On 20/07/06, Adam <[EMAIL PROTECTED]> wrote:
"Andreas Kahari" <[EMAIL PROTECTED]> wrote:
> I do have another i386 at home, an ancient 133MHz machine. It doesn't
> have an fxp card in it though and I would need to back it up and
> install OpenBSD on it. I thought it would be easier to find someone
> on the list with i386+fxp+xfce4...
I'm running xfce4 on my laptop with an onboard fxp. The netload plugin
has always worked fine here, ever since xfce4 got added to ports.
Ok, thanks. I'm assuming that's a i386 laptop (you didn't say). This
means that there is some peculiarity with my laptop. What would be
needed to track this down?
I have attached a dmesg here (sorry for possibly bad linewraps,
courtesy of Gmail):
OpenBSD 3.9-current (GENERIC) #11: Sat Jul 8 15:14:04 BST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1700MHz ("GenuineIntel"
686-class) 1.69 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1700 MHz (1484 mV): speeds: 1700, 1400, 1200,
1000, 800, 600 MHz
real mem = 535851008 (523292K)
avail mem = 482983936 (471664K)
using 4256 buffers containing 26894336 bytes (26264K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(97) BIOS, date 11/21/03, BIOS32 rev. 0 @
0xfd751, SMBIOS rev. 2.3 @ 0xd8010 (17 entries)
bios0: Sony Corporation PCG-Z1XSP(GB)
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd750/0x8b0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf30/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd8000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev
0x03pci_intr_map: no mapping for pin C
: couldn't map interrupt
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev
0x03pci_intr_map: no mapping for pin D
: couldn't map interrupt
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci2 at ppb1 bus 2
cbb0 at pci2 dev 5 function 0 "Ricoh 5C475 CardBus" rev 0xb8: irq 3
"Ricoh 5C551 Firewire" rev 0x00 at pci2 dev 5 function 1 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x83, i82562: irq
9, address 08:00:46:c8:ad:ab
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
iwi0 at pci2 dev 11 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
irq 9, address 00:0e:35:07:44:15
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N080ATMR04-0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJ-812, K101> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev
0x03pci_intr_map: no mapping for pin B
: polling
iic0 at ichiic0
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 9, ICH4 AC97
ac97: codec id 0x594d4803 (Yamaha YMF753-S)
ac97: codec features 18 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
--
Andreas Kahari
Somewhere in the general Cambridge area, UK
