Hello,
I can't boot the latest snapshot if the card is plugged. The boot process
stops just after (sometimes before) the starting of the network.
If I boot from bsd.rd or bsd.mp it works fine : the card is detected and
works.
If I boot without the network card : bsd boots.
Here is the dmesg from bsd.rd (latest snapshot):
OpenBSD 4.0-current (RAMDISK_CD) #901: Fri Oct 6 19:11:39 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 536342525 (523772K)
avail mem = 448868352 (438348K)
using 13145 buffers containing 53841920 bytes (52580K) of memory
maisbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Celeron(R) CPU 2.53GHz, 2533.72 MHz
cpu0: FPU, VME, DE, PSE, TSC, MSR, PAE, MCE, CX8, APIC, SEP, MTRR, PGE, MCA,
CMOV, PAT, PSE36, CFLUSH, DS, ACPI, MMX, FXSR, SSE, SSE2, SS, HTT, TM, SBF,
SSE3, NXE, LONG
cpu0: 256KB 64b/line 4-way L2 cache
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7230 MCH" rev 0x81
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at pbb1 bus 2
ppb2 at pci2 dev 1 function 0 "Pericom PI7C21P100 PCIX-PCIX" rev 0x01
pci3 at ppb2 bus 3
em0 at pci3 dev 4 function 0 "Intel PRO/1000MT QP (82546GB)" rev 0x03 : irq
10, address 00:0e:0c:bb:53:08
em1 at pci3 dev 4 function 1 "Intel PRO/1000MT QP (82546GB)" rev 0x03 : irq
11, address 00:0e:0c:bb:53:09
em2 at pci3 dev 6 function 0 "Intel PRO/1000MT QP (82546GB)" rev 0x03 : irq
15, address 00:0e:0c:bb:53:0a
em3 at pci3 dev 6 function 1 "Intel PRO/1000MT QP (82546GB)" rev 0x03 : irq
5, adress 00:0e:0c:bb:53:0b
ppb3 at pci0 dev 28 function 4 "Intel 82801G PCIE" rev 0x01
pci4 at ppb3 bus 4
bge0 at pci4 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201) : irq 10, adress 00:17:31:a7:84:ba
brgphy0 at bge0 phy 1 : BCM5750 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 28 function 5 "Intel 82801G PCIE" rev 0x01
pci5 at ppb4 bus 5
bge1 at pci5 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201) : irq 11, address 00:17:31:a7:84:bb
brgphy1 at bge1 phy 1 : BCM5750 10/100/1000baseT PHY, rev. 0
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci6 at ppb5 bus 6
vga1 at pci6 dev 2 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1 : console (80x25, vt100 emulation)
"Intel 82801GB LPC" rev 0x01 at pci0 dev 31 function 0 not configured
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01 : DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0 : <QUANTUM FIREBALLlct15 07>
wd0: 16-sector PIO, LBA, 7162MB, 14668290 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0 : <PLEXTOR, DVDR PX-716A, 1.08> SCSI0 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
intr_established: pic pic0 pin 15: can't share type 3 with 2
pciide0: no compatibility interrupt for use by channel 1
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 5 for native-PCI interrupt
"Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured"
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 : console keyboard, using wsdisplay0
rd0: fixed, 3584 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
Thank you for your help.
Don't hesitate to ask me questions about the card, I could help you to make
it work.
Bye.
