On 4/20/23 05:56, Raja Sekhar wrote:
Hi,
I am running OpenBSD_7.1 on VMWare workstation16. It has two hard disks(wd0
& sd0)
I am trying to get hard disk information using the following command.
*$atactl <disk> identify*
If I use the disk wd0, I am getting output immediately.
If I use the disk sd0, I am getting the output after 10 seconds.
I need to trigger the above command multiple times, it is causing delay in
my scenario.
When I go through the kernel code the delay is occuring in scsi_xs_sync()
function.
What's the problem and what is the fix for this issue.
well, the problem is pretty clearly in VMware Workstation.
I don't see a problem with real hw.
First, I'd start by getting to 7.3. See if your "problem" is still
showing.
Second, I'd look at the virtual HW you have selected. Try a different
interface card emulation. And why do you have different types of
hardware on a VM anyway? Put your virtual disks on the hw that
works best for you.
So many questions would be answered with a dmesg...
Nick.
Nick.