Hi,
I recently installed OpenBSD 3.9 on a PC(dmesg.log attached) which should
act as gateway for a small home network. The setup of pf, the config-file
for ppp to connect to our ISP, and the system setup (rc.conf.local) were
copied from a different machine running OpenBSD 3.6 which currently acts
as gateway but should be replaced by the other machine.
After booting, the machine works fine for about 15min. Thereafter the
connection through the DLS-modem to the internet is down. According to
'top', ppp and pppoe are in sleep state, but I do not know whether this is
the reason.
Killing ppp and restarting it does not help.
The phenomenon occurs with apm enabled and disabled. It is not due to the
network card for I had also installed a different network card (a 3Com
3c905b instead of the VIA VT8233).
Would anyone have an idea how to fix the problem?
Tim
--
Tim Gruene
Institut fuer anorganische Chemie
Tammannstr. 4
D-37077 Goettingen
GPG Key ID = A46BEE1A
OpenBSD 3.9 (GENERIC) #617: Thu Mar 2 02:26:48 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.20GHz ("GenuineIntel" 686-class) 2.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem = 259567616 (253484K)
avail mem = 229863424 (224476K)
using 3194 buffers containing 13082624 bytes (12776K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(3c) BIOS, date 10/01/03, BIOS32 rev. 0 @ 0xfb4c0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xdf44
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdec0/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 3 5 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8751 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8633 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 ProSavage DDR" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
sis0 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 11,
address 00:14:6c:30:8b:1c
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 12
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 5
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
iic0 at viapm0
"unknown" at iic0 addr 0x18 not configured
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST340015A>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CDRW/DVD SM-352B, T806> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 12
ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
audio0 at auvia0
"VIA VT82C686 Modem" rev 0x80 at pci0 dev 17 function 6 not configured
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11, address
00:e0:4c:b7:dd:45
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI 0x004063,
model 0x0032
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
