Hi all,
Attempting to do single-os install of OpenBSD on my 2019 13” Intel MacBook Pro,
but the nvme drive is not detected during installation. The usb drive
containing the installer is detected without issue. `machine diskinfo` at the
boot prompt lists the nvme. This occurs with both 7.2-current as well as a 7.2
release builds. For boot loaders, I attempted an option-key boot as well as
booting from refind. Neither worked. I have also attempted to install the
`apple-boot-firmware` into the install image using the FAQ instructions on
bootstrapping firmware. As a long shot, I also tried to repartition the drive
with GPT (and formatted as Fat) using disk utility during boot recovery, but no
joy. Finally, dmesg (provided below) shows several unconfigured Apple entries,
including a “mass storage device”. I’m at a bit of a loss on what to try next.
Has anyone had success with this generation to MacBooks? I know Asahi has
support for M-series MacBooks, and I’ve seen reports online of older MacBooks
with working installs. Thanks in advance.
Best,
- Logan
dmesg.txt:
OpenBSD 7.2-current (RAMDISK_CD) #955: Mon Jan 30 18:25:22 MST 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16987197440 (16200MB)
avail mem = 16468348928 (15705MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.3 @ 0x88ecf000 (38 entries)
bios0: vendor Apple Inc. version "1731.140.2.0.0 (iBridge: 19.16.16067.0.0,0)"
date 06/28/2022
bios0: Apple Inc. MacBookPro15,2
acpi0 at bios0: ACPI 5.0
acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT SSDT ECDT HPET APIC SBST SSDT
SSDT SSDT SSDT SSDT SSDT DMAR MCFG
acpiec0 at acpi0
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-8259U CPU @ 2.30GHz, 3790.42 MHz, 06-8e-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,OSXSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SRBDS_CTRL,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
4-way L2 cache, 6MB 64b/line 12-way L3 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 3 (RP05)
acpiprt4 at acpi0: bus 121 (RP09)
acpiprt5 at acpi0: bus 2 (RP13)
acpipci0 at acpi0 PCI0
"ACPI000E" at acpi0 not configured
"APP0001" at acpi0 not configured
"ACPI0001" at acpi0 not configured
"ACPI0002" at acpi0 not configured
"APP9876" at acpi0 not configured
"BCM2E7C" at acpi0 not configured
"INT34BA" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"APP0002" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
acpicpu at acpi0 not configured
cpu0: using VERW MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x08
"Intel Iris Plus 655" rev 0x01 at pci0 dev 2 function 0 not configured
"Intel 300 Series Thermal" rev 0x30 at pci0 dev 18 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 300 Series xHCI" rev 0x30: msi, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 300 Series Shared SRAM" rev 0x30 at pci0 dev 20 function 2 not configured
"Intel 300 Series MEI" rev 0x30 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 300 Series PCIE" rev 0xf0: msi
pci1 at ppb0 bus 1
vendor "Broadcom", unknown product 0x4464 (class network subclass
miscellaneous, rev 0x03) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 28 function 4 "Intel 300 Series PCIE" rev 0xf0: msi
pci2 at ppb1 bus 3
ppb2 at pci2 dev 0 function 0 vendor "Intel", unknown product 0x1578 rev 0x06
pci3 at ppb2 bus 4
ppb3 at pci3 dev 0 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi
pci4 at ppb3 bus 5
"Intel JHL7540 Thunderbolt 3" rev 0x06 at pci4 dev 0 function 0 not configured
ppb4 at pci3 dev 1 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi
pci5 at ppb4 bus 7
ppb5 at pci3 dev 2 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi
pci6 at ppb5 bus 6
xhci1 at pci6 dev 0 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi,
xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
ppb6 at pci3 dev 4 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi
pci7 at ppb6 bus 64
ppb7 at pci0 dev 29 function 0 "Intel 300 Series PCIE" rev 0xf0: msi
pci8 at ppb7 bus 121
ppb8 at pci8 dev 0 function 0 vendor "Intel", unknown product 0x1578 rev 0x06
pci9 at ppb8 bus 122
ppb9 at pci9 dev 0 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi
pci10 at ppb9 bus 123
"Intel JHL7540 Thunderbolt 3" rev 0x06 at pci10 dev 0 function 0 not configured
ppb10 at pci9 dev 1 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi
pci11 at ppb10 bus 125
ppb11 at pci9 dev 2 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi
pci12 at ppb11 bus 124
xhci2 at pci12 dev 0 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi,
xHCI 1.10
usb2 at xhci2: USB revision 3.0
uhub2 at usb2 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
ppb12 at pci9 dev 4 function 0 "Intel JHL7540 Thunderbolt 3" rev 0x06: msi
pci13 at ppb12 bus 182
ppb13 at pci0 dev 29 function 4 "Intel 300 Series PCIE" rev 0xf0: msi
pci14 at ppb13 bus 2
vendor "Apple", unknown product 0x2005 (class mass storage subclass
miscellaneous, rev 0x01) at pci14 dev 0 function 0 not configured
vendor "Apple", unknown product 0x1801 (class prehistoric subclass
miscellaneous, rev 0x01) at pci14 dev 0 function 1 not configured
vendor "Apple", unknown product 0x1802 (class prehistoric subclass
miscellaneous, rev 0x01) at pci14 dev 0 function 2 not configured
vendor "Apple", unknown product 0x1803 (class multimedia subclass audio, rev
0x01) at pci14 dev 0 function 3 not configured
"Intel 300 Series UART" rev 0x30 at pci0 dev 30 function 0 not configured
"Intel 300 Series LPC" rev 0x30 at pci0 dev 31 function 0 not configured
"Intel 300 Series HD Audio" rev 0x30 at pci0 dev 31 function 3 not configured
"Intel 300 Series SMBus" rev 0x30 at pci0 dev 31 function 4 not configured
"Intel 300 Series SPI" rev 0x30 at pci0 dev 31 function 5 not configured
isa0 at mainbus0
efifb0 at mainbus0: 2880x1800, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation)
umass0 at uhub1 port 3 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev
3.20/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable
serial.0781559581076bad5998
sd0: 58674MB, 512 bytes/sector, 120164352 sectors
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
uhidev0 at uhub0 port 9 configuration 1 interface 0 "ZSA Technology Labs Planck
EZ Glow" rev 2.00/0.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 9 configuration 1 interface 1 "ZSA Technology Labs Planck
EZ Glow" rev 2.00/0.00 addr 2
uhidev1: iclass 3/0
uhid at uhidev1 not configured
uhidev2 at uhub0 port 9 configuration 1 interface 2 "ZSA Technology Labs Planck
EZ Glow" rev 2.00/0.00 addr 2
uhidev2: iclass 3/0, 6 report ids
uhid at uhidev2 reportid 3 not configured
uhid at uhidev2 reportid 4 not configured
ukbd1 at uhidev2 reportid 6
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
ukbd0: was console keyboard
wskbd0 detached
ukbd0 detached
uhidev0 detached
uhidev1 detached
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd1 detached
uhidev2 detached
uhidev0 at uhub0 port 9 configuration 1 interface 0 "ZSA Technology Labs Planck
EZ Glow" rev 2.00/0.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 9 configuration 1 interface 1 "ZSA Technology Labs Planck
EZ Glow" rev 2.00/0.00 addr 2
uhidev1: iclass 3/0
uhid at uhidev1 not configured
uhidev2 at uhub0 port 9 configuration 1 interface 2 "ZSA Technology Labs Planck
EZ Glow" rev 2.00/0.00 addr 2
uhidev2: iclass 3/0, 6 report ids
uhid at uhidev2 reportid 3 not configured
uhid at uhidev2 reportid 4 not configured
ukbd1 at uhidev2 reportid 6
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
