Hi, Bob Bostwick (Lists) wrote: > Anyone else get these errors with the nfe driver? Not really sure what > to do to troubleshoot the problem. This seems to happen during heavy > traffic times. > > nfe0: tx v1 error 0x6001 > nfe0: watchdog timeout > nfe0: tx v1 error 0x6001 > nfe0: tx v1 error 0x6001 >
yes, I get similar messages with nfe(4). In my case it's a couple of times "watchdog timeout" followed by a single "tx v1 error 0x6001" line. I get these messages always right after booting my machine. The nfe(4) interface begins working about 20 seconds after the initial login prompt appears (after or short before the tx v1 error 0x6001 line is shown), but after this deferred interface startup, all problems are gone. Just in case anybody wants to debug this issue, my dmesg is attached. regards, Andreas OpenBSD 3.9-current (GENERIC) #0: Mon Apr 24 18:35:45 CEST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: AMD Athlon(tm) XP 2600+ ("AuthenticAMD" 686-class, 512KB L2 cache) 1.93 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 536375296 (523804K) avail mem = 482365440 (471060K) using 4278 buffers containing 26923008 bytes (26292K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(6e) BIOS, date 07/17/03, BIOS32 rev. 0 @ 0xfb990 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 70102 dobusy 1 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd8e4 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd820/192 (10 entries) pcibios0: PCI Exclusive IRQs: 3 5 10 11 pcibios0: no compatible PCI ICU found pcibios0: Warning, unable to fix up PCI interrupt routing pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0xd000 0xd0000/0x1800 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "NVIDIA nForce2 PCI" rev 0xc1 "NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 1 not configured "NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 2 not configured "NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 3 not configured "NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 4 not configured "NVIDIA nForce2" rev 0xc1 at pci0 dev 0 function 5 not configured pcib0 at pci0 dev 1 function 0 "NVIDIA nForce2 ISA" rev 0xa3 nviic0 at pci0 dev 1 function 1 "NVIDIA nForce2 SMBus" rev 0xa2 iic0 at nviic0 iic0: addr 0x2f 04=00 06=02 07=00 0c=00 0d=07 0e=84 0f=00 10=ca 11=10 12=00 13=60 14=14 15=62 16=01 17=06 iic1 at nviic0 ohci0 at pci0 dev 2 function 0 "NVIDIA nForce2 USB" rev 0xa3: irq 11, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 2 function 1 "NVIDIA nForce2 USB" rev 0xa3: irq 3, version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0 at pci0 dev 2 function 2 "NVIDIA nForce2 USB" rev 0xa3: irq 5 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered nfe0 at pci0 dev 4 function 0 "NVIDIA nForce2 LAN" rev 0xa1: irq 11, address 00:0c:76:ff:b6:f0 icsphy0 at nfe0 phy 1: ICS1893 10/100 PHY, rev. 1 ppb0 at pci0 dev 8 function 0 "NVIDIA nForce2 PCI-PCI" rev 0xa3 pci1 at ppb0 bus 1 emu0 at pci1 dev 9 function 0 "Creative Labs SoundBlaster Live" rev 0x05: irq 10 ac97: codec id 0x83847609 (SigmaTel STAC9721/23) ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D audio0 at emu0 "Creative Labs PCI Gameport Joystick" rev 0x05 at pci1 dev 9 function 1 not configured pciide0 at pci0 dev 9 function 0 "NVIDIA nForce2 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <SAMSUNG SV1203N> wd0: 16-sector PIO, LBA48, 114498MB, 234493056 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 disabled (no drives) ppb1 at pci0 dev 30 function 0 "NVIDIA nForce2 AGP" rev 0xc1 pci2 at ppb1 bus 2 vga1 at pci2 dev 0 function 0 "ATI Radeon 9600 Pro" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) "ATI Radeon 9600 Pro Sec" rev 0x00 at pci2 dev 0 function 1 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 lm0 at isa0 port 0x290/8: W83627HF npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask eb6d netmask eb6d ttymask fbef pctr: user-level cycle counter enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 nfe0: watchdog timeout nfe0: watchdog timeout nfe0: watchdog timeout nfe0: tx v1 error 0x6001