On 5/4/06, Samurai Chef <[EMAIL PROTECTED]> wrote:
> Use the LSI Logic SCSI controller. That should help with getting it
installed.
>
>
That worked! Thank you :-)
> On 5/4/06, Murali Raju <[EMAIL PROTECTED]> wrote:
> > Still no Virtual SMP support for *BSD on ESX. Are running 2.5.3? I
> > can't seem to even get a normal OpenBSD install on ESX.
> >
> > Cheers..
> >
> > _Raju
> >
> > On 5/4/06, Craig Barraclough <[EMAIL PROTECTED]> wrote:
> > > Just thought I'd check it out again, to see if it MP under VMware now
works, unfortunately no.
> > > dmesg below is from bsd, not bsd.mp unfortunately.
> > >
> > > (Following is hand copied, 'cause I still haven't worked out how to
serial console a vmware machine).
> > >
> > > cpu1 failed to become ready
> > > Stopped at Debugger+0x4: leave
> > > ddb{0}> ps
> > > PID PPID PGRP UID S FLAGS WAIT
COMMAND
> > > 9 0 0 0 2 0x100204
crypto
> > > 8 0 0 0 2 0x100204
aiodoned
> > > 7 0 0 0 2 0x100204
update
> > > 6 0 0 0 2 0x100204
cleaner
> > > 5 0 0 0 2 0x100204
reaper
> > > 4 0 0 0 2 0x100204
pagedaemon
> > > 3 0 0 0 2 0x2100604
pfpurge
> > > 2 0 0 0 3 0x2100204 kmalloc
kmthread
> > > 1 0 0 0 3 0x2000004 initexec
swapper
> > > * 0 -1 0 0 7 0x2080204
swapper
> > > ddb{0}> trace
> > > Debugger(d069b999, d0a98c14, 2c0, 0) at Debugger+0x4
> > > cpu_boot_secondary(d0a98c00, 11, d05fcc12, d0828f70) at
cpu_boot_secondary+0x99
> > > cpu_boot_secondary_processors(4458a4a7, 0, 0, d05fcc12, 0) at
cpu_boot_secondary_processors+0x41
> > > main(0, 0, 0, 0, 0) at main+0x70c
> > > ddb{0}> show registers
> > > ds 0x10
> > > es 0x10
> > > fs 0x58
> > > gs 0
> > > edi 0x831000
> > > esi 0xd0a98c00 end+0x2f18b0
> > > ebp 0xd0828f18 end+0x81bc8
> > > ebx 0
> > > edx 0
> > > ecx 0xd06bbb84 kprintf_mutex
> > > eax 0x1c
> > > eip 0xd0448de0 Debugger+0x4
> > > cs 0x8
> > > eflags 0x246
> > > esp 0xd0828f18 end+0x81bc8
> > > ss 0xd0820010 end+0x78cc0
> > > Debugger+0x4: leave
> > > ddb{0}> boot dump
> > >
> > > -------
> > > OpenBSD 3.9-current (GENERIC) #1: Wed May 3 13:58:50 EST 2006
> > > [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> > > cpu0: Intel Pentium II Xeon ("GenuineIntel" 686-class, 1024KB L2 cache)
450 MHz
> > > cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
> > > real mem = 66613248 (65052K)
> > > avail mem = 53035008 (51792K)
> > > using 838 buffers containing 3432448 bytes (3352K) of memory
> > > mainbus0 (root)
> > > bios0 at mainbus0: AT/286+(2c) BIOS, date 04/21/04, BIOS32 rev. 0 @
0xfd880
> > > apm0 at bios0: Power Management spec V1.2
> > > apm0: AC on, battery charge unknown
> > > apm0: flags 30102 dobusy 0 doidle 1
> > > pcibios0 at bios0: rev 2.1 @ 0xfd880/0x780
> > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
> > > pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
> > > pcibios0: PCI bus #1 is the last bus
> > > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1a00! 0xca000/0x1000
0xdc000/0x4000! 0xe4000/0x4000!
> > > cpu0 at mainbus0
> > > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > > pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x01
> > > ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x01
> > > pci1 at ppb0 bus 1
> > > pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x08
> > > pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
> > > atapiscsi0 at pciide0 channel 0 drive 0
> > > scsibus0 at atapiscsi0: 2 targets
> > > cd0 at scsibus0 targ 0 lun 0: <NECVMWar, VMware IDE CDR00, 1.00> SCSI0
5/cdrom removable
> > > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> > > pciide0: channel 1 ignored (disabled)
> > > piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x08: SMBus
disabled
> > > vga1 at pci0 dev 15 function 0 "VMware Virtual SVGA II" rev 0x00
> > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > > mpt0 at pci0 dev 16 function 0 "Symbios Logic 53c1030" rev 0x01: irq 9
> > > scsibus1 at mpt0: 16 targets
> > > sd0 at scsibus1 targ 0 lun 0: <VMware, Virtual disk, 1.0> SCSI2 0/direct
fixed
> > > sd0: 4096MB, 4096 cyl, 64 head, 32 sec, 512 bytes/sec, 8388608 sec total
> > > sd1 at scsibus1 targ 1 lun 0: <VMware, Virtual disk, 1.0> SCSI2 0/direct
fixed
> > > sd1: 8192MB, 8192 cyl, 64 head, 32 sec, 512 bytes/sec, 16777216 sec total
> > > mpt0: target 0 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU
1
> > > mpt0: target 1 Synchronous at 160MHz width 16bit offset 127 QAS 1 DT 1 IU
1
> > > pcn0 at pci0 dev 17 function 0 "AMD 79c970 PCnet-PCI" rev 0x10,
Am79c970A, rev 0: irq 11, address 00:50:56:9c:20:ca
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5
> > > pckbd0 at pckbc0 (kbd slot)
> > > pckbc0: using irq 1 for kbd slot
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > pmsi0 at pckbc0 (aux slot)
> > > pckbc0: using irq 12 for aux slot
> > > wsmouse0 at pmsi0 mux 0
> > > pcppi0 at isa0 port 0x61
> > > midi0 at pcppi0: <PC speaker>
> > > spkr0 at pcppi0
> > > lpt0 at isa0 port 0x378/4 irq 7
> > > npx0 at isa0 port 0xf0/16: using exception 16
> > > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > > biomask e765 netmask ef65 ttymask ffe7
> > > pctr: 686-class user-level performance counters enabled
> > > mtrr: CPU supports MTRRs but not enabled
> > > dkcsum: sd0 matches BIOS drive 0x80
> > > dkcsum: sd1 matches BIOS drive 0x81
> > > root on sd0a
> > > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> > > --
> > > Craig
> > >
> > >
> >
> >
> > --
> > May the packets be with you.
> >
> >
>
--
May the packets be with you.
