On 4/1/06, Bachman Kharazmi <[EMAIL PROTECTED]> wrote:
> Do you have any possibility to debug the freeze using a null-modem
> cable and redirect all output from boot> to serial?
> This can be done with a serial cable and by typing:
> "set tty com0" at bootprompt.
>
> I'm afraid your worst problem is that your lappy don't have com port..
> /bkw
it has one.
> On 31/03/06, Peter Bako <[EMAIL PROTECTED]> wrote:
> > read the battery status, it simply was not able to do so. I figured the
> > problem had to do with the older BIOS on the laptop, so I download and
> > installed the latest version from the HP web site. The new BIOS now has a
> > battery info page whereas it did not before.
> >
> > This is where things get fun... I tried to boot up my system but OpenBSD
> > crashed almost immediately after the initial boot prompt. Obviously I
> > figured that the BIOS update had something to do with it, but as a test I
> > tried to boot with single user mode - still crashed.
I have an HP NC6000 I would be more than happy to reproduce the
problem with and record over a serial cable -- * if I could only get
the same BIOS upgrade that Peter used * --. I traded two emails with
him and he failed to see the importance of linking me to the bios
upgrade he used.
Otherwise its seems to be booting OpenBSD cd38.iso just fine, full
dmesg below for those interested:
>> OpenBSD/i386 CDBOOT 1.04
boot> boot
booting cd0a:/3.8/i386/bsd.rd: 4369156+828044
[52+151072+137381]=0x53b600
entry point at 0x100120
.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 3.8 (RAMDISK_CD) #794: Sat Sep 10 15:58:32 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) M processor 1400MHz ("GenuineIntel"
686-class) 598 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem = 536256512 (523688K)
avail mem = 483438592 (472108K)
using 4278 buffers containing 26914816 bytes (26284K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c3) BIOS, date 09/16/03, BIOS32 rev. 0 @
0xf0000
apm0 at bios0: Power Management spec V1.2
apm0: flags 130102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0840/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4e50/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product
0x24cc
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10 NP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 10
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci2 at ppb1 bus 2
cbb0 at pci2 dev 6 function 0 "O2 Micro OZ711E0 CardBus" rev 0x00: irq
10
cbb1 at pci2 dev 6 function 1 "O2 Micro OZ711E0 CardBus" rev 0x00: irq
10
"O2 Micro OZ711Mx CardBus" rev 0x00 at pci2 dev 6 function 2 not
configured
cbb2 at pci2 dev 6 function 3 "O2 Micro OZ711E0 CardBus" rev 0x00: irq
10
bge0 at pci2 dev 14 function 0 "Broadcom BCM5705M_ALT" rev 0x03,
BCM5705 A3 (0x3003): irq 11 address 00:08:02:d8:xx:xx
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
cardslot2 at cbb2 slot 2 flags 0
cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20
pcmcia2 at cardslot2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4021GAS>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
"Intel 82801DB AC97" rev 0x03 at pci0 dev 31 function 5 not configured
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not
configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask f7cd netmask ffcd ttymask ffcf
rd0: fixed, 3800 blocks
wd0: no disk label
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell?
