On 5/6/22 12:48 PM, Theo de Raadt wrote:
Florian Obser <flor...@openbsd.org> wrote:
So, if you end up with a /bsd.upgrade on the running system that is
still mode 0700, your bootloader is on the fritz.
If you have a /bsd.upgrade that's 0600 your bootloader found the kernel
and tried to boot it, but the installer didn't get very far.
If there is no /bsd.upgrade after a reboot and no email to root the
installer got rebooted by a watchdog process, otherwise you got an email
to root detailing the upgrade process.
A very nice 3-way split.
Brilliant, even.
Then once you figure out which one of those 3 is happening, it is easy
to reason about how to create further differentiations and see which is
happening.
I was very much guessing it was /boot, but no.
-rw------- 1 root wheel 4609699 May 6 13:13 bsd.upgrade
So ... it's booting bsd.upgrade and failing, which explains why copying
bsd.upgrade (aka bsd.rd) to /bsd tossed it into a lala-loop.
Unfortunately, this machine doesn't retain dmesg buffer between boots.
so ... booted bsd.rd with a monitor attached, and grabbed the dmesg below.
I'm looking at this:
efifb0 at mainbus0: 1920x1080, 32bpp
If the system is booted (bsd) without a monitor attached, that says:
efifb at mainbus0 not configured
Getting to the boot> prompt, typing "boot bsd.rd", unplugging the monitor
and hitting "ENTER" resulted in a successful boot of the bsd.rd kernel (and
efifb is showing the monitor as connected).
I tried bsd.rd renamed "bsd" so it would only boot bsd.rd, and then firing
the machine up and plugged the monitor in AFTER the boot process (probably)
started hoping to see some indication on the screen of the crash. Result:
no display until the kernel crashes and the system reboots.
Nick.
OpenBSD 7.1-current (RAMDISK_CD) #468: Tue May 3 12:18:55 MDT 2022
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 1686781952 (1608MB)
avail mem = 1631703040 (1556MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x6a8a7000 (23 entries)
bios0: vendor AMI version "N41 v01.06" date 03/14/2019
bios0: HP HP t430 Thin Client
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT SSDT SSDT
SSDT SSDT SSDT SSDT SSDT SSDT UEFI DBGP SSDT WDAT NHLT WSMT
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) N4000 CPU @ 1.10GHz, 1096.97 MHz, 06-7a-01
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,UMIP,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus 2 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0: not present
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"ALPS0001" at acpi0 not configured
"WCOM508E" at acpi0 not configured
"FS4304" at acpi0 not configured
acpicmos0 at acpi0
"INT33A1" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"USBC000" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Gemini Lake Host" rev 0x03
"Intel Gemini Lake GNA" rev 0x03 at pci0 dev 0 function 3 not configured
"Intel UHD Graphics 600" rev 0x03 at pci0 dev 2 function 0 not configured
"Intel Gemini Lake HD Audio" rev 0x03 at pci0 dev 14 function 0 not configured
"Intel Gemini Lake MEI" rev 0x03 at pci0 dev 15 function 0 not configured
ppb0 at pci0 dev 19 function 0 "Intel Gemini Lake PCIE" rev 0xf3: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400),
msi, address 04:0e:3c:12:53:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 19 function 1 "Intel Gemini Lake PCIE" rev 0xf3: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 9260" rev 0x29, msix
xhci0 at pci0 dev 21 function 0 "Intel Gemini Lake xHCI" rev 0x03: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
sdhc0 at pci0 dev 28 function 0 "Intel Gemini Lake eMMC" rev 0x03: apic 1 int 39
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma
"Intel Gemini Lake LPC" rev 0x03 at pci0 dev 31 function 0 not configured
"Intel Gemini Lake SMBus" rev 0x03 at pci0 dev 31 function 1 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, hA8aP>, 0000> removable
sd0: 15028MB, 512 bytes/sector, 30777344 sectors
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Chicony USB Keyboard" rev
1.10/3.90 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Chicony USB Keyboard" rev
1.10/3.90 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
"vendor 0x8087 product 0x0025" rev 2.00/0.02 addr 3 at uhub0 port 6 not
configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
iwm0: could not read firmware iwm-9260-46 (error 2)
iwm0: failed to load init firmware
