Hello everybody,
The Box I`m using for multimedia died so I tried to watch a simple
Movie with mplayer.
The video is a OGM-File and contains 2 audio streams and 2 Subtitles.
The Video Codec is DivX/Xvid and the audio streams are compressed using
MP3.
When I try to play the movie with mplayer it starts first but then
hangs some seconds later and I get audio only.
I was suprised because I watched the same video some Versions ago
(~3.6-3.7) with OpenBSD and had NO problems (but the Hardware was
different). I`ve even recompiled the mplayer with enablexvid (why is it
disabled by default?!) but that didn`t helped.
OS: OpenBSD AMD64 3.9 STABLE
Graficcard: Matrox G450 PCI (dmesg tells me it`s AGP but that Board
simply has NO AGP Slot)
CPUs: 2x 256 Opteron
RAM: 4x512MB
Board: Tyan 2882-D (Dualcore-Ready Version)
OpenBSD 3.9-stable (GENERIC.MP) #0: Fri May 12 07:48:53 CEST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2147020800 (2096700K)
avail mem = 1835290624 (1792276K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
ipmi0 at mainbus0bmc_io_wait_cold fails : *v=ff m=02 b=00 write_cmd
kcs_sendmsg: 18 01
: unable to send get device id command
mainbus0: Intel MP Specification (Version 1.1) (TYAN S2882 )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Opteron(tm) Processor 252, 2591.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu0: DTLB 32 4KB entries fully
associative, 8 4MB entries fully associative cpu0: apic clock running
at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD
Opteron(tm) Processor 252, 2590.91 MHz cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8
4MB entries fully associative cpu1: DTLB 32 4KB entries fully
associative, 8 4MB entries fully associative mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xffff80000373ae24, version 11, 24 pins
ioapic1 at mainbus0 apid 3: pa 0xffff80000373ad24, version 11, 4 pins
ioapic2 at mainbus0 apid 4: pa 0xffff80000373ac24, version 11, 4 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 6 function 0 "AMD 8111 PCI-PCI" rev 0x07
pci1 at ppb0 bus 4
ohci0 at pci1 dev 0 function 0 "AMD 8111 USB" rev 0x0b: apic 2 int 19
(irq 10), version 1.0, legacy support usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci1 dev 0 function 1 "AMD 8111 USB" rev 0x0b: apic 2 int 19
(irq 10), version 1.0, legacy support usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: AMD OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
emu0 at pci1 dev 4 function 0 "Creative Labs SoundBlaster Live" rev
0x08: apic 2 int 16 (irq 9) ac97: codec id 0x43525914 (Cirrus Logic
CS4297A rev 4) ac97: codec features headphone, 20 bit DAC, 18 bit ADC,
Crystal Semi 3D audio0 at emu0
"Creative Labs PCI Gameport Joystick" rev 0x08 at pci1 dev 4 function 1
not configured pciide0 at pci1 dev 5 function 0 "CMD Technology SiI3114
SATA" rev 0x02: DMA pciide0: using apic 2 int 19 (irq 10) for
native-PCI interrupt pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <HDS722516VLSA80>
wd0: 16-sector PIO, LBA48, 157066MB, 321672960 sectors
wd0(pciide0:0:0): using BIOS timings, Ultra-DMA mode 5
fxp0 at pci1 dev 8 function 0 "Intel 8255x" rev 0x10, i82551: apic 2
int 18 (irq 5), address inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
pcib0 at pci0 dev 7 function 0 "AMD AMD8111 LPC" rev 0x05
pciide1 at pci0 dev 7 function 1 "AMD 8111 IDE" rev 0x03: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
wd1 at pciide1 channel 0 drive 0: <WDC WD1200JB-75CRA0> wd1: 16-sector
PIO, LBA, 114440MB, 234375000 sectors wd1(pciide1:0:0): using PIO mode
4, Ultra-DMA mode 2 wd2 at pciide1 channel 1 drive 0: <SAMSUNG SP1614N>
wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd3 at pciide1 channel 1 drive 1: <SAMSUNG SP1614N>
wd3: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
wd3(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 5
amdiic0 at pci0 dev 7 function 2 "AMD 8111 SMBus" rev 0x02: SCI
iic0 at amdiic0
amdpm0 at pci0 dev 7 function 3 "AMD 8111 Power" rev 0x05: rng active
iic1 at amdpm0
lm1 at iic1 addr 0x28: W83627HF
adt0 at iic1 addr 0x2e: adm1027 (ADT7460) rev 60
ppb1 at pci0 dev 10 function 0 "AMD 8131 PCIX" rev 0x12
pci2 at ppb1 bus 3
ahd0 at pci2 dev 6 function 0 "Adaptec AIC-7902B U320" rev 0x10: apic 3
int 0 (irq 9) ahd0: aic7902, U320 Wide Channel A, SCSI Id=7, PCI-X
67-100Mhz, 512 SCBs scsibus0 at ahd0: 16 targets
sd0 at scsibus0 targ 6 lun 0: <IBM, IC35L036UWDY10-0, S27E> SCSI3
0/direct fixed sd0: 35003MB, 36703 cyl, 3 head, 651 sec, 512 bytes/sec,
71687340 sec total ahd1 at pci2 dev 6 function 1 "Adaptec AIC-7902B
U320" rev 0x10: apic 3 int 1 (irq 11) ahd1: aic7902, U320 Wide Channel
B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs scsibus1 at ahd1: 16 targets
bge0 at pci2 dev 9 function 0 "Broadcom BCM5704C" rev 0x03, BCM5704 A3
(0x2003): apic 3 int 0 (irq 9), address brgphy0 at bge0 phy 1: BCM5704
10/100/1000baseT PHY, rev. 0 bge1 at pci2 dev 9 function 1 "Broadcom
BCM5704C" rev 0x03, BCM5704 A3 (0x2003): apic 3 int 1 (irq 11), address
0 brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0 aapic0 at
pci0 dev 10 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01 ppb2 at pci0 dev
11 function 0 "AMD 8131 PCIX" rev 0x12 pci3 at ppb2 bus 1
ppb3 at pci3 dev 1 function 0 vendor "Hint", unknown product 0x0021 rev
0x12 pci4 at ppb3 bus 2
vga1 at pci4 dev 0 function 0 "Matrox MGA G400/G450 AGP" rev 0x82
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
aapic1 at pci0 dev 11 function 1 "AMD 8131 PCIX IOAPIC" rev 0x01
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lm0 at isa0 port 0x290/8: W83627HF
lm1 detached
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
Kernelized RAIDframe activated
dkcsum: wd0 matches BIOS drive 0x82
dkcsum: wd2 matches BIOS drive 0x83
dkcsum: wd3 matches BIOS drive 0x81
ahd0: target 6 synchronous with period = 0x8, offset = 0x7f(RDSTRM|DT|
IU|RTI|QAS) dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
raid0: Component /dev/wd2a being configured at row: 0 col: 0
Row: 0 Column: 0 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 112341 Mod Counter: 1745
Clean: Yes Status: 0
raid0: Component /dev/wd3a being configured at row: 0 col: 1
Row: 0 Column: 1 Num Rows: 1 Num Columns: 2
Version: 2 Serial Number: 112341 Mod Counter: 1745
Clean: Yes Status: 0
raid0 (root)
pppoe0: phase establish
I`ve also noted a strange Bug I`ve reported long ago (~2.8?!) with the
Xorg Server.
If I do press the arrow-down key (or any arrow key) just a littlebit
longer (~2Secs) the whole screen (e.g. the Browser) scrolls down until
the document has ended (no matter HOW long the document is..) and even
then I`ve to press multiple times the arrow up key to be able to scroll
up. That`s 100% a X-Server Bug but I`m no developer so I can`t tell you
what`s wrong (and it never appeared at the i386, just on amd64).
This appears offen but not always but that`s just another topic maybe.
But I hope somebody knows why the videos do hang even I was able to
watch them some time ago. :-/
Kind regards,
Sebastian
