I'm using fstab to create /var /tmp and /dev in mfs using swap in fstab to
save writes to the CF card in our device.
/etc/fstab
---
/dev/wd0a /ffs rw,noatime 1 1
swap /var mfs rw,-P=/template/var,-s=65535,noexec,nosuid,nodev 0 0
swap /dev mfs rw,-P=/template/dev,-s=1200,-i=128,noexec,nosuid 0 0
---
[
/tmp is linked one time during setup with:
ln -s /var/tmp /tmp
]
snipit of boot with warning:
---
Automatic boot in progress: starting file system checks.
/dev/rwd0a: files system is clean; not checking
Warning: inode blocks/cyl group (132) >= data blocks (63) in last
cylinder group. This implies 1022 sector(s) cannot be allocated.
setting tty flags
---
I think this may be normal, but I'm concerned I haven't configured the size
values in fstab correctly and I'm wasting space in RAM -
or perhaps my entire fstab config may cause a more ugly problems that I
haven't run into yet?
I know these are noob questions, but I researched the best I can an just need
to make sure my fstab and linking /tmp to /var/tmp is correct... thanks,
Ray
