Hello!
I want to try OpenBSD. For this I have bought Orange Pi PC2. Before
buying I checked supported hardware list:
https://www.openbsd.org/arm64.html
I read INSTALL.arm64 file. I'm tried to do with SD card:
$ dd if=miniroot77.img of=/dev/sdc1 bs=1m
$ dd if=/usr/share/uboot/orangepi_pc2/u-boot-sunxi-with-spl.bin \
of=/dev/sdc bs=1024 seek=8h
The result:
$ fdisk -l
Disk /dev/sdc: 7.51 GiB, 8068792320 bytes, 15759360 sectors
Disk model: Mass-Storage
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
/dev/sdc1 * 32768 49151 16384 8M c W95 FAT32 (LBA)
/dev/sdc4 49152 88063 38912 19M a6 OpenBSD
After that I am plugging SD card in Orange Pi PC2 and... Nothing!
With official SD card after plug power cable, red led turns on. Then
when I press the power switch the red led turns off and the green led
turns on and a system starts. When I plug SD card with OpenBSD, all leds
are off. There's no light. I've tried several SD cards -- the same
problem. What am I doing wrong?
