On 10/6/25 03:22, Denis Fondras wrote:
Hello,Since I upgraded to a recent snapshot (OpenBSD rt-grav-02 7.8 GENERIC.MP#45 amd64) later last week, one of my ixl interface goes OACTIVE every few hour and my BGP peering goes down with holdtimer expired (don't know if that's related though). ixl3: flags=8c43<UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1500 lladdr 00:00:00:00:01:03 index 8 priority 0 llprio 3 media: Ethernet autoselect (10GbaseLR full-duplex) status: active inet6 fe80::200:ff:fe00:103%ixl3 prefixlen 64 scopeid 0x8 inet6 2001:7f8:xxxx prefixlen 64 inet 185.xxxx netmask 0xffffff00 broadcast 185.xxxx Any idea what can be wrong ? Only ixl3 exhibits this behaviour, ixl0-2 seems fine. syslog only shows the holdtimer expired. I can try to upgrade though the timing is really unfortunate as my second OpenBSD router (same version, same hardware) is under maintenance :D Denis
I'm curious if a snapshot from Sept 18 or before shows this issue. I have a machine that runs properly for just a minute or two before an ixl interface fails to communicate. I have no idea what OACTIVE is indicating, but my machine (running an older snapshot) does not show this and works fine, my machine running snapshots Sept 28 fails and later. (unfortunately, there is a gap in the amd64 snapshots between Sept 18 and Sept 28, so I can't narrow it down more). I submitted a bug report earlier today. Nick.
