I hate to add to the "Me Too" crowd about this issue, but I myself
have been experiencing this also. I was running a snapshot of 3.7
where the machine would crash pretty hard from it after the watchdog
timeout appeared a few times over the period of a few days. Now,
though, with 3.9 snapshot I see the timeouts but it hasn't crashed yet
from it:
As you can see from the dmesg, my network card is the lesser expensive
Linksys EG1032 marvel based card.
OpenBSD 3.9-current (GENERIC) #702: Thu Apr 20 00:36:31 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class) 2.43 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem = 1073217536 (1048064K)
avail mem = 811261952 (792248K)
using 4278 buffers containing 215060480 bytes (210020K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ed) BIOS, date 11/10/03, BIOS32 rev. 0 @ 0xf1e30
apm0 at bios0: Power Management spec V1.2 (BIOS mgmt disabled)
apm0: APM power management enable: unrecognized device ID (9)
apm0: APM engage (device 1): power management disabled (1)
apm0: AC on, battery charge unknown
apm0: flags b0102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x24b2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf23d0/224 (12 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc800 0xd0000/0x7c00!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G/GL" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82845G/GL/GV/GE/PE AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 12
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 14
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: irq 11
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
pci2 at ppb1 bus 2
"VIA VT6306 FireWire" rev 0x80 at pci2 dev 3 function 0 not configured
pciide0 at pci2 dev 4 function 0 "Promise PDC20376" rev 0x02: DMA
wd0 at pciide0 channel 0 drive 0: <ST380013AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 6
pciide0: using irq 11 for native-PCI interrupt
bge0 at pci2 dev 5 function 0 "Broadcom BCM5702X" rev 0x02, BCM5703 A2
(0x1002): irq 10, address 00:e0:18:bf:77:eb
brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
skc0 at pci2 dev 10 function 0 "Linksys EG1032" rev 0x12, Marvell
Yukon (0x1): irq 5
sk0 at skc0 port A, address 00:0c:41:eb:c4:35
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 3
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
pciide1 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide1: no compatibility interrupt for use by channel 0
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDR8161B, 0100> SCSI0
5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask fb4d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
