(Not subscribed to misc@, so please CC me in all replies.) I've got an odd situation that I'm having trouble getting to the bottom of, but I'll first admit that I haven't been able to yet rule out a hardware issue and I also may currently be too close to the problem (despite sleeping on it several times):
I have an external VT100 terminal connected to my 2015 13in MacBook Air running OpenBSD amd64/7.4-release/stable via a Keyspan/Tripp-Lite USA-19HS USB to DB-9 serial adapter. The USA-19HS uses ukspan(4) which was added in 6.6. I've added a ttys(5) line, HUPed INIT, have run ttyflags(8) (more specifics below), have the terminal configured for 9600 8N1 with no flow control, and the terminal does display the login prompt generated by getty(8). Unfortunately, regardless of what input is provided on the terminal, getty(8) just sends a new login prompt. I only have the one USA-19HS, one specific original serial cable, and the terminal, all the exact set that were used approximately 10 years ago. Though, at that time I was connecting it to an Intel MacBook Pro running some version of Mac OS X with the Keyspan drivers installed and similarly using getty. I have performed hardware repairs on the terminal, so -- again -- I can't yet rule out hardware issues and certainly not driver issues. dmesg (trimmed; full at the end, including `usbdevs -v` output): ``` ukspan0 at uhub3 port 3 "Keyspan, a division of InnoSys Inc. Keyspan USA-19H" rev 1.10/1.00 addr 20 ucom1 at ukspan0: usb0.1.00334. ``` /etc/ttys ``` console "/usr/libexec/getty std.9600" vt220 off secure ttyU1 "/usr/libexec/getty std.9600" vt100 on local ``` Per ttys(5), whenever I modify /etc/ttys, I do the following: ``` doas kill -HUP 1 doas ttyflags -va doas ttyflags -p ttyU1 pgrep -fl ttyU1 top -g ttyU1 ``` I've found it more reliable -- when making changes -- to specifically set my ttys(5) line to 'off', perform the aforementioned steps, then change the line to 'on' and repeat. I have experimented with the following with no change in the underlying issue of the terminal showing the login prompt, but each character input causing the login prompt to be resent: - ttys(5) 'secure' option (shouldn't be necessary, since I don't intend to authenticate as root) - ttys(5) 'local' option - ttys(5) 'softcar' option (shouldn't be necessary, since I am getting a connection; see [0]) - either "no flow control" or "software flow control" enabled on the terminal - ttys(5) 'rtscts' option with "hardware flow control" enabled on the terminal - ttys(5) 'mdmbug' option with "hardware flow control" enabled on the terminal - ttys(5) 'rtscts' and 'mdmbug' options with "hardware flow control" enabled on the terminal I also tried specifying 'cuaU1' device instead of 'ttyU1' for all of the above (see [1]) with no change, other than `ttysflags -a` saying the device is busy and not setting any flags. I have tried different speeds, writing custom gettytab(5) lines to change various XON/XOFF settings and "software flow control" enabled on the terminal. My next steps, when I have time and in no particular order, are to: - Retry various experiments with getty(8) off and using cu(1) to connect directly to the terminal, sending characters back and forth from each end - Try on a couple other pieces of amd64 & i386 hardware running OpenBSD which have built-in serial (they need upgrades to 7.4 and I don't recall the state of serial hardware support) - Order a USB to DB-9 serial adapter with genuine FTDI chips (that may rule out driver issues, but would also likely let me test under macOS on my M1 Mac mini) - Test and map the pinouts on the original serial cable I'm really only looking for confirmation that the source[2] I used to refresh my memory on software (XON/XOFF) vs hardware (RTS/CTS and/or DTR/DCD) flow control is reasonably accurate and if my description of this issue jumps out to you as any likely cause. Thanks in advance for any thoughts or suggestions, Morgan [0] <https://marc.info/?l=openbsd-misc&m=139089795907395&w=2> [1] <https://marc.info/?l=openbsd-misc&m=153899266502330&w=2> [2] <https://www.lammertbies.nl/comm/info/rs-232-flow-control> OpenBSD 7.4 (GENERIC.MP) #1397: Tue Oct 10 09:02:37 MDT 2023 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8469352448 (8077MB) avail mem = 8192921600 (7813MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x8afac000 (33 entries) bios0: vendor Apple Inc. version "195.0.0.0.0" date 06/11/2020 bios0: Apple Inc. MacBookAir7,2 efi0 at bios0: UEFI 1.1 acpi0 at bios0: ACPI 5.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT DMAR MCFG acpi0: wakeup devices PEG0(S3) EC__(S3) HDEF(S3) RP01(S3) RP02(S3) RP03(S4) ARPT(S4) RP05(S3) RP06(S3) SPIT(S3) XHC1(S3) ADP1(S3) LID0(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 1000.01 MHz, 06-3d-04, patch 0000002f cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 100MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 1000.01 MHz, 06-3d-04, patch 0000002f cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 1000.03 MHz, 06-3d-04, patch 0000002f cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 1000.02 MHz, 06-3d-04, patch 0000002f cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins acpiec0 at acpi0 acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-155 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus 5 (RP05) acpiprt6 at acpi0: bus 4 (RP06) acpisbs0 at acpi0: SBS0 model "A1405" serial 8 type LION oem "iFixit" acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001 acpicmos0 at acpi0 asmc0 at acpi0: SMC_ (smc-huronriver) addr 0x300/0x20: rev 2.27f627, 612 keys "ACPI0008" at acpi0 not configured "ACPI0001" at acpi0 not configured "APP000D" at acpi0 not configured acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0(wakeup) acpibtn1 at acpi0: PWRB abl0 at acpi0: PNLF (backlight) acpibtn2 at acpi0: SLPB acpicpu0 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpivideo0 at acpi0: IGPU acpivout0 at acpivideo0: DD01 cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 1000 MHz: speeds: 2201, 2200, 2100, 1800, 1600, 1300, 1100, 900, 700, 500 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 6000" rev 0x09 drm0 at inteldrm0 inteldrm0: msi, BROADWELL, gen 8 azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi azalia0: No codecs found xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 9 Series DMA" rev 0x03 at pci0 dev 21 function 0 not configured "Intel 9 Series SPI" rev 0x03 at pci0 dev 21 function 4 not configured "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi azalia1: codecs: Cirrus Logic CS4208 audio0 at azalia1 ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi pci2 at ppb1 bus 2 "Broadcom BCM15700A2" rev 0x00 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi pci3 at ppb2 bus 3 bwfm0 at pci3 dev 0 function 0 "Broadcom BCM43602" rev 0x01: msi ppb3 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi pci4 at ppb3 bus 5 ppb4 at pci4 dev 0 function 0 vendor "Intel", unknown product 0x156b rev 0x00 pci5 at ppb4 bus 6 ppb5 at pci5 dev 0 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci6 at ppb5 bus 7 vendor "Intel", unknown product 0x156a (class system subclass miscellaneous, rev 0x00) at pci6 dev 0 function 0 not configured ppb6 at pci5 dev 3 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci7 at ppb6 bus 8 ppb7 at pci5 dev 4 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci8 at ppb7 bus 57 ppb8 at pci5 dev 5 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci9 at ppb8 bus 106 ppb9 at pci5 dev 6 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci10 at ppb9 bus 107 ppb10 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi pci11 at ppb10 bus 4 nvme0 at pci11 dev 0 function 0 "Samsung SM981/PM981 NVMe" rev 0x00: msix, NVMe 1.3 nvme0: Samsung SSD 970 EVO Plus 500GB, firmware 2B2QEXM7, serial S58SNM0T605601L scsibus1 at nvme0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 2B2Q> sd0: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 iic0: addr 0x2c 03=fc 05=6a 06=60 71=06 72=80 86=73 90=37 91=27 92=24 93=3d 94=41 95=3c 96=69 97=86 98=22 99=1f 9a=84 9f=7c a0=7f a1=b5 a2=bf a3=7b a4=28 a5=cf a6=64 a7=2d words 00=0000 01=0000 02=00fc 03=fc00 04=006a 05=6aa0 06=a000 07=0000 pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 isa0 at pcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhub1 at uhub0 port 1 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/0.01 addr 2 uaudio0 at uhub1 port 1 configuration 1 interface 1 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 4 ctls audio1 at uaudio0 uhidev0 at uhub1 port 1 configuration 1 interface 3 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uhidev0: iclass 3/0, 18 report ids uhidpp0 at uhidev0 uhid0 at uhidev0 reportid 1: input=63, output=63, feature=63 uhid1 at uhidev0 reportid 18: input=63, output=63, feature=0 umass0 at uhub1 port 2 configuration 1 interface 0 "Hitachi-LG Data Storage Inc Portable Super Multi Drive" rev 2.00/0.00 addr 4 umass0: using ATAPI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 cd0 at scsibus2 targ 1 lun 0: <HL-DT-ST, DVDRAM GP60NB50, PE00> removable uhidev1 at uhub1 port 3 configuration 1 interface 0 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev1: iclass 3/1 ums0 at uhidev1: 16 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev2 at uhub1 port 3 configuration 1 interface 1 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev2: iclass 3/0 uhid2 at uhidev2: input=64, output=64, feature=0 uhidev3 at uhub1 port 3 configuration 1 interface 2 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev3: iclass 3/0, 4 report ids uhid3 at uhidev3 reportid 1: input=1, output=0, feature=0 ucc0 at uhidev3 reportid 2: 18 usages, 13 keys, enum wskbd0 at ucc0 mux 1 ukbd0 at uhidev3 reportid 4: no usable key codes array uhub2 at uhub1 port 4 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/0.01 addr 6 uvideo0 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech Webcam C925e" rev 2.00/0.16 addr 7 video0 at uvideo0 uaudio1 at uhub2 port 1 configuration 1 interface 3 "Logitech Logitech Webcam C925e" rev 2.00/0.16 addr 7 uaudio1: class v1, high-speed, sync, channels: 0 play, 2 rec, 2 ctls audio2 at uaudio1 axe0 at uhub2 port 2 configuration 1 interface 0 "Apple Computer Ethernet A1277" rev 2.00/0.01 addr 8 axe0: AX88772, address 08:6d:41:e4:58:f7 ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0006 uhub3 at uhub2 port 3 configuration 1 interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/6.63 addr 9 ukspan0 at uhub3 port 3 "Keyspan, a division of InnoSys Inc. Keyspan USA-19H" rev 1.10/1.00 addr 10 ucom0 at ukspan0: usb0.1.00334.0 uhub4 at uhub2 port 4 configuration 1 interface 0 "Alcor Micro product 0x6254" rev 2.00/1.00 addr 11 uhidev4 at uhub0 port 3 configuration 1 interface 0 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 12 uhidev4: iclass 3/1, 1 report id ukbd1 at uhidev4 reportid 1: 8 variable keys, 6 key codes wskbd1 at ukbd1: console keyboard uhidev5 at uhub0 port 3 configuration 1 interface 1 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 12 uhidev5: iclass 3/1, 2 report ids ums1 at uhidev5 reportid 2: 3 buttons wsmouse1 at ums1 mux 0 ugen0 at uhub0 port 3 configuration 1 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 12 uhidev6 at uhub0 port 5 configuration 1 interface 0 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 13 uhidev6: iclass 3/0, 63 report ids uhid4 at uhidev6 reportid 63: input=64, output=0, feature=0 uhidev7 at uhub0 port 5 configuration 1 interface 1 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 13 uhidev7: iclass 3/1, 82 report ids ukbd2 at uhidev7 reportid 1: 8 variable keys, 6 key codes, country code 33 wskbd2 at ukbd2 mux 1 uhid5 at uhidev7 reportid 9: input=0, output=0, feature=3 uhid6 at uhidev7 reportid 63: input=64, output=0, feature=0 ucc1 at uhidev7 reportid 82: 5 usages, 3 keys, enum wskbd3 at ucc1 mux 1 ubcmtp0 at uhub0 port 5 configuration 1 interface 2 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 13 wsmouse2 at ubcmtp0 mux 0 uhub5 at uhub0 port 12 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/0.01 addr 14 uhub6 at uhub5 port 4 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/0.01 addr 15 uhub7 at uhub6 port 3 configuration 1 interface 0 "GenesysLogic USB3.1 Hub" rev 3.20/6.63 addr 16 umass1 at uhub7 port 2 configuration 1 interface 0 "Seagate Expansion HDD" rev 3.20/19.01 addr 17 umass1: using SCSI over Bulk-Only scsibus3 at umass1: 2 targets, initiator 0 sd1 at scsibus3 targ 1 lun 0: <Seagate, Expansion HDD, 1901> serial.0bc220360000NAC5RGDC sd1: 1907729MB, 512 bytes/sector, 3907029167 sectors umass2 at uhub0 port 14 configuration 1 interface 0 "Apple Card Reader" rev 3.00/8.20 addr 18 umass2: using SCSI over Bulk-Only scsibus4 at umass2: 2 targets, initiator 0 sd2 at scsibus4 targ 1 lun 0: <APPLE, SD Card Reader, 3.00> removable serial.05ac8406000000000820 vscsi0 at root scsibus5 at vscsi0: 256 targets softraid0 at root scsibus6 at softraid0: 256 targets root on sd0a (e8e1929ba48f32a7.a) swap on sd0b dump on sd0b inteldrm0: 1440x900, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd1 wskbd0: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wskbd3: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) bwfm0: address c4:b3:01:c6:20:5f umodem0 at uhub4 port 1 configuration 1 interface 0 "Dygma Raise" rev 2.00/1.00 addr 19 umodem0: data interface 1, has no CM over data, has break umodem0: status change notification available ucom1 at umodem0: usb0.1.00144.1 uhidev8 at uhub4 port 1 configuration 1 interface 2 "Dygma Raise" rev 2.00/1.00 addr 19 uhidev8: iclass 3/0, 8 report ids ums2 at uhidev8 reportid 1: 8 buttons, Z and W dir wsmouse3 at ums2 mux 0 ucc2 at uhidev8 reportid 4: 1024 usages, 20 keys, array wskbd4 at ucc2 mux 1 wskbd4: connecting to wsdisplay0 uhid7 at uhidev8 reportid 5: input=1, output=0, feature=0 ukbd3 at uhidev8 reportid 8: 128 variable keys, 0 key codes wskbd5 at ukbd3 mux 1 wskbd5: connecting to wsdisplay0 uhidev9 at uhub4 port 1 configuration 1 interface 3 "Dygma Raise" rev 2.00/1.00 addr 19 uhidev9: no report descriptor uhidev10 at uhub4 port 2 configuration 1 interface 0 "Kensington Kensington Eagle Trackball" rev 2.00/1.20 addr 20 uhidev10: iclass 3/1 ums3 at uhidev10: 5 buttons, Z dir wsmouse4 at ums3 mux 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 ukspan0: unexpected baud: 0 usbd_transfer: has old buffer! usb_insert_transfer: xfer=0xfffffd826e46a698 not free ukspan0: control xfer failed usbd_transfer: has old buffer! usb_insert_transfer: xfer=0xfffffd826e46a698 not free ukspan0: control xfer failed usbd_transfer: has old buffer! usb_insert_transfer: xfer=0xfffffd826e46a698 not free ukspan0: control xfer failed usbd_transfer: has old buffer! usb_insert_transfer: xfer=0xfffffd826e46a698 not free ukspan0: control xfer failed usbd_transfer: has old buffer! usb_insert_transfer: xfer=0xfffffd826e46a698 not free ukspan0: control xfer failed ukspan0: ixfer failed ucom0 detached ukspan0 detached ukspan0 at uhub0 port 2 "Keyspan, a division of InnoSys Inc. Keyspan USA-19H" rev 1.10/1.00 addr 10 ucom0 at ukspan0: usb0.0.00002.0 ukspan0: ixfer failed ucom0 detached ukspan0 detached uid 32767 on /tmp: file system full audio1 detached uaudio0 detached uhid0 detached uhidpp0 detached uhid1 detached uhidev0 detached uaudio0 at uhub1 port 1 configuration 1 interface 1 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 4 ctls audio1 at uaudio0 uhidev0 at uhub1 port 1 configuration 1 interface 3 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uhidev0: iclass 3/0, 18 report ids uhidpp0 at uhidev0 uhid0 at uhidev0 reportid 1: input=63, output=63, feature=63 uhid1 at uhidev0 reportid 18: input=63, output=63, feature=0 syncing disks... done bwfm0: flowring not closing rebooting... OpenBSD 7.4 (GENERIC.MP) #1397: Tue Oct 10 09:02:37 MDT 2023 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8469352448 (8077MB) avail mem = 8192929792 (7813MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x8afac000 (33 entries) bios0: vendor Apple Inc. version "195.0.0.0.0" date 06/11/2020 bios0: Apple Inc. MacBookAir7,2 efi0 at bios0: UEFI 1.1 acpi0 at bios0: ACPI 5.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT DMAR MCFG acpi0: wakeup devices PEG0(S3) EC__(S3) HDEF(S3) RP01(S3) RP02(S3) RP03(S4) ARPT(S4) RP05(S3) RP06(S3) SPIT(S3) XHC1(S3) ADP1(S3) LID0(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 2100.02 MHz, 06-3d-04, patch 0000002f cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 100MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 2100.03 MHz, 06-3d-04, patch 0000002f cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 2100.04 MHz, 06-3d-04, patch 0000002f cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 2100.07 MHz, 06-3d-04, patch 0000002f cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins acpiec0 at acpi0 acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-155 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus 5 (RP05) acpiprt6 at acpi0: bus 4 (RP06) acpisbs0 at acpi0: SBS0 model "A1405" serial 8 type LION oem "iFixit" acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001 acpicmos0 at acpi0 asmc0 at acpi0: SMC_ (smc-huronriver) addr 0x300/0x20: rev 2.27f627, 612 keys "ACPI0008" at acpi0 not configured "ACPI0001" at acpi0 not configured "APP000D" at acpi0 not configured acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0(wakeup) acpibtn1 at acpi0: PWRB abl0 at acpi0: PNLF (backlight) acpibtn2 at acpi0: SLPB acpicpu0 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpivideo0 at acpi0: IGPU acpivout0 at acpivideo0: DD01 cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 2100 MHz: speeds: 2201, 2200, 2100, 1800, 1600, 1300, 1100, 900, 700, 500 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 6000" rev 0x09 drm0 at inteldrm0 inteldrm0: msi, BROADWELL, gen 8 azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi azalia0: No codecs found xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 9 Series DMA" rev 0x03 at pci0 dev 21 function 0 not configured "Intel 9 Series SPI" rev 0x03 at pci0 dev 21 function 4 not configured "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi azalia1: codecs: Cirrus Logic CS4208 audio0 at azalia1 ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi pci2 at ppb1 bus 2 "Broadcom BCM15700A2" rev 0x00 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi pci3 at ppb2 bus 3 bwfm0 at pci3 dev 0 function 0 "Broadcom BCM43602" rev 0x01: msi ppb3 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi pci4 at ppb3 bus 5 ppb4 at pci4 dev 0 function 0 vendor "Intel", unknown product 0x156b rev 0x00 pci5 at ppb4 bus 6 ppb5 at pci5 dev 0 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci6 at ppb5 bus 7 vendor "Intel", unknown product 0x156a (class system subclass miscellaneous, rev 0x00) at pci6 dev 0 function 0 not configured ppb6 at pci5 dev 3 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci7 at ppb6 bus 8 ppb7 at pci5 dev 4 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci8 at ppb7 bus 57 ppb8 at pci5 dev 5 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci9 at ppb8 bus 106 ppb9 at pci5 dev 6 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci10 at ppb9 bus 107 ppb10 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi pci11 at ppb10 bus 4 nvme0 at pci11 dev 0 function 0 "Samsung SM981/PM981 NVMe" rev 0x00: msix, NVMe 1.3 nvme0: Samsung SSD 970 EVO Plus 500GB, firmware 2B2QEXM7, serial S58SNM0T605601L scsibus1 at nvme0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 2B2Q> sd0: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 iic0: addr 0x2c 03=fc 05=6c 06=c0 71=06 72=80 86=73 90=37 91=27 92=24 93=3d 94=41 95=3c 96=69 97=86 98=22 99=1f 9a=84 9f=7c a0=7f a1=b5 a2=bf a3=7b a4=28 a5=cf a6=64 a7=2d words 00=0000 01=0000 02=00fc 03=fc00 04=006c 05=6cc0 06=c000 07=0000 pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 isa0 at pcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhub1 at uhub0 port 1 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/0.01 addr 2 uaudio0 at uhub1 port 1 configuration 1 interface 1 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 4 ctls audio1 at uaudio0 uhidev0 at uhub1 port 1 configuration 1 interface 3 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uhidev0: iclass 3/0, 18 report ids uhidpp0 at uhidev0 uhid0 at uhidev0 reportid 1: input=63, output=63, feature=63 uhid1 at uhidev0 reportid 18: input=63, output=63, feature=0 umass0 at uhub1 port 2 configuration 1 interface 0 "Hitachi-LG Data Storage Inc Portable Super Multi Drive" rev 2.00/0.00 addr 4 umass0: using ATAPI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 cd0 at scsibus2 targ 1 lun 0: <HL-DT-ST, DVDRAM GP60NB50, PE00> removable uhidev1 at uhub1 port 3 configuration 1 interface 0 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev1: iclass 3/1 ums0 at uhidev1: 16 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev2 at uhub1 port 3 configuration 1 interface 1 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev2: iclass 3/0 uhid2 at uhidev2: input=64, output=64, feature=0 uhidev3 at uhub1 port 3 configuration 1 interface 2 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev3: iclass 3/0, 4 report ids uhid3 at uhidev3 reportid 1: input=1, output=0, feature=0 ucc0 at uhidev3 reportid 2: 18 usages, 13 keys, enum wskbd0 at ucc0 mux 1 ukbd0 at uhidev3 reportid 4: no usable key codes array uhub2 at uhub1 port 4 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/0.01 addr 6 uvideo0 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech Webcam C925e" rev 2.00/0.16 addr 7 video0 at uvideo0 uaudio1 at uhub2 port 1 configuration 1 interface 3 "Logitech Logitech Webcam C925e" rev 2.00/0.16 addr 7 uaudio1: class v1, high-speed, sync, channels: 0 play, 2 rec, 2 ctls audio2 at uaudio1 axe0 at uhub2 port 2 configuration 1 interface 0 "Apple Computer Ethernet A1277" rev 2.00/0.01 addr 8 axe0: AX88772, address 08:6d:41:e4:58:f7 ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0006 uhub3 at uhub2 port 3 configuration 1 interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/6.63 addr 9 uhub4 at uhub2 port 4 configuration 1 interface 0 "Alcor Micro product 0x6254" rev 2.00/1.00 addr 10 uhidev4 at uhub0 port 3 configuration 1 interface 0 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 11 uhidev4: iclass 3/1, 1 report id ukbd1 at uhidev4 reportid 1: 8 variable keys, 6 key codes wskbd1 at ukbd1: console keyboard uhidev5 at uhub0 port 3 configuration 1 interface 1 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 11 uhidev5: iclass 3/1, 2 report ids ums1 at uhidev5 reportid 2: 3 buttons wsmouse1 at ums1 mux 0 ugen0 at uhub0 port 3 configuration 1 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 11 uhidev6 at uhub0 port 5 configuration 1 interface 0 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 12 uhidev6: iclass 3/0, 63 report ids uhid4 at uhidev6 reportid 63: input=64, output=0, feature=0 uhidev7 at uhub0 port 5 configuration 1 interface 1 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 12 uhidev7: iclass 3/1, 82 report ids ukbd2 at uhidev7 reportid 1: 8 variable keys, 6 key codes, country code 33 wskbd2 at ukbd2 mux 1 uhid5 at uhidev7 reportid 9: input=0, output=0, feature=3 uhid6 at uhidev7 reportid 63: input=64, output=0, feature=0 ucc1 at uhidev7 reportid 82: 5 usages, 3 keys, enum wskbd3 at ucc1 mux 1 ubcmtp0 at uhub0 port 5 configuration 1 interface 2 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 12 wsmouse2 at ubcmtp0 mux 0 uhub5 at uhub0 port 12 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/0.01 addr 13 uhub6 at uhub5 port 4 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/0.01 addr 14 uhub7 at uhub6 port 3 configuration 1 interface 0 "GenesysLogic USB3.1 Hub" rev 3.20/6.63 addr 15 umass1 at uhub7 port 2 configuration 1 interface 0 "Seagate Expansion HDD" rev 3.20/19.01 addr 16 umass1: using SCSI over Bulk-Only scsibus3 at umass1: 2 targets, initiator 0 sd1 at scsibus3 targ 1 lun 0: <Seagate, Expansion HDD, 1901> serial.0bc220360000NAC5RGDC sd1: 1907729MB, 512 bytes/sector, 3907029167 sectors umass2 at uhub0 port 14 configuration 1 interface 0 "Apple Card Reader" rev 3.00/8.20 addr 17 umass2: using SCSI over Bulk-Only scsibus4 at umass2: 2 targets, initiator 0 sd2 at scsibus4 targ 1 lun 0: <APPLE, SD Card Reader, 3.00> removable serial.05ac8406000000000820 vscsi0 at root scsibus5 at vscsi0: 256 targets softraid0 at root scsibus6 at softraid0: 256 targets root on sd0a (e8e1929ba48f32a7.a) swap on sd0b dump on sd0b inteldrm0: 1440x900, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd1 wskbd0: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wskbd3: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) bwfm0: address c4:b3:01:c6:20:5f umodem0 at uhub4 port 1 configuration 1 interface 0 "Dygma Raise" rev 2.00/1.00 addr 18 umodem0: data interface 1, has no CM over data, has break umodem0: status change notification available ucom0 at umodem0: usb0.1.00144.1 uhidev8 at uhub4 port 1 configuration 1 interface 2 "Dygma Raise" rev 2.00/1.00 addr 18 uhidev8: iclass 3/0, 8 report ids ums2 at uhidev8 reportid 1: 8 buttons, Z and W dir wsmouse3 at ums2 mux 0 ucc2 at uhidev8 reportid 4: 1024 usages, 20 keys, array wskbd4 at ucc2 mux 1 wskbd4: connecting to wsdisplay0 uhid7 at uhidev8 reportid 5: input=1, output=0, feature=0 ukbd3 at uhidev8 reportid 8: 128 variable keys, 0 key codes wskbd5 at ukbd3 mux 1 wskbd5: connecting to wsdisplay0 uhidev9 at uhub4 port 1 configuration 1 interface 3 "Dygma Raise" rev 2.00/1.00 addr 18 uhidev9: no report descriptor uhidev10 at uhub4 port 2 configuration 1 interface 0 "Kensington Kensington Eagle Trackball" rev 2.00/1.20 addr 19 uhidev10: iclass 3/1 ums3 at uhidev10: 5 buttons, Z dir wsmouse4 at ums3 mux 0 audio1 detached uaudio0 detached uhid0 detached uhidpp0 detached uhid1 detached uhidev0 detached uaudio0 at uhub1 port 1 configuration 1 interface 1 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 4 ctls audio1 at uaudio0 uhidev0 at uhub1 port 1 configuration 1 interface 3 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uhidev0: iclass 3/0, 18 report ids uhidpp0 at uhidev0 uhid0 at uhidev0 reportid 1: input=63, output=63, feature=63 uhid1 at uhidev0 reportid 18: input=63, output=63, feature=0 syncing disks... done bwfm0: flowring not closing rebooting... OpenBSD 7.4 (GENERIC.MP) #1397: Tue Oct 10 09:02:37 MDT 2023 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 8469352448 (8077MB) avail mem = 8192942080 (7813MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x8afac000 (33 entries) bios0: vendor Apple Inc. version "195.0.0.0.0" date 06/11/2020 bios0: Apple Inc. MacBookAir7,2 efi0 at bios0: UEFI 1.1 acpi0 at bios0: ACPI 5.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT DMAR MCFG acpi0: wakeup devices PEG0(S3) EC__(S3) HDEF(S3) RP01(S3) RP02(S3) RP03(S4) ARPT(S4) RP05(S3) RP06(S3) SPIT(S3) XHC1(S3) ADP1(S3) LID0(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 2100.02 MHz, 06-3d-04, patch 0000002f cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 100MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 2100.03 MHz, 06-3d-04, patch 0000002f cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 2100.06 MHz, 06-3d-04, patch 0000002f cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu2: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i7-5650U CPU @ 2.20GHz, 2100.06 MHz, 06-3d-04, patch 0000002f cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu3: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins acpiec0 at acpi0 acpimcfg0 at acpi0 acpimcfg0: addr 0xe0000000, bus 0-155 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG0) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus 3 (RP03) acpiprt5 at acpi0: bus 5 (RP05) acpiprt6 at acpi0: bus 4 (RP06) acpisbs0 at acpi0: SBS0 model "A1405" serial 8 type LION oem "iFixit" acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001 acpicmos0 at acpi0 asmc0 at acpi0: SMC_ (smc-huronriver) addr 0x300/0x20: rev 2.27f627, 612 keys "ACPI0008" at acpi0 not configured "ACPI0001" at acpi0 not configured "APP000D" at acpi0 not configured acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: LID0(wakeup) acpibtn1 at acpi0: PWRB abl0 at acpi0: PNLF (backlight) acpibtn2 at acpi0: SLPB acpicpu0 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu2 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpicpu3 at acpi0: C3(200@530 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS acpivideo0 at acpi0: IGPU acpivout0 at acpivideo0: DD01 cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 2100 MHz: speeds: 2201, 2200, 2100, 1800, 1600, 1300, 1100, 900, 700, 500 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 6000" rev 0x09 drm0 at inteldrm0 inteldrm0: msi, BROADWELL, gen 8 azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi azalia0: No codecs found xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 9 Series DMA" rev 0x03 at pci0 dev 21 function 0 not configured "Intel 9 Series SPI" rev 0x03 at pci0 dev 21 function 4 not configured "Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi azalia1: codecs: Cirrus Logic CS4208 audio0 at azalia1 ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3 pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi pci2 at ppb1 bus 2 "Broadcom BCM15700A2" rev 0x00 at pci2 dev 0 function 0 not configured ppb2 at pci0 dev 28 function 2 "Intel 9 Series PCIE" rev 0xe3: msi pci3 at ppb2 bus 3 bwfm0 at pci3 dev 0 function 0 "Broadcom BCM43602" rev 0x01: msi ppb3 at pci0 dev 28 function 4 "Intel 9 Series PCIE" rev 0xe3: msi pci4 at ppb3 bus 5 ppb4 at pci4 dev 0 function 0 vendor "Intel", unknown product 0x156b rev 0x00 pci5 at ppb4 bus 6 ppb5 at pci5 dev 0 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci6 at ppb5 bus 7 vendor "Intel", unknown product 0x156a (class system subclass miscellaneous, rev 0x00) at pci6 dev 0 function 0 not configured ppb6 at pci5 dev 3 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci7 at ppb6 bus 8 ppb7 at pci5 dev 4 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci8 at ppb7 bus 57 ppb8 at pci5 dev 5 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci9 at ppb8 bus 106 ppb9 at pci5 dev 6 function 0 vendor "Intel", unknown product 0x156b rev 0x00: msi pci10 at ppb9 bus 107 ppb10 at pci0 dev 28 function 5 "Intel 9 Series PCIE" rev 0xe3: msi pci11 at ppb10 bus 4 nvme0 at pci11 dev 0 function 0 "Samsung SM981/PM981 NVMe" rev 0x00: msix, NVMe 1.3 nvme0: Samsung SSD 970 EVO Plus 500GB, firmware 2B2QEXM7, serial S58SNM0T605601L scsibus1 at nvme0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <NVMe, Samsung SSD 970, 2B2Q> sd0: 476940MB, 512 bytes/sector, 976773168 sectors pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03 ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18 iic0 at ichiic0 iic0: addr 0x2c 03=fc 05=6c 06=a0 71=06 72=80 86=73 90=37 91=27 92=24 93=3d 94=41 95=3c 96=69 97=86 98=22 99=1f 9a=84 9f=7c a0=7f a1=b5 a2=bf a3=7b a4=28 a5=cf a6=64 a7=2d words 00=0000 01=0000 02=00fc 03=fc00 04=006c 05=6cc0 06=c000 07=0000 pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03 isa0 at pcib0 isadma0 at isa0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT efifb at mainbus0 not configured uhub1 at uhub0 port 1 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/0.01 addr 2 uaudio0 at uhub1 port 1 configuration 1 interface 1 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uaudio0: class v1, full-speed, sync, channels: 2 play, 2 rec, 4 ctls audio1 at uaudio0 uhidev0 at uhub1 port 1 configuration 1 interface 3 "Blue Microphones Yeti X" rev 2.00/b.03 addr 3 uhidev0: iclass 3/0, 18 report ids uhidpp0 at uhidev0 uhid0 at uhidev0 reportid 1: input=63, output=63, feature=63 uhid1 at uhidev0 reportid 18: input=63, output=63, feature=0 umass0 at uhub1 port 2 configuration 1 interface 0 "Hitachi-LG Data Storage Inc Portable Super Multi Drive" rev 2.00/0.00 addr 4 umass0: using ATAPI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 cd0 at scsibus2 targ 1 lun 0: <HL-DT-ST, DVDRAM GP60NB50, PE00> removable uhidev1 at uhub1 port 3 configuration 1 interface 0 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev1: iclass 3/1 ums0 at uhidev1: 16 buttons, Z and W dir wsmouse0 at ums0 mux 0 uhidev2 at uhub1 port 3 configuration 1 interface 1 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev2: iclass 3/0 uhid2 at uhidev2: input=64, output=64, feature=0 uhidev3 at uhub1 port 3 configuration 1 interface 2 "Cooler Master Technology Inc. MM710 Gaming Mouse" rev 2.00/1.10 addr 5 uhidev3: iclass 3/0, 4 report ids uhid3 at uhidev3 reportid 1: input=1, output=0, feature=0 ucc0 at uhidev3 reportid 2: 18 usages, 13 keys, enum wskbd0 at ucc0 mux 1 ukbd0 at uhidev3 reportid 4: no usable key codes array uhub2 at uhub1 port 4 configuration 1 interface 0 "Generic USB2.1 Hub" rev 2.10/0.01 addr 6 uvideo0 at uhub2 port 1 configuration 1 interface 0 "Logitech Logitech Webcam C925e" rev 2.00/0.16 addr 7 video0 at uvideo0 uaudio1 at uhub2 port 1 configuration 1 interface 3 "Logitech Logitech Webcam C925e" rev 2.00/0.16 addr 7 uaudio1: class v1, high-speed, sync, channels: 0 play, 2 rec, 2 ctls audio2 at uaudio1 axe0 at uhub2 port 2 configuration 1 interface 0 "Apple Computer Ethernet A1277" rev 2.00/0.01 addr 8 axe0: AX88772, address 08:6d:41:e4:58:f7 ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0006 uhub3 at uhub2 port 3 configuration 1 interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/6.63 addr 9 uhub4 at uhub2 port 4 configuration 1 interface 0 "Alcor Micro product 0x6254" rev 2.00/1.00 addr 10 uhidev4 at uhub0 port 3 configuration 1 interface 0 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 11 uhidev4: iclass 3/1, 1 report id ukbd1 at uhidev4 reportid 1: 8 variable keys, 6 key codes wskbd1 at ukbd1: console keyboard uhidev5 at uhub0 port 3 configuration 1 interface 1 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 11 uhidev5: iclass 3/1, 2 report ids ums1 at uhidev5 reportid 2: 3 buttons wsmouse1 at ums1 mux 0 ugen0 at uhub0 port 3 configuration 1 "Broadcom Corp. Bluetooth USB Host Controller" rev 2.01/1.69 addr 11 uhidev6 at uhub0 port 5 configuration 1 interface 0 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 12 uhidev6: iclass 3/0, 63 report ids uhid4 at uhidev6 reportid 63: input=64, output=0, feature=0 uhidev7 at uhub0 port 5 configuration 1 interface 1 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 12 uhidev7: iclass 3/1, 82 report ids ukbd2 at uhidev7 reportid 1: 8 variable keys, 6 key codes, country code 33 wskbd2 at ukbd2 mux 1 uhid5 at uhidev7 reportid 9: input=0, output=0, feature=3 uhid6 at uhidev7 reportid 63: input=64, output=0, feature=0 ucc1 at uhidev7 reportid 82: 5 usages, 3 keys, enum wskbd3 at ucc1 mux 1 ubcmtp0 at uhub0 port 5 configuration 1 interface 2 "Apple Inc. Apple Internal Keyboard / Trackpad" rev 2.00/1.71 addr 12 wsmouse2 at ubcmtp0 mux 0 uhub5 at uhub0 port 12 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/0.01 addr 13 uhub6 at uhub5 port 4 configuration 1 interface 0 "Generic USB3.2 Hub" rev 3.20/0.01 addr 14 uhub7 at uhub6 port 3 configuration 1 interface 0 "GenesysLogic USB3.1 Hub" rev 3.20/6.63 addr 15 umass1 at uhub7 port 2 configuration 1 interface 0 "Seagate Expansion HDD" rev 3.20/19.01 addr 16 umass1: using SCSI over Bulk-Only scsibus3 at umass1: 2 targets, initiator 0 sd1 at scsibus3 targ 1 lun 0: <Seagate, Expansion HDD, 1901> serial.0bc220360000NAC5RGDC sd1: 1907729MB, 512 bytes/sector, 3907029167 sectors umass2 at uhub0 port 14 configuration 1 interface 0 "Apple Card Reader" rev 3.00/8.20 addr 17 umass2: using SCSI over Bulk-Only scsibus4 at umass2: 2 targets, initiator 0 sd2 at scsibus4 targ 1 lun 0: <APPLE, SD Card Reader, 3.00> removable serial.05ac8406000000000820 vscsi0 at root scsibus5 at vscsi0: 256 targets softraid0 at root scsibus6 at softraid0: 256 targets root on sd0a (e8e1929ba48f32a7.a) swap on sd0b dump on sd0b inteldrm0: 1440x900, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd1 wskbd0: connecting to wsdisplay0 wskbd2: connecting to wsdisplay0 wskbd3: connecting to wsdisplay0 wsdisplay0: screen 1-5 added (std, vt100 emulation) bwfm0: address c4:b3:01:c6:20:5f umodem0 at uhub4 port 1 configuration 1 interface 0 "Dygma Raise" rev 2.00/1.00 addr 18 umodem0: data interface 1, has no CM over data, has break umodem0: status change notification available ucom0 at umodem0: usb0.1.00144.1 uhidev8 at uhub4 port 1 configuration 1 interface 2 "Dygma Raise" rev 2.00/1.00 addr 18 uhidev8: iclass 3/0, 8 report ids ums2 at uhidev8 reportid 1: 8 buttons, Z and W dir wsmouse3 at ums2 mux 0 ucc2 at uhidev8 reportid 4: 1024 usages, 20 keys, array wskbd4 at ucc2 mux 1 wskbd4: connecting to wsdisplay0 uhid7 at uhidev8 reportid 5: input=1, output=0, feature=0 ukbd3 at uhidev8 reportid 8: 128 variable keys, 0 key codes wskbd5 at ukbd3 mux 1 wskbd5: connecting to wsdisplay0 uhidev9 at uhub4 port 1 configuration 1 interface 3 "Dygma Raise" rev 2.00/1.00 addr 18 uhidev9: no report descriptor uhidev10 at uhub4 port 2 configuration 1 interface 0 "Kensington Kensington Eagle Trackball" rev 2.00/1.20 addr 19 uhidev10: iclass 3/1 ums3 at uhidev10: 5 buttons, Z dir wsmouse4 at ums3 mux 0 drm:pid8484:drm_atomic_helper_wait_for_flip_done *ERROR* [drm] *ERROR* [CRTC:60:pipe B] flip_done timed out drm:pid8484:drm_atomic_helper_wait_for_flip_done *ERROR* [drm] *ERROR* [CRTC:60:pipe B] flip_done timed out ukspan0 at uhub3 port 3 "Keyspan, a division of InnoSys Inc. Keyspan USA-19H" rev 1.10/1.00 addr 20 ucom1 at ukspan0: usb0.1.00334.0 ukspan0: ixfer failed ucom1 detached ukspan0 detached ukspan0 at uhub3 port 3 "Keyspan, a division of InnoSys Inc. Keyspan USA-19H" rev 1.10/1.00 addr 20 ucom1 at ukspan0: usb0.1.00334.0 ukspan0: ixfer failed ucom1 detached ukspan0 detached ukspan0 at uhub3 port 3 "Keyspan, a division of InnoSys Inc. Keyspan USA-19H" rev 1.10/1.00 addr 20 ucom1 at ukspan0: usb0.1.00334.0 ukspan0: ixfer failed ucom1 detached ukspan0 detached ukspan0 at uhub3 port 3 "Keyspan, a division of InnoSys Inc. Keyspan USA-19H" rev 1.10/1.00 addr 20 ucom1 at ukspan0: usb0.1.00334.0 drm:pid8484:drm_atomic_helper_wait_for_flip_done *ERROR* [drm] *ERROR* [CRTC:60:pipe B] flip_done timed out ukspan0: ixfer failed ucom1 detached ukspan0 detached i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub i915_vma_coredump_create: stub pool_fini: stub drm:pid68847:__intel_engine_reset_bh *NOTICE* [drm] Resetting rcs0 for stopped heartbeat on rcs0 drm:pid8484:drm_atomic_helper_wait_for_flip_done *ERROR* [drm] *ERROR* [CRTC:60:pipe B] flip_done timed out drm:pid8484:drm_atomic_helper_wait_for_flip_done *ERROR* [drm] *ERROR* [CRTC:60:pipe B] flip_done timed out drm:pid8484:drm_atomic_helper_wait_for_flip_done *ERROR* [drm] *ERROR* [CRTC:60:pipe B] flip_done timed out drm:pid8484:drm_atomic_helper_wait_for_flip_done *ERROR* [drm] *ERROR* [CRTC:60:pipe B] flip_done timed out Controller /dev/usb0: addr 01: 8086:0000 Intel, xHCI root hub super speed, self powered, config 1, rev 1.00 driver: uhub0 addr 02: 0bda:5411 Generic, USB2.1 Hub high speed, self powered, config 1, rev 0.01 driver: uhub1 addr 03: 046d:0aaf Blue Microphones, Yeti X full speed, self powered, config 1, rev b.03, iSerial 2244SG0023G8_888-000313110306 driver: uaudio0 driver: uhidev0 addr 04: 0e8d:1887 Hitachi-LG Data Storage Inc, Portable Super Multi Drive high speed, power 500 mA, config 1, rev 0.00, iSerial KXZZ8L31558 driver: umass0 addr 05: 2516:012f Cooler Master Technology Inc., MM710 Gaming Mouse full speed, power 100 mA, config 1, rev 1.10 driver: uhidev1 driver: uhidev2 driver: uhidev3 addr 06: 0bda:5411 Generic, USB2.1 Hub high speed, self powered, config 1, rev 0.01 driver: uhub2 addr 07: 046d:085b Logitech, Logitech Webcam C925e high speed, power 500 mA, config 1, rev 0.16, iSerial B0175A9F driver: uvideo0 driver: uaudio1 addr 08: 05ac:1402 Apple Computer, Ethernet A1277 high speed, power 250 mA, config 1, rev 0.01 driver: axe0 addr 09: 05e3:0610 GenesysLogic, USB2.1 Hub high speed, self powered, config 1, rev 6.63 driver: uhub3 addr 10: 058f:6254 Alcor Micro, product 0x6254 high speed, self powered, config 1, rev 1.00 driver: uhub4 addr 11: 05ac:8290 Broadcom Corp., Bluetooth USB Host Controller full speed, self powered, config 1, rev 1.69 driver: uhidev4 driver: uhidev5 driver: ugen0 addr 12: 05ac:0291 Apple Inc., Apple Internal Keyboard / Trackpad full speed, power 500 mA, config 1, rev 1.71, iSerial FM761340EE1G6LMA173 driver: uhidev6 driver: uhidev7 driver: ubcmtp0 addr 13: 0bda:0411 Generic, USB3.2 Hub super speed, self powered, config 1, rev 0.01 driver: uhub5 addr 14: 0bda:0411 Generic, USB3.2 Hub super speed, self powered, config 1, rev 0.01 driver: uhub6 addr 15: 05e3:0626 GenesysLogic, USB3.1 Hub super speed, self powered, config 1, rev 6.63 driver: uhub7 addr 16: 0bc2:2036 Seagate, Expansion HDD super speed, power 224 mA, config 1, rev 19.01, iSerial 00000000NAC5RGDC driver: umass1 addr 17: 05ac:8406 Apple, Card Reader super speed, power 224 mA, config 1, rev 8.20, iSerial 000000000820 driver: umass2 addr 18: 1209:2201 Dygma, Raise full speed, power 500 mA, config 1, rev 1.00, iSerial 161E01F950535254352E3120FF14312CraiseD driver: umodem0 driver: uhidev8 driver: uhidev9 addr 19: 047d:2048 Kensington, Kensington Eagle Trackball low speed, power 100 mA, config 1, rev 1.20 driver: uhidev10
