Hi All,
I created to softraid0 drives, following the FAQ.
ALl seems to be working without problems, however bioctl isn’t able to
“see” the softraid0 drives, sd5 and sd6.
root@epyc1:~ # dmesg | egrep 'sd([0-6])'
sd0 at scsibus1 targ 0 lun 0: <ATA, DELLBOSS VD, MV.R>
t10.ATA_DELLBOSS_VD_37b61d1b1f560010_
sd0: 457798MB, 512 bytes/sector, 937571968 sectors, thin
sd1 at scsibus2 targ 1 lun 0: <NVMe, INTEL SSDPE2KX08, VDV1>
sd1: 7630885MB, 512 bytes/sector, 15628053168 sectors
sd2 at scsibus3 targ 1 lun 0: <NVMe, INTEL SSDPE2KX08, VDV1>
sd2: 7630885MB, 512 bytes/sector, 15628053168 sectors
sd3 at scsibus6 targ 1 lun 0: <NVMe, INTEL SSDPE2KX08, VDV1>
sd3: 7630885MB, 512 bytes/sector, 15628053168 sectors
sd4 at scsibus7 targ 1 lun 0: <NVMe, INTEL SSDPE2KX08, VDV1>
sd4: 7630885MB, 512 bytes/sector, 15628053168 sectors
sd5 at scsibus9 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd5: 7630625MB, 512 bytes/sector, 15627520063 sectors
sd6 at scsibus9 targ 2 lun 0: <OPENBSD, SR RAID 1, 006>
sd6: 7630625MB, 512 bytes/sector, 15627520063 sectors
root on sd0a (964c4608967fd9ca.a) swap on sd0b dump on sd0b
root@epyc1:~ # for i in $(jot 7 0); do bioctl sd${i}; done
sd0: <ATA, DELLBOSS VD, MV.R>, serial 37b61d1b1f560010
sd1: <NVMe, INTEL SSDPE2KX08, VDV1>, serial (unknown)
sd2: <NVMe, INTEL SSDPE2KX08, VDV1>, serial (unknown)
sd3: <NVMe, INTEL SSDPE2KX08, VDV1>, serial (unknown)
sd4: <NVMe, INTEL SSDPE2KX08, VDV1>, serial (unknown)
bioctl: Can't locate sd5 device via /dev/bio
bioctl: Can't locate sd6 device via /dev/bio
root@epyc1:~ # df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/sd0a 986M 107M 830M 12% /
/dev/sd0l 277G 192K 263G 1% /home
/dev/sd0d 3.9G 10.0K 3.7G 1% /tmp
/dev/sd0f 29.1G 1.3G 26.3G 5% /usr
/dev/sd0g 986M 288M 648M 31% /usr/X11R6
/dev/sd0h 19.4G 23.8M 18.4G 1% /usr/local
/dev/sd0k 5.8G 2.0K 5.5G 1% /usr/obj
/dev/sd0j 2.9G 2.0K 2.8G 1% /usr/src
/dev/sd5c 7.0T 367G 6.3T 6% /var
/dev/sd6c 7.0T 670G 6.0T 10% /var/data
Any idea?
Mischa
