Whatever is sitting at target id 6 isn't replying. If this isn't an enclosure
device or something it means your device is busted.
On Mon, Jun 12, 2006 at 09:18:45AM -0500, Eric Pancer wrote:
> I had a machine crash which runs syslog-ng and takes syslog for some
> heavily-loaded firewalls. Over the weekend, we saw the machine crash on two
> ocassions. I believe there may be a bad hard disk in this host as well.
>
> This is a Dell 2850. We have several in production that work without
> problem.
>
> See the following...
>
> # disklabel sd3
> disklabel: /dev/rsd3c: Device not configured
>
> Here's a dmesg...see the last few lines. Any insight is appreciated.
>
> WARNING: terminal is not fully functional
> OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
> [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Xeon(TM) CPU 3.40GHz ("GenuineIntel" 686-class) 3.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,CNXT-ID
> cpu0: Enhanced SpeedStep disabled by BIOS
> real mem = 1073065984 (1047916K)
> avail mem = 972435456 (949644K)
> using 4278 buffers containing 53755904 bytes (52496K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xffe90
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb600/320 (18 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00)
> pcibios0: PCI bus #9 is the last bus
> bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x4000 0xec000/0x4000!
> ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x09
> ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x09
> pci1 at ppb0 bus 1
> ppb1 at pci1 dev 0 function 0 "Intel IOP331 Channel 0" rev 0x06
> pci2 at ppb1 bus 2
> mpt0 at pci2 dev 5 function 0 "Symbios Logic 53c1030" rev 0x08: irq 7
> scsibus0 at mpt0: 16 targets
> sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST336754LC, D403> SCSI3 0/direct
> fixed
> sd0: 34732MB, 50824 cyl, 2 head, 699 sec, 512 bytes/sec, 71132959 sec total
> sd1 at scsibus0 targ 1 lun 0: <SEAGATE, ST336754LC, D403> SCSI3 0/direct
> fixed
> sd1: 34732MB, 50824 cyl, 2 head, 699 sec, 512 bytes/sec, 71132959 sec total
> sd2 at scsibus0 targ 2 lun 0: <MAXTOR, ATLAS15K2_146SCA, JNZY> SCSI3
> 0/direct fi
> xed
> sd2: 140014MB, 48242 cyl, 8 head, 742 sec, 512 bytes/sec, 286749480 sec
> total
> sd3 at scsibus0 targ 6 lun 0: <, , > SCSI0 0/direct fixed
> sd3: drive offline
> mpt0: target 0 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
> mpt0: target 1 Synchronous at 160MHz width 16bit offset 63 QAS 0 DT 1 IU 1
> mpt0: target 2 Synchronous at 160MHz width 16bit offset 127 QAS 0 DT 1 IU 1
> mpt0: target 6 Asynchronous at 0MHz width 8bit offset 0 QAS 0 DT 0 IU 0
> mpt1 at pci2 dev 5 function 1 "Symbios Logic 53c1030" rev 0x08: irq 5
> scsibus1 at mpt1: 16 targets
> ppb2 at pci1 dev 0 function 2 "Intel IOP331 Channel 1" rev 0x06
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 4 function 0 "Intel MCH PCIE" rev 0x09
> pci4 at ppb3 bus 4
> ppb4 at pci0 dev 5 function 0 "Intel MCH PCIE" rev 0x09
> pci5 at ppb4 bus 5
> ppb5 at pci5 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
> pci6 at ppb5 bus 6
> em0 at pci6 dev 7 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 11,
> addr
> ess 00:14:22:21:70:1c
> ppb6 at pci5 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
> pci7 at ppb6 bus 7
> em1 at pci7 dev 8 function 0 "Intel PRO/1000MT (82541GI)" rev 0x05: irq 5,
> addre
> ss 00:14:22:21:70:1d
> ppb7 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x09
> pci8 at ppb7 bus 8
> uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 10
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801EB/ER USB" rev 0x02: irq 7
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: irq 6
> usb3 at ehci0: USB revision 2.0
> uhub3 at usb3
> uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> ppb8 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
> pci9 at ppb8 bus 9
> vga1 at pci9 dev 13 function 0 "ATI Radeon VE QY" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA,
> channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus2 at atapiscsi0: 2 targets
> cd0 at scsibus2 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462C, DE01> SCSI0
> 5/cdrom r
> emovable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom0: console
> biomask ffed netmask ffed ttymask ffef
> pctr: user-level cycle counter enabled
> uhub4 at uhub3 port 3
> uhub4: Dell product 0xa001, rev 2.00/0.00, addr 2
> uhub4: 2 ports with 2 removable, self powered, multiple transaction
> translators
> dkcsum: sd0 matches BIOS drive 0x80
> dkcsum: sd1 matches BIOS drive 0x81
> dkcsum: sd2 matches BIOS drive 0x82
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
> sd3(mpt0:6:0): Check Condition (error 0x70) on opcode 0x25
> SENSE KEY: Illegal Request
> ASC/ASCQ: No Additional Sense Information
> sd3(mpt0:6:0): Check Condition (error 0x70) on opcode 0x25
> SENSE KEY: Illegal Request
> ASC/ASCQ: No Additional Sense Information
>
> ddb> trace
> Debugger(609,d18a5000,d7d393e8,d8343820,0) at Debugger+0x4
> panic(d052d0a0,6fdecb0,4000,608,2615) at panic+0x63
> ffs_reallocblks(eb145c98,2b,0,4000,d05a76e0) at ffs_reallocblks+0x4c7
> VOP_REALLOCBLKS(d7b6e750,d18a6b80,d7dafe80,2615) at VOP_REALLOCBLKS+0x28
> cluster_write(d7dafe80,d7b6d578,9858000,0,eb145de8) at cluster_write+0x209
> ffs_write(eb145e08,d7b6e750,30042,d7b8de18,d05a70e0) at ffs_write+0x552
> VOP_WRITE(d7b6e750,eb145e98,13,d7d2b000,d7b6e750,20002,d7b8de18,2) at
> VOP_WRITE
> +0x34
> vn_write(d7d0e3c0,d7d0e3dc,eb145e98,d7d2b000) at vn_write+0x89
> dofilewrite(d7b8de18,4,d7d0e3c0,cfbe2440,1000) at dofilewrite+0x6d
> sys_write(d7b8de18,eb145f68,eb145f58,0,d7ae6700) at sys_write+0x47
> syscall() at syscall+0x2ea
> --- syscall (number 4) ---
> 0x2fce9d9:
> ddb> ps
> PID PPID PGRP UID S FLAGS WAIT COMMAND
> 3525 1 3525 0 3 0x4086 ttyin getty
> 5765 1 5765 0 3 0x4086 ttyin getty
> 31376 1 31376 0 3 0x84 select cron
> *25918 1 25918 0 7 0x4 syslog-ng
> 8404 1 27708 0 3 0x84 bpf arpwatch
> 20822 1 20822 0 3 0x40184 select sendmail
> 16450 1 27708 0 3 0x84 bpf arpwatch
> 24507 1 24507 0 3 0x84 select sshd
> 9832 1 9832 0 3 0x184 select inetd
> 31155 0 0 0 3 0x100204 acct acct
> 24279 1 24279 0 3 0x84 poll ntpd
> 16076 1 27708 83 3 0x186 poll ntpd
> 7741 19777 19777 74 3 0x184 bpf pflogd
> 19777 1 19777 0 3 0x84 netio pflogd
> 11128 14090 14090 73 2 0x184 syslogd
> 14090 1 14090 0 3 0x84 netio syslogd
> 4250 1 4250 0 3 0x84 mfsidl mount_mfs
> 15 0 0 0 3 0x100204 crypto_wa crypto
> 14 0 0 0 3 0x100204 aiodoned aiodoned
> 13 0 0 0 3 0x100204 syncer update
> 12 0 0 0 3 0x100204 cleaner cleaner
> 11 0 0 0 3 0x100204 reaper reaper
> 10 0 0 0 3 0x100204 pgdaemon pagedaemon
> 9 0 0 0 3 0x100204 pftm pfpurge
> 8 0 0 0 3 0x100204 usbevt usb3
> 7 0 0 0 3 0x100204 usbevt usb2
> 6 0 0 0 3 0x100204 usbevt usb1
> 5 0 0 0 3 0x100204 usbtsk usbtask
> 4 0 0 0 3 0x100204 usbevt usb0
> 3 0 0 0 2 0x100204 ipmi0
> 2 0 0 0 3 0x100204 kmalloc kmthread
> 1 0 1 0 3 0x4084 wait init
> 0 -1 0 0 3 0x80204 scheduler swapper
> ddb>
