On 5/16/06, Theo de Raadt <[EMAIL PROTECTED]> wrote:
and also, please try newer code.
Yes, it is running with -current:
OpenBSD 3.9-current (GENERIC) #741: Sun May 14 23:14:16 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Duron(tm) Processor ("AuthenticAMD" 686-class, 64KB L2 cache) 851 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 519598080 (507420K)
avail mem = 466477056 (455544K)
using 4256 buffers containing 26083328 bytes (25472K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/30/03, BIOS32 rev. 0 @
0xfdae0, SMBIOS rev. 2.3 @ 0xf0650 (25 entries)
bios0: ECS M810DLU
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf78e0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SiS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x8000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SiS 740 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SiS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 650 VGA" rev 0x00: aperture at
0xc0000000, size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 740: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340015A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: irq 5,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: irq 11,
version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: SiS OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 3 function 3 "SiS 7002 USB" rev 0x00: irq 10
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: SiS EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
sis0 at pci0 dev 4 function 0 "SiS 900 10/100BaseTX" rev 0x90: irq 12,
address 00:0a:e6:fd:0a:b9
ukphy0 at sis0 phy 1: Generic IEEE 802.3u media interface, rev. 5: OUI
0x004063, model 0x0032
xl0 at pci0 dev 9 function 0 "3Com 3c905 100Base-TX" rev 0x00: irq 5,
address 00:60:08:0a:d5:1c
nsphy0 at xl0 phy 24: DP83840 10/100 PHY, rev. 1
xl1 at pci0 dev 11 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq
11, address 00:50:da:7c:08:e5
exphy0 at xl1 phy 24: 3Com internal media interface
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ef6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Thanks,
--
Fernando M. Braga
Telemacro Informagues e Servigos
+55 82 2121-2100
