I recently purchased a USB serial adapter, which is currently showing up as:
ugen0 at uhub0 port 1
ugen0: ArkMicroChips USB-UART Controller, rev 1.10/0.01, addr 3
usbdevs -v reports:
port 1 addr 3: full speed, power 500 mA, config 1, USB-UART
Controller(0x0232), ArkMicroChips(0x6547), rev 0.01
Does anyone know if this just needs an entry in the right file?
If not, are there any Australian developers who want to have a shot at
supporting the device?
--
Craig
-----------dmesg--------------
OpenBSD 3.9-current (GENERIC) #44: Fri Jul 7 09:51:30 EST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(TM) XP 2400+ ("AuthenticAMD" 686-class, 256KB L2 cache) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073102848 (1047952K)
avail mem = 974966784 (952116K)
using 4256 buffers containing 53760000 bytes (52500K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(bb) BIOS, date 11/19/02, BIOS32 rev. 0 @ 0xf1920,
SMBIOS rev. 2.3 @ 0xf3b10 (40 entries)
bios0: ASUSTeK Computer INC. A7N266VM
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x21e2
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf2120/192 (10 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x10de product 0x01b2
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xd000 0xd0000/0x1800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "NVIDIA nForce PCI Host" rev 0xb2
"NVIDIA nForce 220/420" rev 0xb2 at pci0 dev 0 function 1 not configured
"NVIDIA nForce 220/420" rev 0xb2 at pci0 dev 0 function 2 not configured
"NVIDIA nForce 220 DDR" rev 0xb2 at pci0 dev 0 function 3 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce ISA" rev 0xc3
amdpm0 at pci0 dev 1 function 1 "NVIDIA nForce SMBus" rev 0xc1
iic0 at amdpm0
lm1 at iic0 addr 0x2d: AS99127F
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce USB" rev 0xc3: irq 10, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 0 "NVIDIA nForce USB" rev 0xc3: irq 10, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
nfe0 at pci0 dev 4 function 0 "NVIDIA nForce LAN" rev 0xc2: irq 10, address
00:e0:18:ad:63:80
rlphy0 at nfe0 phy 1: RTL8201L 10/100 PHY, rev. 1
auich0 at pci0 dev 6 function 0 "NVIDIA nForce AC97" rev 0xc2: irq 11, nForce
AC97
ac97: codec id 0x414c4720 (Avance Logic ALC650)
ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
ppb0 at pci0 dev 8 function 0 "NVIDIA nForce PCI-PCI" rev 0xc2
pci1 at ppb0 bus 1
fxp0 at pci1 dev 7 function 0 "Intel 8255x" rev 0x0c, i82550: irq 5, address
00:02:b3:2b:c1:ed
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
pciide0 at pci0 dev 9 function 0 "NVIDIA nForce IDE" rev 0xc3: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ATAPI-CD, ROM-DRIVE-50MAX, 50LT> SCSI0 5/cdrom
removable
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ppb1 at pci0 dev 30 function 0 "NVIDIA nForce AGP" rev 0xb2
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ATI Radeon 9200" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"ATI Radeon 9200 Sec" rev 0x01 at pci2 dev 0 function 1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f7cd netmask f7ed ttymask f7ef
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhub0: device problem, disabling port 2
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: B16_b_02 USB-PS/2 Optical Mouse, rev 2.00/98.02, addr 2, iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev0: at uhub0 port 2 (addr 2) disconnected
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: B16_b_02 USB-PS/2 Optical Mouse, rev 2.00/98.02, addr 2, iclass 3/1
ums0 at uhidev0: 4 buttons and Z dir.
wsmouse0 at ums0 mux 0
nfe0: tx v1 error 0x6401<UNDERFLOW>
arp: attempt to add entry for 192.168.20.1 on nfe0 by 00:50:8b:5a:27:b6 on fxp0
nfe0: tx v1 error 0x6401<UNDERFLOW>
nfe0: tx v1 error 0x6401<UNDERFLOW>
uhub0: port 1, set config at addr 3 failed
uhub0: device problem, disabling port 1
ugen0 at uhub0 port 1
ugen0: ArkMicroChips USB-UART Controller, rev 1.10/0.01, addr 3
--------------usbdevs-----------
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
NVIDIA(0x10de), rev 1.00
port 1 addr 3: full speed, power 500 mA, config 1, USB-UART
Controller(0x0232), ArkMicroChips(0x6547), rev 0.01
port 2 addr 2: low speed, power 98 mA, config 1, USB-PS/2 Optical
Mouse(0xc024), B16_b_02(0x046d), rev 98.02
port 3 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
NVIDIA(0x10de), rev 1.00
port 1 powered
port 2 powered
port 3 powered
