Daniel Jakots:
> /etc# head -n 20 hostname.*
> ==> hostname.em0 <==
> up
>
> ==> hostname.pppoe0 <==
> inet 0.0.0.0 255.255.255.255 0.0.0.1 pppoedev vlan40 authproto pap \
> authname 'user' authkey 'password' \
> up
> !/sbin/route add default -ifp pppoe0 0.0.0.1
>
> ==> hostname.vlan40 <==
> vnetid 40 parent em0
> #llprio 0
> #txprio 0
In my broadly similar configuration at home, I have a final "up" in
hostname.vlanXX and...
> vlan40: flags=8102<BROADCAST,PROMISC,MULTICAST> mtu 1500
> lladdr 3c:97:0e:33:0b:1e
> index 11 priority 0 llprio 3
> encap: vnetid 40 parent em0 txprio packet rxprio outer
> groups: vlan
> media: Ethernet autoselect (1000baseT full-duplex)
> status: active
... I see your vlan interface is not UP.
Also, your address configuration in hostname pppoe0 doesn't look
correct. Note that hostname.if(5) "inet" lines have a different
syntax from ifconfig(8). I suggest:
==> hostname.pppoe0 <==
inet 0.0.0.0 255.255.255.255 NONE pppoedev vlan40 authproto pap \
authname 'user' authkey 'password' \
up
dest 0.0.0.1
!/sbin/route add default -ifp pppoe0 0.0.0.1
--
Christian "naddy" Weisgerber [email protected]
