On Thursday 14 September 2006 17:38, Karle, Chris wrote:
> Is anyone using a Realtek 8139 card with OpenBSD 3.9? I noticed that mbufs
> will slowly leak when using it. I noticed this after switching to 3.9. I
> don't know if something happened to the card or not... maybe there is a
> hardware error now that is making it behave funky.
>
> If you're using a "rl*" can you take a look at your mbuf usage (netstat
> -m)? Me and another person both see something similar.
>
> Thanks,
> Chris
>
>
> dmesg:
> rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: irq 11, address
> 00:48:54:65:39:5a
> rlphy0 at rl0 phy 0: RTL internal PHY
OpenBSD 4.0 (GENERIC) #1104: Fri Sep 1 11:54:27 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
rl0 at pci0 dev 12 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:0a:cd:06:2d:c1
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci0 dev 13 function 0 "Realtek 8139" rev 0x10: irq 12, address
00:e0:7d:90:b2:22
rlphy1 at rl1 phy 0: RTL internal PHY
1513 mbufs in use:
1342 mbufs allocated to data
6 mbufs allocated to packet headers
165 mbufs allocated to socket names and addresses
363/590/6144 mbuf clusters in use (current/peak/max)
1616 Kbytes allocated to network (68% in use)
0 requests for memory denied
0 requests for memory delayed
0 calls to protocol drain routines
6:08PM up 11 days, 16 hrs, 4 users, load averages: 0.42, 0.28, 0.22
I DO see every once in a while isc-dhcp saying something along the
lines "can't send - no buffer space available" - but that's on an interface
served by ralink card. And no, I don't really know how to interpret the above
data, I just hope it will be useful to someone ;)
--
viq
