This is what I see: > [EMAIL PROTECTED]:~$ df > Filesystem 512-blocks Used Avail Capacity Mounted on > /dev/wd0a 74826724 27903788 43181600 39% / > se-nas01:/fs04/prodstfs01 4181818080 1654186208 -1767335424 40% /data > [EMAIL PROTECTED]:~$ df -h > Filesystem Size Used Avail Capacity Mounted on > /dev/wd0a 35.7G 13.3G 20.6G 39% / > se-nas01:/fs04/prodstfs01 1.9T 789G -843G 40% /data > [EMAIL PROTECTED]:~$
The archives show that this was reported (at least) once before, but was fixed in 3.7. Maybe I missed a memo. dmesg follows: OpenBSD 3.9 (GENERIC.MP) #598: Thu Mar 2 02:37:06 MST 2006 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Pentium(R) 4 CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID real mem = 1071689728 (1046572K) avail mem = 971124736 (948364K) using 4278 buffers containing 53686272 bytes (52428K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+(00) BIOS, date 01/21/05, BIOS32 rev. 0 @ 0xffe90 apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfeae0/160 (8 entries) pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801EB/ER LPC" rev 0x00) pcibios0: PCI bus #1 is the last bus bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800! 0xcc000/0xe800 0xda800/0x1800 mainbus0: Intel MP Specification (Version 1.4) (DELL Opti 170L ) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 199 MHz mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type ISA ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apic 2 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "Intel 82865G/PE/P CPU-I/0-1" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02: aperture at 0xe8000000, size 0x8000000 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16 (irq 11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 19 (irq 10) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 2 int 16 (irq 11) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 2 int 23 (irq 9) usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 8 ports with 8 removable, self powered ppb0 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2 pci1 at ppb0 bus 1 fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 2 int 20 (irq 10), address 00:16:76:13:ef:d6 inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD400BB-75JHC0> wd0: 16-sector PIO, LBA, 38146MB, 78125000 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD-ROM TS-H192C, DE00> SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 pciide1 at pci0 dev 31 function 2 "Intel 82801EB SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 2 int 18 (irq 5) for native-PCI interrupt ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 2 int 17 (irq 3) iic0 at ichiic0 "unknown" at iic0 addr 0x18 not configured auich0 at pci0 dev 31 function 5 "Intel 82801EB/ER AC97" rev 0x02: apic 2 int 17 (irq 3), ICH5 AC97 ac97: codec id 0x41445370 (Analog Devices AD1980) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo biomask 0 netmask 0 ttymask 0 ioapic0: pin 17 shares different IPL interrupts (40..90), degraded performance pctr: user-level cycle counter enabled dkcsum: wd0 matches BIOS drive 0x80 root on wd0a rootdev=0x0 rrootdev=0x300 rawdev=0x302 auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz -- Derick Siddoway As you are aware, the method you choose to employ is down [EMAIL PROTECTED] to nothing more than how best to bypass the particular filters your company has decided - ineffectively, but still to its lasting shame - to employ. (Mil Millington)