Hello misc@ I get the following error when trying to install go (for mips64/octeon):
# pkg_add go quirks-6.42 signed on 2022-10-08T21:12:07Z Ustar [http://cdn.openbsd.org/pub/OpenBSD/7.2/packages/mips64/go-1.19.1p0.tgz][go/pkg/openbsd_mips64/cmd/compile/internal/reflectdata.a]: Premature end of archive Adjusting sha for /usr/local/go/pkg/openbsd_mips64/cmd/compile/internal/reflectdata.a from /dvcLn8+FQ5qji2A6mxyIWODWY35KxCB9u4isEHanf0= to 47DEQpj8HBSa+/TImW+5JCeuQeRkm5NMpJWZG3hSuFU= pkg_add: Installation of go-1.19.1p0 failed, partial installation recorded as partial-go-1.19.1p0 Changing /etc/installurl makes no difference. In addition to the above CDN, I have tried www.mirrorservice.org mirrors.gethosted.online mirror.laylo.io same result. How can I get around this problem? I'd like to avoid compiling on the device itself because it has limited resources for that type of thing. It is only this pkg with this problem. There are no connectivity issues. Alternatively, is it feasible to build an amd64 vm and cross-compile there, for mips64/octeon? dmesg follows: [ using 752776 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2022 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 7.2 (GENERIC.MP) #1063: Tue Sep 27 19:23:10 MDT 2022 dera...@octeon.openbsd.org:/usr/src/sys/arch/octeon/compile/GENERIC.MP real mem = 536870912 (512MB) avail mem = 521322496 (497MB) random: good seed from bootblocks mainbus0 at root: board 20002 rev 2.18, model CN3xxx/CN5xxx cpu0 at mainbus0: CN50xx CPU rev 0.1 500 MHz, Software FP emulation cpu0: cache L1-I 32KB 4 way D 16KB 64 way, L2 128KB 8 way cpu1 at mainbus0: CN50xx CPU rev 0.1 500 MHz, Software FP emulation cpu1: cache L1-I 32KB 4 way D 16KB 64 way, L2 128KB 8 way clock0 at mainbus0: int 5 octcrypto0 at mainbus0 iobus0 at mainbus0 simplebus0 at iobus0: "soc" octciu0 at simplebus0 octsmi0 at simplebus0 octpip0 at simplebus0 octgmx0 at octpip0 interface 0 cnmac0 at octgmx0: port 0 RGMII, address f0:9f:c2:12:31:db atphy0 at cnmac0 phy 7: AR8035 10/100/1000 PHY, rev. 2 cnmac1 at octgmx0: port 1 RGMII, address f0:9f:c2:12:31:dc atphy1 at cnmac1 phy 6: AR8035 10/100/1000 PHY, rev. 2 cnmac2 at octgmx0: port 2 RGMII, address f0:9f:c2:12:31:dd atphy2 at cnmac2 phy 5: AR8035 10/100/1000 PHY, rev. 2 com0 at simplebus0: ns16550a, 64 byte fifo com0: console dwctwo0 at iobus0 base 0x1180068000000 irq 56 usb0 at dwctwo0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Octeon DWC2 root hub" rev 2.00/1.00 addr 1 octrng0 at iobus0 base 0x1400000000000 irq 0 umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk' Cruzer Fit" rev 2.00/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <SanDisk', Cruzer Fit, 1.00> removable serial.07815571020705203013 sd0: 29340MB, 512 bytes/sector, 60088320 sectors vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (a804a0144e807aaa.a) swap on sd0b dump on sd0b WARNING: CHECK AND RESET THE DATE! tia, --