sorry,
forgot the dmesg.
OpenBSD 4.0 (GENERIC) #1103: Thu Aug 31 19:36:08 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC"
586-class) 267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133791744 (130656K)
avail mem = 114692096 (112004K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(fa) BIOS, date 05/02/05, BIOS32 rev. 0 @
0xfc5f2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
ral0 at pci0 dev 13 function 0 "Ralink RT2560" rev 0x01: irq 12, address
00:0f:ea:84:5a:ae
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
sis0 at pci0 dev 14 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 10, address 00:0d:b9:01:de:38
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
sis1 at pci0 dev 16 function 0 "NS DP83815 10/100" rev 0x00, DP83816A:
irq 11, address 00:0d:b9:01:de:39
nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1
gscpcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
gpio0 at gscpcib0: 64 pins
"NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA THNCF256MPG>
wd0: 1-sector PIO, LBA, 244MB, 500736 sectors
wd0(pciide0:0:0): using PIO mode 4
"NS SCx200 AUDIO" rev 0x00 at pci0 dev 18 function 3 not configured
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6
revision 3 wdstatus 0
isa0 at gscpcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
gscsio0 at isa0 port 0x2e/2: SC1100 SIO rev 1: ACB1 ACB2
iic0 at gscsio0
iic1 at gscsio0
lmtemp0 at iic1 addr 0x48: lm77
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
biomask e3ef netmask ffef ttymask ffef
pctr: no performance counters in CPU
nvram: invalid checksum
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
clock: unknown CMOS layout
On Wed, Sep 13, 2006 at 01:25:18PM +0200, Thomas Schoeller wrote:
> hello,
> i have a problem with me wrap board and a gigabyte ral card in hostap
> mode. when my ibook or my thinkpad(with windows) is on battery then i
> have packet lost. when the notebooks are connected to power the
> connection is fine.
> it seem i have this problem:
> http://www.intel.com/support/wireless/wlan/sb/cs-006205.htm
> but i have not found a workaround for my apple notebook. is this problem
> known?
>
> any hints are welcome :)
> thx
> thomas
