This worked! (Of course). Confusing to me that without the serial port setting changes it seemed like a reboot vs. what I'd expect to just be a failure to interface with the console.
On Tue, Dec 28, 2021 at 2:42 PM Stuart Henderson <stu.li...@spacehopper.org> wrote: > stty com0 9600 (or whatever speed you want to use) > set tty com0 > > On 2021-12-28, Darren S. <phatbuck...@gmail.com> wrote: > > Thought I'd blow the dust off of an apu1 I had around, but the installer > > seems to not fully load the kernel and reboots early on. > > > > In case this device is now mushy on the brain: > > > > - <https://www.pcengines.ch/apu.htm> > > - <https://www.pcengines.ch/apu1d4.htm> > > > > Details: > > - AMD G series T40E APU, 1 GHz dual core (Bobcat core) with 64 bit > support, > > 32K data + 32K instruction + 512KB L2 cache per core > > - DRAM: 2 or 4 GB DDR3-1066 DRAM with a 64 bit bus > > - Storage: Boot from SD card (connected through USB), external USB or > m-SATA > > SSD. 1 SATA data + power connector. > > - Power: About 6 to 12W of 12V DC power depending on CPU load. > > - Expansion: 2 miniPCI express (one with SIM socket for 3G modem), LPC > bus, > > GPIO header, I2C bus, COM2 (3.3V RXD/TXD). > > - Connectivity: 3 Gigabit Ethernet (Realtek RTL8111E), 1 DB9 serial port > > (console). > > - Firmware: coreboot open source system BIOS with support for iPXE and > USB > > boot. > > > > > > Console log: > > > > PC Engines APU BIOS build date: Apr 5 2014 > > > > Reading data from file [bootorder] > > > > SeaBIOS (version ?-20140405_120742-frink) > > > > SeaBIOS (version ?-20140405_120742-frink) > > > > Found coreboot cbmem console @ df150400 > > > > Found mainboard PC Engines APU > > > > Relocating init from 0x000e8e71 to 0xdf1065e0 (size 39259) > > > > Found CBFS header at 0xfffffb90 > > > > found file "bootorder" in cbmem > > > > CPU Mhz=1001 > > > > Found 29 PCI devices (max PCI bus is 06) > > > > Copying PIR from 0xdf160400 to 0x000f27a0 > > > > Copying MPTABLE from 0xdf161400/df161410 to 0x000f25a0 with length 1f4 > > > > Copying ACPI RSDP from 0xdf162400 to 0x000f2580 > > > > Copying SMBIOS entry point from 0xdf16d800 to 0x000f2560 > > > > Using pmtimer, ioport 0x808 > > > > Scan for VGA option rom > > > > EHCI init on dev 00:12.2 (regs=0xf7f08420) > > > > Found 1 lpt ports > > > > Found 2 serial ports > > > > AHCI controller at 11.0, iobase f7f08000, irq 11 > > EHCI init on dev 00:13.2 (regs=0xf7f08520) > > EHCI init on dev 00:16.2 (regs=0xf7f08620) > > Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0 > > AHCI/0: registering: "AHCI/0: SATA SSD ATA-10 Hard-Disk (15272 MiBytes)" > > Searching bootorder for: /rom@img/setup > > Searching bootorder for: /rom@img/memtest > > OHCI init on dev 00:12.0 (regs=0xf7f04000) > > OHCI init on dev 00:13.0 (regs=0xf7f05000) > > OHCI init on dev 00:14.5 (regs=0xf7f06000) > > OHCI init on dev 00:16.0 (regs=0xf7f07000) > > Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0 > > Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1 > > Searching bootorder for: /pci@i0cf8/usb@12,2/storage@5/*@0/*@0,0 > > Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@5 > > USB MSC vendor='Multiple' product='Card Reader' rev='1.00' type=0 > > removable=1 > > Device reports MEDIUM NOT PRESENT > > scsi_is_ready returned -1 > > Unable to configure USB MSC drive. > > Unable to configure USB MSC device. > > USB MSC vendor='SanDisk' product='Cruzer Blade' rev='1.00' type=0 > > removable=1 > > USB MSC blksize=512 sectors=61341696 > > All threads complete. > > Scan for option roms > > Running option rom at c000:0003 > > > > iPXE (http://ipxe.org) 00:00.0 C000 PCI2.10 PnP PMMpmm call arg1=1 > > pmm call arg1=0 > > +DF0E2FD0pmm call arg1=1 > > pmm call arg1=0 > > +DF042FD0 C000 > > > > > > Searching bootorder for: /rom@genroms/pxeboot.rom > > > > Build date: Apr 5 2014 > > System memory size: 4592 MB > > > > Press F12 for boot menu. > > > > Searching bootorder for: HALT > > drive 0x000f2490: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=61341696 > > drive 0x000f24f0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 > > s=31277232 > > Space available for UMB: c1000-ee800, f0000-f2490 > > Returned 253952 bytes of ZoneHigh > > e820 map has 7 items: > > 0: 0000000000000000 - 000000000009fc00 = 1 RAM > > 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED > > 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED > > 3: 0000000000100000 - 00000000df14e000 = 1 RAM > > 4: 00000000df14e000 - 00000000e0000000 = 2 RESERVED > > 5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED > > 6: 0000000100000000 - 000000011f000000 = 1 RAM > > enter handle_19: > > NULL > > Booting from Hard Disk... > > Booting from 0000:7c00 > > Using drive 0, partition 3. > > Loading...... > > probing: pc0 com0 com1 mem[639K 3568M 496M a20=on] > > disk: hd0+ hd1+ > >>> OpenBSD/amd64 BOOT 3.53 > > boot> > > cannot open hd0a:/etc/random.seed: No such file or directory > > booting hd0a:/7.0/amd64/bsd.rd: 3830471+1598464+3907256+0+704512 > > [109+288+28]=0x995530 > > entry point at 0xffffffff81001000 > > PC Engines APU BIOS build date: Apr 5 2014 > > > > > > The last line there shows the boot cycle begin again. What's the advice > on > > troubleshooting/addressing? No crash, so was going to work back in > versions > > and see if anything takes. > > > > > -- > Please keep replies on the mailing list. > > -- Darren Spruell phatbuck...@gmail.com