On Sat, Nov 7, 2026 at 10:31 PM <[email protected]> wrote:

> I had to power cycle to get it to reboot, and when it did boot, the
> initial line was:
>         boot> bsd.upgrade is not u+x
> and then it booted, but not into 8.0, but into 7.9.  The 7.9 system
> seems to be running fine.  All the files seem to be there, and the
> executables that I've tried, such as firefox, are running fine.
>

It's possible that you just need to retry the sysupgrade until it
successfully
manages to install bsd.upgrade with the correct permissions. You might
even try manually applying the u+x permissions to bsd.upgrade to see
what happens. Your proposed actions are all on the right track.

But you shouldn't have needed to do any of those things. This all should
have just worked. The fact that it did not is troubling.

bios0 at mainbus0: SMBIOS rev. 3.4 @ 0x6244f000 (84 entries)
> bios0: vendor Dell Inc. version "1.29.0" date 09/02/2024
> bios0: Dell Inc. OptiPlex 5090
> efi0 at bios0: UEFI 2.7
> efi0: Dell rev 0x10000
>

Sometimes an old BIOS can cause mysterious problems. I suggest you
update yours. I just checked the Dell website and they have a BIOS 1.45.0
update with "Critical" importance. Maybe it contains an important fix that
you need. At first glance it looks like you need to be running Windows to
install it but after scrolling down a bit I saw there's a way to apply BIOS
updates within the BIOS itself (without needing to boot into Windows).

-ken

Reply via email to