyype of hardware, your tty's will be
attached to different devices nodes. On my U30:
sabtty0 at sab0 port 0: console i/o
sabtty1 at sab0 port 1
>From man sabtty I learn that the tty names are ttyh0 and ttyh1 No
special callout devices are mentioned, and they are not created by
MAKEDEV.
-Otto
>
>
>
> 2006/2/28, Diana Eichert <[EMAIL PROTECTED]>:
> > On Tue, 28 Feb 2006, Gustavo Rios wrote:
> >
> > > Hey folks,
> > >
> > > i am trying to set my desktop serial console in order to be able to
> > > have serial access to my soekris box.
> > >
> > > I wonder how should i configure my local (desktop box) serial to do
> > > it? I known, the FAQ does not explain what i need:
> >
> > If all your doing is connecting FROM your desktop TO your Soekris you
> > don't have to change anything on the desktop. Just run 'cu' TIP(1) to
> > connect.
> >
> > Example to connect using the 1st com port connect speed 19.2k baud
> >
> > cu -l /dev/cua00 -s 19200
> >
> > 'cua' TTY(4) is the callout device on serial ports
> >
> > diana
>
> [demime 1.01d removed an attachment of type application/octet-stream which
> had a name of dmesg]
