Hi
I'm trying to install a snapshot on a Dell PowerEdge 6300 using the
floppyB boot disk.
Unfortunately, the Adaptec AIC-7860/AIC-7890 SCSI Host adapters aren't
being configured so I cannot setup the disks. According to
http://openbsd.org/i386.html the AIC-7860 and AIC-7890 are supported
by ahc(4) so I'm confused why I can't access the disks.
Below is the dmesg from the machine. Please let me know of any other
information I can gather that might be of use in fixing this.
Thanks
Tom
OpenBSD 4.0-current (RAMDISKB) #76: Sat Oct 21 21:04:41 MDT 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISKB
RTC BIOS diagnostic error 2b<config_unit,fixed_disk>
cpu0: Intel Pentium III Xeon ("GenuineIntel" 686-class, 1024KB L2 cache) 551 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 1073307648 (1048152K)
avail mem = 974331904 (951496K)
using 4256 buffers containing 53788672 bytes (52528K) of memory
RTC BIOS diagnostic error 2b<config_unit,fixed_disk>
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 02/12/03, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.2 @ 0xfa9b0 (102 entries)
bios0: Dell Computer Corporation PowerEdge 6300/550
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc7a0/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xd4000/0x4000
0xd8000/0x800 0xdc000/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 ignored (disabled)
pciide0: channel 1 ignored (disabled)
"Intel 82371AB USB" rev 0x01 at pci0 dev 2 function 2 not configured
"Intel 82371AB Power" rev 0x02 at pci0 dev 2 function 3 not configured
vga1 at pci0 dev 4 function 0 "ATI Mach64 GI" rev 0x5c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
fxp0 at pci0 dev 6 function 0 "Intel 8255x" rev 0x05, i82558: irq 14,
address 00:90:27:b8:cb:30
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 0
fxp1 at pci0 dev 10 function 0 "Intel 8255x" rev 0x05, i82558: irq 11,
address 00:90:27:b8:cc:26
inphy1 at fxp1 phy 1: i82555 10/100 PHY, rev. 0
pchb0 at pci0 dev 16 function 0 "Intel 82451NX Mem & IO" rev 0x03
pchb1 at pci0 dev 18 function 0 "Intel 82454NX PXB" rev 0x04
pchb2 at pci0 dev 19 function 0 "Intel 82454NX PXB" rev 0x04
pci1 at pchb2 bus 1
"Adaptec AIC-7890/1 U2" rev 0x00 at pci1 dev 4 function 0 not configured
"Adaptec AIC-7890/1 U2" rev 0x00 at pci1 dev 6 function 0 not configured
"Adaptec AIC-7860" rev 0x03 at pci1 dev 8 function 0 not configured
pchb3 at pci0 dev 20 function 0 "Intel 82454NX PXB" rev 0x04
pci2 at pchb3 bus 2
"DEC Compaq SMART RAID 42xx" rev 0x01 at pci2 dev 5 function 0 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask b7e5 netmask ffe5 ttymask ffe7
rd0: fixed, 3800 blocks
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
