I'm trying to get ACPI support on my Toshiba Satellite laptop (Phoenix bios) which runs 3.9-release. I read the acpid(8) manpage; but doing a "acpid -d" gives an error - "acpid: open: Device not configured." Also, there's no such file as "/etc/acpi/suspend" and "/etc/acpi/powerdown"
Is there any patch etc. available for ACPI support on 3.9 at this stage? Here's my dmesg - OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID real mem = 468688896 (457704K) avail mem = 420491264 (410636K) using 4278 buffers containing 23535616 bytes (22984K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(49) BIOS, date 04/07/05, BIOS32 rev. 0 @ 0xfd700 pcibios0 at bios0: rev 2.1 @ 0xfd700/0x900 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf00/224 (12 entries) pcibios0: no compatible PCI ICU found: ICU vendor 0x1002 product 0x434c pcibios0: PCI bus #3 is the last bus bios0: ROM list: 0xc0000/0xf000 0xd0000/0x6000! 0xd6000/0x800! 0xd8000/0x1000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "ATI RS300 Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "ATI Radeon IGP 9100 AGP" rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP 9100" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ohci0 at pci0 dev 19 function 0 "ATI SB200 USB" rev 0x01: irq 11, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ATI OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1 at pci0 dev 19 function 1 "ATI SB200 USB" rev 0x01: irq 11, version 1.0, legacy support usb1 at ohci1: USB revision 1.0 uhub1 at usb1 uhub1: ATI OHCI root hub, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered ehci0 at pci0 dev 19 function 2 "ATI SB200 USB2" rev 0x01: irq 11 usb2 at ehci0: USB revision 2.0 uhub2 at usb2 uhub2: ATI EHCI root hub, rev 2.00/1.00, addr 1 uhub2: 6 ports with 6 removable, self powered piixpm0 at pci0 dev 20 function 0 "ATI SB200 SMBus" rev 0x17: SMI iic0 at piixpm0 pciide0 at pci0 dev 20 function 1 "ATI IXP200 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23FA-60> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-R6112, 1031> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 pcib0 at pci0 dev 20 function 3 "ATI SB200 PCI-ISA" rev 0x00 ppb1 at pci0 dev 20 function 4 "ATI SB200 PCI-PCI" rev 0x00 pci2 at ppb1 bus 2 "Texas Instruments TSB43AB21 FireWire" rev 0x00 at pci2 dev 0 function 0 not configured ath0 at pci2 dev 2 function 0 "Atheros AR5212" rev 0x01: irq 11 ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR4W, address 00:90:96:72:4d:f1 rl0 at pci2 dev 3 function 0 "Realtek 8139" rev 0x10: irq 11, address 00:02:3f:d3:3a:7b rlphy0 at rl0 phy 0: RTL internal PHY cbb0 at pci2 dev 4 function 0 "ENE CB-1410 CardBus" rev 0x01: irq 11 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20 pcmcia0 at cardslot0 auixp0 at pci0 dev 20 function 5 "ATI IXP200 AC97" rev 0x00: irq 11 auixp0: soft resetting aclink auixp0: not up; resetting aclink hardware auixp0: not up; resetting aclink hardware auixp0: aclink hardware reset successful "ATI IXP200 Modem" rev 0x01 at pci0 dev 20 function 6 not configured isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo biomask ef75 netmask ef75 ttymask fff7 pctr: user-level cycle counter enabled ath1 at cardbus0 dev 0 function 0 "Atheros Communications, Inc., AR5001-0000-0000, Wireless LAN Reference Card": irq 11 ath1: AR5213 7.9 phy 4.5 rf2112a 5.6: RF radio not supported dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 ac97: codec id 0x414c4740 (Avance Logic ALC202) ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Realtek 3D audio0 at auixp0