On Mon, Jun 26, 2006 at 09:16:56AM -0600, Jeff Ross wrote: > After trying unsuccessfully to mount a Kodak Easy Share camera directly > (came up as ugen0), I decided to try a different approach and use a card > reader instead.
This is perhaps supported by software that uses gphoto See http://www.gphoto.org/proj/libgphoto2/support.php for a list of models. > > Sam's Club (a massive US members-only discount chain) had a Stratitec > USB2CR25 universal card reader for $15. I was delighted to see the > following in my post-hackathon -current dmesg when I plugged it in with a > Smart Media card in place: This should have worked before the hackathon as well, the device presents a generic USB mass storage interface to the operating system rather than an SD/MMC controller. > > umass0: Genesys Logic USB Storage, rev 2.00/93.17, addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets > sd0 at scsibus1 targ 1 lun 0: <Generic, STORAGE DEVICE, 9317> SCSI0 > 0/direct removable > sd0: drive offline > sd1 at scsibus1 targ 1 lun 1: <Generic, STORAGE DEVICE, 9317> SCSI0 > 0/direct removable > sd1: 7MB, 7 cyl, 64 head, 32 sec, 512 bytes/sec, 16000 sec total > sd2 at scsibus1 targ 1 lun 2: <Generic, STORAGE DEVICE, 9317> SCSI0 > 0/direct removable > sd2: drive offline > sd3 at scsibus1 targ 1 lun 3: <Generic, STORAGE DEVICE, 9317> SCSI0 > 0/direct removable > sd3: drive offline > > > Jeff