On Wed, Aug 31, 2022 at 01:13:11PM +0100, li...@xza.fr wrote: > > SCANNING ON OPENBSD WITH SANE, AS NON-ROOT USER > > foreword: wanted to put this guide somewhere > > > install sane: > > # pkg_add sane > > > plug in the scanner, and immediately after, run this command: > > # dmesg | tail -20 > ugen0 at uhub0 port 3 "<scanner name>" > > the output should appear as above > > > now take a note of the number after 'ugen' and the number after > 'uhub'. in this example that number is 0 for both. > > now to get a bit more info on the hardware, run: > > # usbdevs > Controller /dev/usb0: > addr 01: ____ > addr 02: XXXX:YYYY <scanner name> > > the output should appear as above > > > so say we want to scan as the user 'theo', then theo needs access to > both /dev/usb0 as well as /dev/ugen0.00 > > so execute the following command > > # chgrp theo /dev/ugen0.* /dev/usb0 > # chmod g+rwx /dev/ugen0.* /dev/usb0
What's wrong with /usr/local/share/doc/pkg-readmes/sane-backends ?
