Hi.
I was using for long the workaround of prefix 56 on an interface to make
IPv6 work in OVH. I tried today to make on-link setup work, but I fail to
figure out how, for IPv6.
I'm on -current.
# sysctl -n kern.version
OpenBSD 8.0-beta (GENERIC.MP) #51: Tue Jul 21 20:50:59 MDT 2026
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Here is my hostnname.if(5):
---8<---
inet xxx.xxx.xxx.aaa/32
!route -n add -inet -host xxx.xxx.xxx.254 -link -iface \$if
!route -n add -inet default xxx.xxx.xxx.254
inet6 zzzz:zzzz:zzz:zzdc::1 128
!route -n add -inet6 -host zzzz:zzzz:zzz:zzff:ff:ff:ff:ff -link -iface \$if
!route -n add -inet6 default zzzz:zzzz:zzz:zzff:ff:ff:ff:ff
up
--->8---
Above setup for IPv4 works, but for IPv6 doesn't. Execution looks successful:
# ifconfig ix0 -inet6
# sh /etc/netstart ix0
add host xxx.xxx.xxx.254: gateway ix0
add net default: gateway xxx.xxx.xxx.254
add host zzzz:zzzz:zzz:zzff:ff:ff:ff:ff: gateway ix0
add net default: gateway zzzz:zzzz:zzz:zzff:ff:ff:ff:ff
but it doesn't work:
# ping6 -n -c3 zzzz:zzzz:zzz:zzff:ff:ff:ff:ff
PING zzzz:zzzz:zzz:zzff:ff:ff:ff:ff (zzzz:zzzz:zzz:zzff:ff:ff:ff:ff): 56 data
bytes
ping6: sendmsg: Invalid argument
ping: wrote zzzz:zzzz:zzz:zzff:ff:ff:ff:ff 64 chars, ret=-1
ping6: sendmsg: Invalid argument
ping: wrote zzzz:zzzz:zzz:zzff:ff:ff:ff:ff 64 chars, ret=-1
ping6: sendmsg: Invalid argument
ping: wrote zzzz:zzzz:zzz:zzff:ff:ff:ff:ff 64 chars, ret=-1
--- zzzz:zzzz:zzz:zzff:ff:ff:ff:ff ping statistics ---
3 packets transmitted, 0 packets received, 100.0% packet loss
# ndp -na | grep ff:ff
zzzz:zzzz:zzz:zzff:ff:ff:ff:ff (incomplete) ix0 permanent R
What I am missing?
Please CC me with any replies as I'm not subscribed to misc.
--
Regards,
Mikolaj
