-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello.
I have the same problem.
I have 2 Fw, the Master is a Dell 2850 (2 processors) and the slave is
a Dell 2850, with 1 processor, both with 3 dual cards.
The NTPD daemon doesn't work in the Master. I mean, the date/time is
always wrong (is it a bug in OpenBSD 3.7 with SMP ??).
When the difference between Master and Slave's date/time becomes too
large, the carp goes down!!
The Master becomes Slave, and the Slave becomes Master.
Using NTPDATE in cron (30 minutes), I was able to handle this weird
behavior.
Take a look in your date/time, maybe it's the reason of your strange
carp issues.
[]'s
Nadal
Bryan Irvine wrote:
> Thought so. Had the same problem. Never got them working with
> CARP.
>
> There's some threads in the archives, but they probably won't help
> since there is apparently no solution.
>
> --Bryan
>
> On 3/15/06, Steven S <[EMAIL PROTECTED]> wrote:
>
>> Bryan Irvine wrote:
>>
>>> I don't suppose you are using a quad card of some kind are you?
>>>
>>>
>>>
>> ... Three dual cards, dmesg (extracted from /var/log/messages)
>> below:
>>
>> OpenBSD 3.8-stable (GENERIC.MP) #0: Thu Jan 5 03:55:53 EST 2006
>> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
>> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 798 MHz cpu0:
>>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
>> FXSR,SSE real mem = 536436736 (523864K) avail mem = 482525184
>> (471216K) using 4278 buffers containing 26923008 bytes (26292K)
>> of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS,
>> date 12/31/99, BIOS32 rev. 0 @ 0xf0000 pcibios0 at bios0: rev 2.1
>> @ 0xf0000/0x2000 pcibios0: PCI BIOS has 6 Interrupt Routing table
>> entries pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks
>> ROSB4 SouthBridge" rev 0x00) pcibios0: PCI bus #1 is the last bus
>> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xe8000/0x6000
>> 0xee000/0x2000! mainbus0: Intel MP Specification (Version 1.4)
>> (COMPAQ PROLIANT ) cpu0 at mainbus0: apid 3 (boot processor)
>> cpu0: apic clock running at 132 MHz cpu1 at mainbus0: apid 0
>> (application processor) cpu1: Intel Pentium III ("GenuineIntel"
>> 686-class) 797 MHz cpu1:
>>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
>> FXSR,SSE mainbus0: bus 0 is type PCI mainbus0: bus 3 is type PCI
>> mainbus0: bus 9 is type ISA ioapic0 at mainbus0: apid 8 pa
>> 0xfec00000, version 11, 35 pins ioapic0: misconfigured as apic 0,
>> remapped to apic 8 pci0 at mainbus0 bus 0: configuration mode 1
>> (no bios) pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE
>> Host" rev 0x05 pchb1 at pci0 dev 0 function 1 "ServerWorks
>> CNB20LE Host" rev 0x05 pci1 at pchb1 bus 3 fxp0 at pci1 dev 4
>> function 0 "Intel 82557" rev 0x08, i82559: apic 8 int 10 (irq
>> 10), address 00:50:8b:e2:6e:fb inphy0 at fxp0 phy 1: i82555
>> 10/100 PHY, rev. 4 fxp1 at pci1 dev 5 function 0 "Intel 82557"
>> rev 0x08, i82559: apic 8 int 11 (irq 11), address
>> 00:50:8b:e2:6e:fa inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
>> ppb0 at pci1 dev 6 function 0 "DEC 21154 PCI-PCI" rev 0x05 pci2
>> at ppb0 bus 4 fxp2 at pci2 dev 4 function 0 "Intel 82557" rev
>> 0x08, i82559: apic 8 int 11 (irq 11), address 00:02:a5:60:58:50
>> inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4 fxp3 at pci2 dev
>> 5 function 0 "Intel 82557" rev 0x08, i82559: apic 8 int 10 (irq
>> 10), address 00:02:a5:60:58:51 inphy3 at fxp3 phy 1: i82555
>> 10/100 PHY, rev. 4 cac0 at pci0 dev 1 function 0 "Symbios Logic
>> 53c1510" rev 0x02: apic 8 int 3 (irq 3) Compaq Integrated Array
>> scsibus0 at cac0: 1 targets sd0 at scsibus0 targ 0 lun 0:
>> <Compaq, RAID1 volume #, > SCSI2 0/direct fixed sd0: 17359MB,
>> 4357 cyl, 255 head, 32 sec, 512 bytes/sec, 35553120 sec total
>> vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a wsdisplay0
>> at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0:
>> screen 1-5 added (80x25, vt100 emulation) "Compaq Netelligent
>> ASMC" rev 0x00 at pci0 dev 4 function 0 not configured ppb1 at
>> pci0 dev 5 function 0 "IBM 82351 PCI-PCI" rev 0x01 pci3 at ppb1
>> bus 1 tl0 at pci3 dev 0 function 0 "Compaq DP Netelligent
>> 10/100TX" rev 0x10: apic 8 int 5 (irq 5) address
>> 00:08:c7:a4:84:6d nsphy0 at tl0 phy 1: DP83840 10/100 PHY, rev. 1
>> ukphy0 at tl0 phy 31: Generic IEEE 802.3u media interface
>> ukphy0: OUI 0x100014, model 0x0001, rev. 5 tl1 at pci3 dev 1
>> function 0 "Compaq DP Netelligent 10/100TX" rev 0x10: apic 8 int
>> 7 (irq 7) address 00:08:c7:a4:84:ed nsphy1 at tl1 phy 1: DP83840
>> 10/100 PHY, rev. 1 ukphy1 at tl1 phy 31: Generic IEEE 802.3u
>> media interface ukphy1: OUI 0x100014, model 0x0001, rev. 5 pcib0
>> at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev
>> 0x4f pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev
>> 0x00: DMA atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at
>> atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <COMPAQ,
>> CD-ROM CRN-8241B, 2.23> SCSI0 5/cdrom removable cd0(pciide0:1:0):
>> using PIO mode 4, DMA mode 2 isa0 at pcib0 isadma0 at isa0 pckbc0
>> at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq
>> 1 for kbd slot wskbd0 at pckbd0: console keyboard, using
>> wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for
>> aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0
>> at pcppi0: <PC speaker> spkr0 at pcppi0 sysbeep0 at pcppi0 npx0
>> at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port
>> 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6
>> irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>> biomask 0 netmask 0 ttymask 0 pctr: 686-class user-level
>> performance counters enabled mtrr: Pentium Pro MTRR support
>> dkcsum: sd0 matches BIOS drive 0x80 root on sd0a rootdev=0x400
>> rrootdev=0xd00 rawdev=0xd02
>
>
>
- --
+-------------------------------------------------------+
| Anderson Nadal <[EMAIL PROTECTED]> - RHCE |
| Coordenador Tecnico |
| Fone: + 55 41 3331 8200 |
| FAX: + 55 41 3331 8256 |
| OndaRPC |
| www.ondarpc.com.br |
| Registered Linux User: 56841 |
| PGP KEY: www.keyserver.net KEY ID 6ABB668D |
| M.O.V.I |
+-------------------------------------------------------+
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
iD8DBQFEGrriLQAusHT90XQRApfOAJ9C7HzU3Fjx7saI6dSx3BRkw7+gnACdHk5F
mtkqIwAhxRcNyFwc8M8UCFQ=
=78r6
-----END PGP SIGNATURE-----
