Hello! I have a machine with Tekram DC395-UW with one IBM-disk ID2, a SONY-burner ID3 and two Seagate ST39102LW (ID0 and ID1). Id0 is set to be bootdrive in Tekram BIOS (ver 3.03).
The install starts fine from a IDE-cdromdrive (the SONY wont work, any ideas?). But when the disks are about ot be formated it stops to work. Labels from previous tries are there, but i cant assign mountpoints to all of them. When format is about to start it says (and sometimes after "would you like to use *all* of sd0 for openBSD? yes") check condition (error 0x70) on opcode 0x28 senskey illegal request asc/ascq asc 0x24 ascq 0x00 frucode 0x1 sksv error in CDB offset 3 bit 2 check condition (error 0x70) on opcode 0x28 senskey illegal request asc/ascq asc 0x24 ascq 0x00 frucode 0x1 sksv error in CDB offset 4 bit 6 Any ideas? <--------------------------------------------> Jon Sjvstedt