-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 After playing a while with swapping pci busses as for the intel lan cards i finally came to a point where both those cards and the DEC are recognized properly by kernel. now the dmesg have changed:
OpenBSD 3.9 (RAMDISK_CD) #1025: Thu Mar 2 02:43:29 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD cpu0: Intel Pentium III Xeon ("GenuineIntel" 686-class, 2048KB L2 cache) 550 MHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real mem = 4026081280 (3931720K) avail mem = 3669291008 (3583292K) using 4278 buffers containing 201408512 bytes (196688K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 pcibios0: PCI BIOS has 14 Interrupt Routing table entries pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00) pcibios0: PCI bus #2 is the last bus bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000 0xcc000/0x800 0xe8000/0x6000! 0xee000/0x2000! cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) ppb0 at pci0 dev 2 function 0 "DEC 21154 PCI-PCI" rev 0x02 pci1 at ppb0 bus 1 fxp0 at pci1 dev 4 function 0 "Intel 8255x" rev 0x05, i82558: irq 11, address 00:50:8b:6f:c5:fe inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0 fxp1 at pci1 dev 5 function 0 "Intel 8255x" rev 0x05, i82558: irq 11, address 00:50:8b:6f:c5:ff inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0 ppb1 at pci0 dev 3 function 0 "DEC 21154 PCI-PCI" rev 0x05 pci2 at ppb1 bus 2 fxp2 at pci2 dev 4 function 0 "Intel 8255x" rev 0x08, i82559: irq 15, address 00:02:a5:ad:e6:48 inphy2 at fxp2 phy 1: i82555 10/100 PHY, rev. 4 fxp3 at pci2 dev 5 function 0 "Intel 8255x" rev 0x08, i82559: irq 15, address 00:02:a5:ad:e6:49 inphy3 at fxp3 phy 1: i82555 10/100 PHY, rev. 4 ahc0 at pci0 dev 4 function 0 "Adaptec AHA-2940U2 U2" rev 0x00: irq 5 scsibus0 at ahc0: 16 targets ahc0: target 6 using 8bit transfers ahc0: target 6 using asynchronous transfers st0 at scsibus0 targ 6 lun 0: <QUANTUM, DLT7000, 2255> SCSI2 1/sequential removable st0: drive empty or not ready "Compaq PCI Hotplug" rev 0x11 at pci0 dev 11 function 0 not configured "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 12 function 0 not configured vga1 at pci0 dev 13 function 0 "ATI Mach64 GV" rev 0x7a wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) pcib0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x4d pciide0 at pci0 dev 15 function 1 vendor "ServerWorks", unknown product 0x0210 rev 0x4a: DMA (unsupported), channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom removable pciide0: no compatibility interrupt for use by channel 1 vendor "Corrollary", unknown product 0x1117 (class memory subclass RAM, rev 0x05) at pci0 dev 20 function 0 not configured vendor "Corrollary", unknown product 0x1117 (class memory subclass RAM, rev 0x05) at pci0 dev 20 function 1 not configured pchb0 at pci0 dev 25 function 0 vendor "Compaq", unknown product 0x6010 rev 0x01 pchb1 at pci0 dev 26 function 0 vendor "Compaq", unknown product 0x6010 rev 0x01 pchb2 at pci0 dev 27 function 0 vendor "Compaq", unknown product 0x6010 rev 0x01 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask 77e5 netmask ffe5 ttymask ffe7 rd0: fixed, 3800 blocks root on rd0a rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02 czeslaw iD8DBQFFBmE/3VOnD+tUq3sRAhvRAJ9kGppDvTotjSbEPSjVPIXJzy3u4QCdHGaO IBq4Bsg9uWdMcvh82xD7Vbk= =nd2Z -----END PGP SIGNATURE-----