Is disabling ohci likely to be enough to prevent this recurring?
Any other suggestions?
Jul 12 23:58:39 gr1 /bsd: ohci0: unrecoverable error, controller halted
Jul 12 23:58:39 gr1 /bsd: ohci0: blocking intrs 0x10
Jul 12 23:58:39 gr1 /bsd: ohci1: unrecoverable error, controller halted
Jul 12 23:58:39 gr1 /bsd: ohci1: blocking intrs 0x10
Jul 12 23:58:39 gr1 /bsd: ehci0: unrecoverable error, controller halted
Jul 12 23:58:39 gr1 /bsd: ehci0: blocking intrs 0x10
Jul 12 23:58:39 gr1 /bsd: fxp1: warning: SCB timed out
I'm not sure if it panicked at this point, I haven't had chance to
put a conserver box up at that colo yet.
OpenBSD 3.9-current (GENERIC.MP) #821: Thu Jul 6 11:34:21 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: AMD Opteron(tm) Processor 146 ("AuthenticAMD" 686-class, 1024KB L2 cache)
2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3
real mem = 1073246208 (1048092K)
avail mem = 975052800 (952200K)
using 4256 buffers containing 53764096 bytes (52504K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 11/17/05, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf8dc0 (60 entries)
bios0: Supermicro H8SSL
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4f50/160 (8 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1166 product 0x0205
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x1800 0xcb000/0x1000
mainbus0: Intel MP Specification (Version 1.4) (RCC Blast )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type ISA
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0: apid 3 pa 0xfec02000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xb2
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "Intel S21154AE/BE PCI-PCI" rev 0x00
pci3 at ppb2 bus 3
fxp0 at pci3 dev 4 function 0 "Intel 8255x" rev 0x0d, i82550: apic 2 int 4 (irq
10), address 00:02:b3:c8:0d:c3
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
fxp1 at pci3 dev 5 function 0 "Intel 8255x" rev 0x0d, i82550: apic 2 int 5 (irq
10), address 00:02:b3:c8:0d:c4
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 4
bge0 at pci2 dev 3 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 2 int 8 (irq 10), address 00:30:48:56:6b:76
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 3 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 2 int 9 (irq 10), address 00:30:48:56:6b:77
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pciide0 at pci1 dev 14 function 0 "ServerWorks SATA" rev 0x00: DMA
pciide0: using apic 1 int 11 (irq 11) for native-PCI interrupt
pciide0: port 0: PHY offline
pciide0: port 1: PHY offline
pciide0: port 2: PHY offline
pciide0: port 3: PHY offline
pciide1 at pci1 dev 14 function 1 "ServerWorks SATA" rev 0x00
piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
iic0 at piixpm0
admcts0 at iic0 addr 0x2c
pciide2 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
wd0 at pciide2 channel 0 drive 0: <TRANSCEND DOM512M>
wd0: 1-sector PIO, LBA, 488MB, 1000944 sectors
wd0(pciide2:0:0): using PIO mode 4
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int
10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int
10 (irq 10), version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01: apic 1 int
10 (irq 10)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vga1 at pci0 dev 5 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
