I tried enabling ACPI (uncommenting ACPIVERBOSE and ACPI_ENABLE and the
acpi* devices) in -current, and the resulting kernel doesn't boot. It
hangs after acpitimer0, partial dmesg below. GENERIC dmesg can be found
at http://marc.theaimsgroup.com/?m=116079014005773. Let me know if
there's anything I can test to help improve support, thanks.
cpu0: Intel(R) Pentium(R) M processor 2.00GHz ("GenuineIntel" 686-class)
2 GHz
cpu0:
FPU,F86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 2000 MHz (1356 mV): speeds: 2000, 1600, 1333,
1067, 800 MHz
real mem = 2146856960 (2096540K)
avail mem = 1950199808 (1904492K)
using 4256 buffers containing 107466752 bytes (104948K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 07/22/05, BIOS32 rev. 0 @
0xf0000, SMBIOS rev. 2.3 @ 0xf2d5c (23 entries)
bios0: Hewlett-Packard HP Compaq nc8230 (PR173UA#ABA)
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf07c0/192 (10 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5330/192 (10 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FBM LPC" rev 0x00)
pcibios0: PCI bus #32 is the last bus
bios0: ROM list: 0xc0000/0x10000
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC MCFG SSDT
acpitimer0 at acpi0: 3579545 Hz, 24 bits
